Having problems with your Dishwashers ?

Whats the combo for the safety switch on my moffat dishwasher. its a push button on front but im sure there is some sequence. and it does not say safety switch either...


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whats the combo for the safety switch on my moffat dishwasher. its a push button on front but im sure there is some sequence. and it does not say safety switch either...


... Dishwashers

I put dish soap in my thermador dishwasher on accident. It is now saying e15. The thermador customer service says a safety switch turned on and a technician needs to come out. Can I just flip the switch?


... Dishwashers

Program stops When the machine is switched on it runs for a minuite or so then stops and bleeps and shows blanks - - - - I switch it off and again re-start and it again repeats this as above the filters have been cleaned and the water was drained and again it persists, the machine is 3 yrs old. I tried a sequence described as switching the programm button in 4 quick times but this didnt work either. Is there any other way we can re-programe this dishwasher or is it that there is a fault where so


... Smeg 18 in. DWD409SS Built-in Dishwasher

My dishwasher is beeping 5 times with a pause in between, I can't get it to do anything now, each time I switch it on it just beeps at me. In the manual it says that the 'flood switch' has been activated, I' not sure why, or even what this is, but I'd really like to deactivate it.


It would help to know the make and model number of the dishwasher.\015\012\015\012Flood switch can be at different locations depending on the model.\015\012Are there any lights flashing on the panel as well? ... Dishwashers

I wanted to heat up a cup of tea. As I've done many times before, I pressed Time, then 1:20 seconds, then I pressed Auto Start, but fear I may have touched the button below it, which says Start in small red print. The oven wouldn't switch on, and I noticed a small green u-shaped mark had appeared at the base of the 1: I pressed Clear, and repeated my movements, making sure this time that I pressed Auto Start. Again, nothing happened. I've cleared the touchpad several times, but the oven won't


... Danby 22 in. DDW399 Free-standing Dishwasher

GE Dishwasher - front door assembly - GSD5420G00WW - Took the front door apart to check the wiring as d/w was acting erractically (not draining fully, not obeying pushbutton commands every time). Everything seem OK, but now not sure how the detergent latch lever and the sequence switch lever fit together to reassemble the door. Help, please. Rick


... GE Dishwashers

Starts instantly. If moved or shut off manually, will not re-start. Very aggrevating. There must be a faulty safety switch. Where is this safety switch located? Please help!


There is a low oil level sensor on the opposite side of the engine as the oil fill / dipstick. The next time that your presure washer acts up disconnect ONE wire to the oil level sensor. On pressure washers mose engines have the oil level sensor re ... Dewalt DPD3100 Gas Pressure Washer

Hi My dishwasher seems to get stuck in a cycle when you start it - it lets water in for around 20 secs - then pumps it out - then lets water in for say 20 secs then pumps it out - over and over and over... Model - says electronic on the front, has a rotary selector switch and a power switch on the panel along with three indicator lights. SGS43EO2ZA/16 Type S1501B Can you advise? Gerard


Hello Gerard,\015\012\015\012This is an overfill 'fault' generally caused by one of the following:\015\012\015\0121. Faulty or incorrectly installed flow-meter\015\0122. An airlock in the fill chamber ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

HOD6615 Vision one dishwasher - water is not heated, errors after 15-20 mins. Element seems to meter out ok, is this more likely to be the safety switch or control panel, any tests to prove. Could anyone tell me what part the safety switch plays in element connection.


... Hoover Dishwashers

I have an older under the counter high temp dish washer not sure the model number but it has the three switches on the lower left, has both upper and lower wands and it is high temp. Not for sure but it seem like the homing cam switch is not working you can manually turn the came to get machine working but when it shuts off it wont restart when you close and latch the door could you please help!


The cam switch may be faulty and may be available for replacement.\015\012\015\012Hard to find replacement without model no. but for the current model it is available ... Moyer Diebel Dishwashers

When you switch the dishwasher on, where the programme time cones up it says F. we tried to switch it on n restart again but it still says F and makes noise


Says here the overflow pipe night be blocked and needs to be cleared. When it's cleared if you still get a code "F" and it is still trying to pump dispite no water then remove the side panel and you will more than likely see you have water in the bas ... Neff 24 in. S5453X1 Built-in Dishwasher

Dishwasher will suddenly start "beeping" intermittently at several second intervals when not in use. Controls will not funtion at times, then will suddenly be OK, and run through a full cycle perfectly. Later will do the same all over again. I have replaced sequence switch, but no improvement. Does it need a control panel, and if so, should original sequence switch be OK?


HI. That original sequence switch shoudl be ok. This will essentially be a control panel issue. There may be one or two button circuits that could have become unstable,thus, causing the intermittent beeping. With that said, i would like to examine th ... GE Dishwashers

I have a Whirlpool Quiet Partner 3 GU2200XTSB3 dishwasher that starts but wont complete a full wash cycle. I went to diag mode and the follow light sequence appeared: Normal light and washing light came on, then switched to Rinse only and drying then back to normal light washing this sequence repeated 3 times then no lights then Light and heated dry followed by the normal light flashing repeatedly for an long period of time then switched to Light and heated dry then all lights went out I was t


... Whirlpool GU2200XTSB GU2200XTSQ 24 in Builtin Dishwasher

Bosch she4am Unit starts briefly, then stops about a minute into the operation and lights the CLEAN led. I located the diagnostics code paper, ran the test a few times, and come up with the same code...the CLEAN led lit indicates a door switch problem. I removed the door switch, it's a magnetic hall effect transistor..seems to work but not sure it's showing proper voltages. It reads 8vdc or so across the switch with door open, and about 11.7vdc with door closed. Seems too narrow a range to me


... Dishwashers

Indesit d63 dishwasher, door locked shut. took top off+got to latch, the plastic catch wouldn't pull out of the latch. undid it all, all seems unbroken but cannot seem to arrange the latch so that it will allow the plastic catch to come out when levered. also not sure if the handle is supposed to click the switch to another position, or just tweak the switch as it opens the door. is a new latch supplied with the switch ?


Check with whoever you order the latch from, usually parts are individual for electrical parts and never assume that the screw or washer will come with new one, save every piece. ... Indesit 24 in. D63 Free-standing Dishwasher

Hi, ^The GE dishwasher (PDW788000SS) will not fill in either "rinse only" or "normal wash" modes. The control panel lights up with all functions. After selecting rinse only or normal wash and pressing/holding the start/reset button down for several seconds to reset the unit the drain pump comes on for approx 90 seconds as advertised. Checked the float switch and there is no continuity in any position of the little switch arm and the switch arm has no spring on it. Seems like this is a faile


Hello there:If there's no water entering your dishwasher in these cycles as you described, check these:\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 ... GE 24 in. Profile PDW7880G Built-in Dishwasher

Asko Dishwasher starts the cycle by pumping out as it should. But does not stop pumping nor advances. If I click it forward manually it starts to fill and then before overfilling goes into pump out without washing then just repeats this. Pressure switch tubes and air trap chambers are clean and no leak to trip spill switch. I'm guessing It is either the timer or faulty pressure switch any clues ???


If has "mother board" then water could have got in.\015\012\015\012Here Asko is low cost make so check cost before serviceman calls & charges & charges and so on. ... Asko D1706 Built-in Dishwasher

My PLEB30m9ec microwave has burned out two door safety interlock switches in 4 months. It works well otherwise. The second switch appears melted. switch or oven?


... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Neff dishwasher will not switch on , checked fuses etc and positive that power is going to the machine but will not switch on,is there any safety feature such as blockage or otherwise stopping machine from switching on, red lights not coming on, machine 4 years old and very little use? can u help


Just went through this myself. It could be a latch switch. Open the door undo the screws that holds on the inside door panel remove the latch. The 2 black boxes with wires attached are the switches. Take them out (use your camera so you know how to p ... Neff 24 in. S4443 Built-in Dishwasher

Clean light comes on my Kenmore Elite Dishwasher Model # 665.17263. This happened once before and has to do with the heating element. The service guy showed me how to press the buttons in a certain sequence to "unstick" the unit and it worked fine. The Quick Rinse light keeps flashing. When I push a previous sequence recommendation it switched to pots n pans and Quick Rinse and Cancel all started blinking. Then in about 2 minutes went back to Quick rinse. I did one sequence and it started to d


It seems that there is something stucks in your dishwasher...is there any error code? ... Kenmore 24 in. 15079 Built-in Dishwasher

Dishwasher malfunction I have a Kenmore Ultra Wash Quiet Guard 3 dishwasher. One day, I found it with a blinking green ?clean? light. I went online to search for the manual, almost impossible to locate. Found a website where another using said to hit a 4 button sequence of ?heated dry? ?normal wash? ?heated dry? and normal wash. After this sequence, all lights went on and something that looked almost like a ?demo? sequence began (not sure now what that was). I hit ?cancel/drain? and it proceeded


Hi,The flashing light indicates that the control did not sense a 3 degree temperature rise with an 8 minute test. There are many reasons this could happen with a working heater. I put together a page that shows the reasons and you might b ... Kenmore 24 in. 15689 Built-in Dishwasher

Hi can you help me please I have a Zanussi DX6453 dishwasher which has stopped working. Having used the diagnostic facility it has come up with anti flood device, I have done the usual rocking the machine back and forth no sign of water. I have taken the machine apart and looked at the anti flood switch and this is bone dry and by lifting the float you can hear the switch clicking on and off. When I reassemble the fault is still there I'm begining to think the switch is faulty but not sure, do


... Zanussi 23 in. ZDT6255 Built-In Dishwasher

My Indesit dishwasher needs to have the micro switch aquastop replaced but not sure which wire goes on which contact on the switch. Two wires , one pink and one brown.


... Indesit 24 in. DI67 Free-standing Dishwasher

Water leaking on floor Blanco BFDWC65 & shorting safety switch


... Dishwashers

Zannussi de4744 switch on dishwasher but it just hums seems to have washed but not full cicle and ideas chaps cant switch off says ready but hums


Aquastop on water inlet tripped. Turn off and slightly undo main inlet hose. find water inlet valve and remove thin pipe from nipple. Turn m/c on for a few seconds, turn off and replace all pipes m/c will now fill and continue ... Zanussi 18 in. DE4744 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0831 seconds