Having problems with your Dishwashers ?

Dishwasher model 16362, turns on, but does not fill with water and has a buzzing sound a few minuets into cycle, then smells like burning plastic. Took the front panel off, no spec sheet in plastic bag. I don't know what to do, is this machine toast? Almost 7 years old.


Answers :

Hi,
\015\012
\015\012The dishwasher is probably not toast but the fill valve is...and the hot smell is the heating element coming on with no water in the dishwasher...
\015\012
\015\012I would check out that fill valve and see why you are not getting any water in your dishwasher...
\015\012
\015\012

Dishwasher Trouble No Water entering Dishwasher

heatman101

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher model 16362, turns on, but does not fill with water and has a buzzing sound a few minuets into cycle, then smells like burning plastic. Took the front panel off, no spec sheet in plastic bag. I don't know what to do, is this machine toast? Almost 7 years old.


Hi,\015\012\015\012The dishwasher is probably not toast but the fill valve is...and the hot smell is the heating element coming on with no water in the dishwasher...\015\012\015\012I would check out that fill valve and see why ... Dishwashers

When pressing any front button on the control panel nothing will light up or start up in any manner,does look like it did not finish draining,have water sitting in the bottom. Pulled off front access panels no signof burned wires or anything becoming disconnected? do have small childern in the house pressing buttons? power is good going to unit.??


1)check any fuse blown in board.\015\0122)check supply to the board. ... Kenmore Dishwashers

Dishwasher will not finish/start a cycle. The washer filled with water and during the cycle I heard a pop like someone knocked something over in the kitchen. I smelled an electrical burning smell. All the lights and the buttons work on the front panel, but when I try to start I hear an electrical buzz like it is trying to start, but nothing happens and after 3 seconds the electrical buzzing stops and the lights on the panel flash. I removed the dishwasher and found that when I hit the start butt


... GE 24 in. GSD3960LSS Stainless Steel Built-in Dishwasher

My GSD3600 GE Dishwasher will not finish/start a cycle. The washer filled with water and during the cycle I heard a pop like someone knocked something over in the kitchen. I smelled an electrical burning smell. All the lights and the buttons work on the front panel, but when I try to start I hear an electrical buzz like it is trying to start, but nothing happens and after 3 seconds the electrical buzzing stops and the lights on the panel flash. I removed the dishwasher and found that when I hit


Hello Greg,\015\012\015\012Your diagnosis is pretty good, but the buzzing suggests it may be the capacitor for the pump motor that has failed rather than the pump motor itself. The capacitor phase-shifts the AC current for starting the mo ... GE 24 in. GSD3960LSS Stainless Steel Built-in Dishwasher

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

My bosch dishwasher's (model she45m) front control panel broke. When opening the door, some plastic broke and the front control panel cover came loose. I believe the latch is preventing the plas


... Bosch SHE45M06UC Built-in Dishwasher

I bought a used 001355 asko dw. the front door panel and all under panels are naturally loose and I'm having trouble figuring out the reassembly order. And then as I was trying to install the main galvanized under panel, a short galvanized sheet metal part fell out of the door inside the unit. That's the part that now has me really stumped. Can I get a picture of the front of the unit, preferrably an exploded view? Thank you. Paul Cowden. (415) 777-9858 or (415) 302-0628.


... Dishwashers

I have a Fisher and Paykel drawer dishwasher and I'm wondering if there's a way to put a panel on it to make it look like and integrated dishwasher. It would need some way of the panel moving to start the dishwasher because the controls are located on the front. I plan on putting it in an Ikea Akurum that is 24" deep. The dishwasher is 22-9/10 deep, so that looks like it would leave some space for the dishwasher to sit back in the cabinet so the door panel could be flush with the cabinet. I'm no


Hmmmm...the first thing that comes to mind is to check out ApplianceArt.com. they have alot of panel options. I'm not sure if they have the integrated ones you are looking for but they have cheap options for everything else. ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

I have a GE black panel dishwasher. I am having trouble cleaning the panel. It looks like cleaner has dripped down it but no matter what I use it never looks any better. The panel sounds like hard plastic and is in perfectly good shape. It just looks bad. I've tried soap and water and other cleaners but nothing helps.


There is a cheap way to replace the panel and that is on applianceart.com. They have replacement panels and covers, and even stainless steel. ... GE GSD53 Dishwasher

Smeg e2 error (water level tripped). Filter is clean and no rubbish below filter on inside of dishwasher. I have taken the front panel off but am not sure where the float device is located - I am wondering if it is just to the left of what looks like a solenoid. There is no water in the base of the unit in the front panel so would rule out any leaks. Reset program and turned off power at socket but still not using hot water. Possible PCB issue ? Any advice appreciated. Smeg DI612C Dishwasher.


... Dishwashers

Dishwasher GSD2030F03WWSA735136B Model Series number;Piece fell off inside front panel, making it impossible to turn on dishwasher at all..so I took off front panel screws, opened dishwasher and saw white plastic piece but can't find where it goes but it must have something to do with turning the knob to start dishwasher because the knob won't turn now..so it must attach inside somehow but I can't figure out where it goes...help!!


I think you need to get a new knob, write down the model number and make and take the pieces to your local domestic appliance supplier, there might be something similar in stock. Now I do mean the kind of small supplier that understands this kind of ... Dishwashers

Ge triton dishwasherThe front panel has broken right side plastic at the screw. Does it pay to find a replacement front panel or just relplace the approximately 12 year old dishwasher?


... Dishwashers

I would like to remove the panel that is on the front of my asko dishwasher and replace it with a stainless front panel


That panel is reversible. take off an see what is on the other side. a couple of screws. its easy ... Dishwashers

Smoke coming out of front smells like plastic


... Siemens 24 in. SE25A561GB Free-standing Dishwasher

Ok, after a year, I've figured out the problem. I changed a bunch of parts, but never until now figured out that what it is doing is, water is running out the hole behind the door, where the overflow dripguard sits, if the front three panels are on. when those panels are on, water, just before position 6, pours down that plastic dripguard piece, into the big tray. eventually the tray overflows. when you take off the panels, then water just pours onto the floor. if you open the DW, the basin is t


It could be as simple as the float switch inside the wash tub. Usually they are located just inside the bottom front edge of the dishwasher. Some of these are loose and others are enclosed inside another cover. \015\012\015\012You may hav ... Asko Dishwashers

I have a frigidaire dishwasher model FDBC45BAB0. It has a black door (full door, not panel). I would like to either replace entire door panel w/stainless. Or get a stainless panel just for the front. Any ideas? Thanx


Hello! Here is a website that offers a selection of stainless door covers........www.kitchensource.com/kau/frigodw.htmGuru...................saailer ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

How do the back and side panels come off? I have removed the screws from along the front around the door seal and from under the kick plate, but the top panel is somehow just clicked on keeping everyt


... Bosch 24 in. SGS56E02 Exxcel Built-in Dishwasher

Have a GE Quiet Power 3 Dishwasher. Went to reun it and when I closed the door no lights came on to pick a wash cycle. Nothing like it lost power. No buttons work, nothing. Opened door and removed inside door panel. Have power at door latch switch. Actually have power at all 4 connections and doesn't change when engaging switch as if door was closed. Switch does click but no power at front control panel. Whats up. I have my own Handyman/Home Remodeling business and I'm very good at fixing things


If your dishwasher is not running check the following \015\012\015\012You have already taken care of the 1st item.Power Supply The main power supply is the first thing to check. Also remove the toe ki ... Dishwashers

Hi, I have an AEG Favorit 525 dishwasher. It's over 20 years old, but has a panel on the front which matches the kitchen and it has done stirling service over the years. Lately, the knob has been sticking a bit mid cycle, but it has been intermittent. Last night, although the dishwasher sounds like it is working properly, it is not filling with water. Motor sounds like it is trying, but to no avail. If it was human, I would say prostate issues, but I don't think dishwashers have those. A


... AEG Dishwashers

I have an MDB6701AWS3, The buttons on the panel stop working. I see that the ribbon that connects to the control board has a brown tar like substance on it, or it could burned. How likely is this my problem, instead of the control board? Thank You


... Maytag Dishwashers

The control panel on my Maytag MDBH970AW is unresponsive, and the latch is stuck in the "open" position (the plastic piece stays pushed in to the handle and won't come down). I've checked that the unit is getting power from the house. Last time I had this exact problem (when it was under warranty), they had to replace the control panel, the latch, and it seemed like most of the door. What should I do?


... Maytag 24 in. MDBH970AWS Built-in Dishwasher

I would like to replace the front panel with a stainless steel panel. Where can I find one. Thank you


ApplianceArt.com has many stainless options included custom stainless panels for dishwashers. They also have faux stainless options ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Mod# mdb7601aww.... When I press cycle key, say heavy duty, then close door the 2H light flashes. I press the start button and the unit will not start. I have shut it down electricly and get the same results. what can be the problem? The front panel with the start/delay buttons or the inside control panel? I like to figure this on out the first time because each of those parts are $100+.


... Maytag Dishwashers

The control panel seems to have filled with water and it is smoking and smells like something is burning inside of the control panel. It is also warm to the touch. What happened?


... Frigidaire 24 in. FDBB945DC Stainless Steel Built-in Dishwasher

I have a black nautilus dishwasher and would like to replace the front panel with a stainless steel panel. Can this be done?, if so for how much?


Yes it can be done - check out www.applianceart.com, prices vary depending on what you are looking for. ... GE Nautilus 24" Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1037 seconds