Having problems with your Dishwashers ?

MacMarkus, I just got parts for the dishwasher. I put the circ pump in and no water enters the dishwasher. I also see that I didn't put a plastic cover on one of the leads, so I need to pull the dishwasher to do that. How do I know if I've installed the pump correctly?


Answers :

Hi look to have even an even chance of repair one simply must get a service manual for the unit you are working on. Simply Google the exact make and model, plus the words...... "Your-make-and-model" service manual pdf download (enter)\015\012
\015\012
\015\012If there is NO water coming in, then it can only be The Inlet solenoid, either NOT being commanded to work, or it is stuck, remove, and soak in penetrating oil for a while, clean and replace to try again. \015\012
\015\012The pump really can only go in one way.. but again, you DO need the manual to check.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

MacMarkus, I just got parts for the dishwasher. I put the circ pump in and no water enters the dishwasher. I also see that I didn't put a plastic cover on one of the leads, so I need to pull the dishwasher to do that. How do I know if I've installed the pump correctly?


Hi look to have even an even chance of repair one simply must get a service manual for the unit you are working on. Simply Google the exact make and model, plus the words...... "Your-make-and-model" service manual pdf download (enter)\015\012\0 ... Dishwashers

Pump problems I had a fairly light load of dishes that needed to run so I thought I'll put some plastic fruit on the top rack to also get clean. Well, when the load was done and I opened the door everything was covered and I mean everything with a whitish substance aka wax! One of the fruit was made of wax an melted all over the entire interior of the dishwasher. We had 30 people now arriving for dinner so I just left it all alone. I should have run it again immediately but I didn't. Now after r


Hi murrie825,\015\012\015\012I'm Harvey the Master Plumber.\015\012\015\012Your problem is: you can't get the pump to drain and can't figure a way to get at it.\015\012\015\012It sure sounds like the pump is clogg ... Dishwashers

My 2008 frigidaire 24" dishwasher model #FDB1050REC is not washing during the cycle. I have run the test cycle and the tub is filling up and draining but no washing is taking place during the wash cycle. The dishwasher has an electronic control board and therfore no mechanical timer. I put test leads to check for voltage on the power leads to the main washing pump, which I have already replaced with a new one, and I'm only registering a low voltage of around 10 or 11 VAC. With the cycle off I'm


If you have replace the motor and this did not fix your problem then yes replace the control board ... Dishwashers

Our church has a Toastmaster Commercial Dishwasher with a Franklin Electric recirculating pump assembly that is making a bearing noise. We may need a new pump motor or pump. Do you know where we might get one?


... Hobart 41 in. AM14-255 Free-standing Dishwasher

I have a go kart with a honda power washer motor that I just purchased.It lacks power at start and stalls alot.Put new pull in,sprayed carb cleaner,adjusted carb,new air filter,need to know if it need a fuel pump and were to get one


Hondas are gravity feed no pump needed .You might need to clean the card though. ... Karcher 2500 PSI Pressure Washer

Hello, I purchased a Kitchen Aid Architect II series KUDSO3FTPA3 ~ two years ago. It is deigned so you can put your own panel on it. Duw to a design issue with my cabinets I was not able to add my own panel and wanted to purchase the stainless panel to cover the front of the dishwasher. Kitchen aid was no help, they sold me a panel that would not fit and then would not take it back! Then they said I would need to replace the entire door for $389.00! I need to know if there is a stainless


There is a MUCH better way! go to www.applianceart.com, these guys have tons of panel options including stainless and fax stainless that was featured on HGTV and the Today Show. www.applianceart.com (Appliance Art) ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I need to replace my Bosch dishwasher motor and pump assy, and need to get information on the procedure to do so. I know I have to pull it out, and turm it upside down or on it's side, but after that...I'm Lost..Can someone give me the procedure on this SHX46A05UC/14


Whats wrong with it? check out this link:\015\012http://www.squidoo.com/Bosch_Dishwasher_Drainage_Problem_Fixes ... Bosch 24 in. SHX46A05UC Built-In Dishwasher

I need to put the lower pieces of my dishwasher back correctly.


Try this website:\015\012 ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Dishwasher pump Hi, I would want to know what is the common nominal power (WATT) of the motor-pump group of a domestic servant dishwasher. Someover I need to know tha name of dishwasher pump's constructors and (if possible) have their catalogs: are they the same brands of the dishwasher? Thanks a lot Costantino


What?.. ... Dishwashers

The cover of the detergent dispenser does not latch properly and will flip open. The dishwasher is 6 years old and I think we need to replace the dispenser assembly but don't know how to take it off the door and put it back. The model number is GU1500XTKB0 Thank you for your help.


I've posted this before. The latch just needs a good cleaning. In the past, something placed in the washer kept the door from opening properly, which caused detergent to dry under the latch. This has happen several times until I figured it out. Don't ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

My brother needs the faucet adapter for his DDW396 counter top dishwasher (forgot to take it off faucet when moved). Have the quick disconnect but not piece for faucet. I tried to find it online for him but don't know which one is correct and Danby doesn't seem to have a parts store.


I did the same thing when I moved. I went to Home Depot and was able to pick up a replacement nozzle there. ... Danby DDW497W 22 in. Countertop Dishwasher

We need to replace the locking ring in the bottom of our Asko 1716 dishwasher.(It's cracked) I can only find one kind of replacement ring for that,but it looks like the right size. I need to know if Asko uses one ring for more than one model of dishwasher?It's a 5" locking ring for the bottom well of the tub. Thanks for your help!


Only 1 size ... Asko D1716 Built-in Dishwasher

I NEED TO get information on 2 of your older dishwashers. DU945PWKTo and DU945PWKTo. The information I'd like is: which one is quieter, how old are they? I am in need of a trmporary dishwasher while I am doing a remodel and either of these is available for me now. I just need to know something about each one so I can make a choice. Thank you. Ande


Hi\015\012\015\012Great that you require the information however, as both\015\012models are same so please post back with the serial no for both of them\015\012respectively for further assistance.\015\012\015\012Daniel ... Whirlpool Dishwashers

Operations manual Need to know where i can get a manual for my dishwasher as when we bought the house, one wasnt provided. Dont know what the cycles are all i know is how to turn it on and do a full cycle..dont know what the other buttons are for and I LOVE buttons...but...need to know what they are for


Get the model number from the dishwasher. Most brands have websites where you can find owners manuals and print them off. ... Dishwashers

I need to know how to put the pump assembly back


Go to the link provided below and under the heading "Browse Subcomponents" click on the "Pump and Motor Parts" link. I think that shows what you're looking for. Otherwise, check the other diagram links for your model on the same page.\015\012 ... Kenmore Dishwashers

Not getting enough water flow into the dishwasher, suspect that a filter is clogged due to recent work on the waterline in the kitchen sink. Need to know where the filter might be located (on the dishwasher or on the intake valve before the connection to the dishwasher hose)? Also would I need to disconnect the water supply to pull out the dishwasher for access to such a filter.


You didn't specify a brand but most dishwashers don't have a water "filter." They may have an inlet screen at the water valve, which is typically located under the dishwasher. Generally, the lower front panel will have to be removed and you should ... Dishwashers

I have two questions and would greatly appreciate some help: - What oil to use in the pressure pump of a Ryobi Pressure Washer RY80030? - How much to put in? The pump model is MTP092150 from FAIP. As per the manufacturer, the oil is not to be changed or topped up by the end-user, I know, I know, but brought to a service center instead - I certainly don't want to do that, and there is none close to my place anyway. The reason I need this is that I had to take the pump apart and a


... FAIP Non Marking Pressure Washer Hose 4000 Psi, 50ft. Length

Dishwasher flood I have a whirlpool "Queit Partner I" type dishwasher. When I used it for the first time it flooded my kitchen floor. I had to stop in the middle of everything. What do I do from here. Not sure if I put in the correct detergent or if I put too much in. Never had one of these things before. I was always the dishwasher...help...I can be reached at [email protected] Thanks for your help.


... Dishwashers

I have a Whirlpool DU810SWLQ0 that will not drain. I've pulled the unit out, snaked the drain tube, pulled the motor/pump, and pipe assemblies, and cleaned the food trap, which I also removed. I've run the dishwasher with a bit of bleach, and the water will pump in, get processed by the agitator, and be heated. When the rinse cycle comes, dishes get covered in food, and are never clean. Waste water was being used for a clean rinse. I've run the dishwasher with the drain dangling in a bucket,


Refer the wash system assembly dwg. Check if the ball (item 21) is sitting correctly. If it is out of ali ... Dishwashers

My Brada portable dishwasher does not clean the dishes very well. Also the racks are very hard to pull out and put back in, very frustrating. When pulling the racks the whole dishwasher moves. I am not very happy with this product. Would never by another one.


... Dishwashers

My Maytag PDB3600AWX isn't working. The motor hums as if its working but no water is in the tub. I did put a pitcher of water in the tub to see if it would pump out and it does. I don't know what else to check for. We have had lots of problems with this dishwasher, its never washed the dishes well and has flooded my kitchen to the point of having to replace flooring. I thought its was because we had just had new flooring installed and when they put the dishwasher back in the counter the hose was


... Maytag PDB3600A Built-in Dishwasher

I'm trying to find the correct filter for a Bosch dishwasher Model SHE55M02UC. I find two different one's online and am not sure which is the correct one I need. Thanks


... Bosch Evolution 500 SHE55M05UC Stainless Steel Built-in Dishwasher

I have LG dishwasher for 2 years now. Working perfectly until one day one glass gets broken during washing cycle. Immideatly we get EO error. We check possible reason of error in the manual then decided to try to fix ourself. We open bottom cover and drain outcoming part. Immideatly we discover a piece of glass that was preventing a small plastic piece to rotate. We remove that piece of glass. Put back covers and machine. We connected it back to outlets and run it. All was working again !!! This


In order to fix problem we disconnected dishwasher, put it on one of side, opened bottom cover - the one that is outside of dishwasher. We find out the part that is\015\012connected to the drain horse. We take of 3 screw and open that part too ... LG Dishwashers

Top arm does not turn in most of gibson amana an frigidaire this is done by ball in bottom of pump .it is clean.spray arm are clean .bottom arm move all the time.timer works it hesitates every so often and so ball will move an water should go up to upper arm but doesnt.common problem on these units but dont know how to cure?change ball.didnt work..on one unit changed pump cure problem for 4 months then returned....also does anyone know were u can buy the plastic they used to sell for dishwashers


Can yo give me the make and model number sol I can look at the service manual for you? ... Dishwashers

I have Frigidaire model FDB130RGS3. This seems like a pretty cheap dishwasher that is provided by my management company. This is third dishwasher I've had in this apartment. The others have all broken. Now this one, which is less than 6 months old, seems to have broken. It does not clean the dishes. I removed the round plastic cover in the base of the dishwasher and the bottom of the dishwasher (sorry don't know how else to describe this) is filled with dirty water. I drained the water and tried


Hi,\015\012\015\012the round plastic cover in the base should just push back on, but you need to make sure it is correctly rotated before doing so. It should look like this:\015\012\015\012\015\012 ... Frigidaire FDB130 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2218 seconds