Having problems with your Dishwashers ?

Dishlex 560 ecosave beeps when I plug it in but no lights . .


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishlex 560 ecosave beeps when I plug it in but no lights . .


... Dishwashers

Dishlex Global 310. Was working okay, then stopped with all lights on the right hand side flashing and a regular beep. No response when any other buttone pushed so I turned the power of and on and heard a beep but no lights or response when any buttons pushed. Held 'pause' and 'program' buttons down together but no response. Can you help?


Hello Rob. The Dishlex is made by electrolux. If yours is rather new you have a 2 year warranty on labour and a 10 year warranty on parts. that being said, if yours is under warranty working on it yourself will void the warranty. \015\012 ... Dishwashers

I have a 10 year old Electrolux Dishlex Global 300. It doesn't complete a cycle, beeps many times then all lights go off and it stops. Then you cannot select a program to restart. It then beeps consistently throughout the day when not even in use. A repairman has tried adjusting electric wire connections, the door handle and checked for motherboard diagnostic faults (which shows nothing). Any ideas?


Hi mndl, it sounds like what happened to mine, it was the flood switch F1good luck slappa ... Dishwashers

Dishlex global 300 flashing eco light. i took the front of to fix broken handle while dishwasher was still plugged in. blew circuit breaker in house and now only the light labelled 'eco' flashes and no buttons respond. have I stuffed it?


I have a ge dishwasher that wont let water out like its supposed to. this morning i got up to water on the floor and water still in the bottom of the chamber what do i do to solve this problem ... Dishwashers

Model GLD6500L00BB Dishwasher was beeping after the cycle started. I opened it up and reclosed it to make sure it was latched tightly. That did not work. I then unplugged it and plugged it back in and now it won't work at all. The panel does not light up or anything. Any suggestions on what is wrong? Thanks!


... GE Dishwashers

Hi, I have a Dishlex Global 300 which has just stopped powering. The power supply is fine ( I plugged in other appliances and they work) but the machine is just dead, no lights, no sounds, nothing. The door closes OK. There have been no leaks, burning smells or any other problems with it. What to do? Please help! Thank you in anticipation.


Hello it,ll will be the on/off switch easy to replace and costs about 10-15 bucks youll probally see a char mark on the connector, where it over heated and shorted out. ... Electrolux Dishwashers

Hello I have a dishlex 450 global, it was not working properly with no display on the screen when I plugged it in it just beeped continuously with no display on the screen. I pulled the cover off and the active wire was broken and the r56 diode was burnt out also it had a random black wire just hanging there. Is this fixable. my email is [email protected] Thanks


... Frigidaire 24 in. FDB126RB Built-in Dishwasher

I have a Dishlex Global 300 dishwasher that stopped working mid-cycle. I had to sponge out all the water. Now none of the buttons do anything and none of the lights come on. When I turn it on at the power outlet it gives a single beep, but I cant get it to do anything else. I've opened it up and there is no water or dampness anywhere inside. Any ideas?


It is your control board inside your dishwasher. ... Dishwashers

I pressed the POWER button to turn on the dishwasher. I pressed the SELECT button, hit HEATED DRY button and the LIGHT WASH buttons. I then hit the START/PAUSE button to start the cycle. All lights came on as normal & I heard the machine trying to **** up water like it normally does. Within 5 minutes or so, the machine started to BEEP & BEEP every minute. When I came to the check why the beeping noise was on, I saw that all the WASH PROGRAM lights were all blinking. I hit the START/PAUSE


... Haier ESD210 / ESD211 Built-in Dishwasher

We have a Whirlpool dishwasher model ADG7550. It runs ok for a few minutes then it switches to the rinse setting (i.e. the furthermost left light of the temperature lights, i.e. lights from the left, 'rinse', '40degs', '50degs', '65degs', '70degs'. We may set it to start at e.g. 65degs, it does so ok for a few minutes then it switches to the 'rinse' light and starts to beep every few seconds. There are 11 beeps.


HI, There are two areas of concern here. This will be an issue with either the element, or control sector. I suggest to start with the element inspection. This will requir you use a multimeter, if possible. You will need to varify proepr element func ... Dishwashers

Hotpoint BC145 Dishwasher not cleaning starts to kick in but then just sticks on the "R" light flashing and cannot reset even after turning off. Itbeeps when pressing the select button sound weaker and shorter than they used to and the light does not move from the "R". On a couple of times I have tried it has reset and then the dishwasher starts but after about 3 minutes there is a low beep(not the usual beep when a programme finishes) and the washer stops and the light is flashing on the "R" ag


... Hotpoint 18 in. BCI45 Slim-Line Built-in Dishwasher

I have a Triton dishwasher. Last cycle, it completed washing then started drying and started beeping and the drying light is flashing. When I finally opened the latch, the beeping stopped, but the drying light is still flashing. The dishes were clean and warm - they air dried the rest of the way. I have not been able to get the drying light to go off. I have turned the breaker off over night, and flipped back on. The dishwasher goes back to flashing washing, and then clicks to drying and th


Hi,\015\012Make sure the salt level is ok - add 1Kg of salt if you have not done it in a while, and check rinse-aid level if apliccable.\015\012\015\012If this does nothing, then remove the lower kick panel for access to a data shee ... GE Dishwashers

Our Matsui MF160 will not stop beeping. When you put the power on it beeps continuously. It comes on and hums but doesn't start, no water comes out. The Salt and Rinse Aid lights were on at the beginning but we have filled both of them, the lights are now off, but the beeping continues?? Can you help?


... Dishwashers

Hoover HEDS 668 dishwasher all four lights flash and beep whilst the machine drains, after a couple of minutes the beeping stops but the four lights glow. Cannot reset to cancel. Also still makes draining noise whilst the door is opened. There is no water at the bottom of the machine.


... Dishwashers

Seems like the washer is not getting power. The cord has a big plug with two buttons with little lights. Lights do not go on. I think they did at on point. Is the plug toast or is there some trick or could it be another issue?


The lights are gcfi circuit interupter indicators you should be able to push them in to reset them if they dont check where you are plugging them in to see if that is causing the problem. ... McCulloch FH160G Pressure Washer

Hoover HEDS 668 dishwasher all four lights flash and beep whilst the machine drains, after a couple of minutes the beeping stops but the four lights glow. Cannot reset to cancel. Also still makes draining noise whilst the door is opened. There is no water at the bottom of the machine.


... Dishwashers

I have a GE pdw9880 dishwasher with the hidden soft touch pad buttons. All the buttons light up and beep and go through their selections except for the start button. The start button doesn't light up or beep and the dishwasher doesn't run. Do you have any idea what might cause this? Thx


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Hello, my slimline, Hoover, HEDS 668, AAA class, dishwasher is playing up. During a wash cycle, my meter tripped. When I put the power back on, all the light were flashing and beeping. The beeping stops after a while and all the lights stay on. It sounds like it is trying to fill up or drain or something too, but that soon stops. The filters are clean. What could be the problem? Hazel Stenson-Pickles


... Hoover Dishwashers

PROBLEM! Hello, When we turn on the dishwasher and set it to any setting it beeps once, appears to work, then beeps again, and the first light flashes. Then the inside noises stop and the light continues to flash until it is turned off. We have cleaned the filter, and added salt, but this has not affected it at all. Please help! Thank you.


... Indesit 18 in. D41 Slim-Line Free-standing Dishwasher

When I turned the dishwasher on the lights started blinking and making a noise. When I opened it back up, lights are still blinking and now it is beeping every 30 seconds. I have tried to reset the dishwasher and have even unplugged it. It is still blinking and beeping. Any suggestions?


... GE GLD4100MBB / GLD4100MCC / GLD4100MWW Built-in Dishwasher

Indicator lights on Maytag dw model mdbh 955 do not light up. Plugged into live plug. Door is engaged and clicked shut. It's like there is no power to the unit but there is. Is there a reset button I need to check or a fuse?


Hi,Follow the steps :-\015\012\015\012\015\012\015\012\015\012Power from the house\015\012\015\012Is\015\012there power getting to the dishwasher? This can be difficult to test,\015\012because dishwashers are usually wi ... Maytag 24 in. MDBH955AW Built-in Dishwasher

Haier dishwasher CDW300SS beeping 10 times and 4 lights flashing,,, help The dishwasher will work, it fills, it washes and it empties, BUT will not start now, and the 10 beeps and the four lights flashing,, so wont restart and go throught the program... Is there some way of resetting the dishwasher to restart. help thanks. glenn


... Haier Dishwashers

Baumatic BFD45W got part way through a cycle and the just stared beeping with the lights flashing, now even when it gets unplugged, when turned on it just beeps with the lights flashing. any ideas?


... Baumatic 24 in. BFD60SS Free-standing Dishwasher

I have a GE dishwasher with front control panel and at first the wash and dry lights stayed on and it was beeping every 30 sec. when I turned the breaker off for the required 30 sec. the lights started flashing and it is still beeping. The control panel seems to be frozen as it is not working and wont do anything.. everything was working fine before this. I bought it at Home Depot on 3/14/07 and had it installed by a licened electricion. Help


Call ge @ 800-386-1215 for service ... Dishwashers

MY DISHWASHER MODEL GHDA480N10WW LIGHTS ARE FLASHING ON THE NORMAL WASH AND THE HEATED DRY I OPENED THE DOOR IN THE MIDDLE OF THE DRYING CYCLES THE LIGHTS STARTED TO FLASH AND BEEP I UNPLUG IT TO SEE IF I COULD RESET IT AND IT STILL BEEPS AND FLASHS


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1047 seconds