Having problems with your Dishwashers ?
My older RCA dishwasher started leaking from the bottom of the machine. Any suggestions and price quotes, if necessary? Thank you. Vicky
Repair Help & Product Troubleshooting for Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My older RCA dishwasher started leaking from the bottom of the machine. Any suggestions and price quotes, if necessary? Thank you. Vicky
I have F&P DD603 with problem with bottom draw. Once a programme is selected and door is closed, the dishwasher beeps three times then tries to start itys cycle. It then starts but stops every 1-2 minutes (like pause botton has been pressed). If you press start again it starts for 1-2 mins then stops again. I have tried turning off the power and totally cleaned out the dishwasher but no change? Any suggestions?
Hi \015\012When you pull out the drawer, pay attention to the bottom near the bottom front panel, you will see a little tab. this tab is at both sides of the drawer, press these tabs in and pull the drawer fur ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
Model #363.14232100 dishwasher. When you turn the switch to on, it will not come on. If you keep turning the knob slowly you can hear the dishwasher trying to start up,but it doesn't. Keep turning the knob and its the same thing, sounds like it will start, but it doesn't. It did fill with water, but once it was opened it didn't start up where it left off. The lock switch was in position, and still nothing. Now I have water in the bottom but can't get the thing to come on. Any suggestions? Help!
... Kenmore 24 in. 16539 Built-in Dishwasher
Hi, My EdgeStar dishwasher suddenly started leaking during the draining process ... looks like a sprinkler down one bottom side. I've removed the hoses to check for a blockage, and checked the screws on the bottom, and those all seem OK. What else can I do? Any helpful suggestion is most appreciated. Liz
Www.edgestar.com/ownersmanuals/DWP40Sownersmanual.pdf - United States\015\012\015\012\015\012\015\012Above is your user manual, below, is the support website for Edgestar.\015\0 ... EdgeStar DWP40S Free-Standing Dishwasher
Dishwasher leaking We bought our dishwasher in Sep/07, it was fine for a year, then started leaking out the bottom of the door on the left. We had the seal on the door replaced (didn't work) and then the door gasket replaced. That worked for less than a year, now it is leaking again in the same place. What could be going on? Have already put $400.00 repairs into this machine and am reluctant to put more money in to have it break again the same way. What do you suggest?
This sounds like a hinge problem to start with.\015\012\015\012Test the seal by dragging a strip of paper through it with door closed. Probably that left hinge isn't holding door close enough which was probably the original cause. As se ... KitchenAid Architect? II S SERIES KUDS03FT Stainless Steel Built-in Dishwasher
My dishwasher makes a terrible grinding sound during most of the cycle. When it first starts up it does not, then after about five minutes it starts in. It it very loud and continuous. We have taken the screws out of the bottom and check to see if anything was caught in it. Nothing was there and it still grinds. The dishes are spotless, but the sound is terrible. Any suggestions? Thank you. Alice Henning
Check the wash pump maybe have a foreign object inside of it or check the pump motor for possible bearing problem. ... Estate Dishwashers
Hi, we have a Neff dishwasher and noticed a couple of days ago that it took hours longer than usual for the dishwasher to complete its cycle. Last night after the machine had been on for about 4 hours we checked and although there was some water at the bottom of the machine it had not started to wash the dishes although we had heard noises coming from the machine. On opening the integrated door notice that the "check water supply" indicator was lit up. Do you have any suggestions as to what
... Neff 24 in. S5443X2 Built-in Dishwasher
My amana soft and sound 1 dishwasher will not run through the cycles, it starts and the bottom fills with water, but then it turns its self off, any suggestions?
... Amana 24 in. ADB1500AW Built-in Dishwasher
I have a Whirlpool quietwash plus 940 series dishwasher that has stopped working. It left water standing in the bottom of it. When I push the button to start it, it makes clicking sounds and acts like it is going through the cycles but it's not working. Model number DU940QWDB3. Any suggestions on what might be wrong with it appreciated. Thanks!
Well, the manual I found online is not free, it will cost you $9.99. http://www.user-manuals.com/user-manual-WHIRLPOOL-DU940QWDB3.html ... Dishwashers
I have KitchenAid dishwasher model kudmoitjbso. The bottom sprayer works but the upper tray and top of unit sprayers do not. Any suggestion as to the problem and fix? Another problem is heating coil doesn't heat. If something needs to be replaced/repaired, can I do it? Where do i get parts reasonably priced?
... KitchenAid 24 in. KUDI01TJ - Multiple Color Built-in Dishwasher
I have a Maytag dishwasher #MDBF. It has started leaving small pieces baked onto the glasses and dishes. I have checked the output tube and it seems to be clear and I find nothing in the bottom strainers. can you suggest anything for me to look at?
Hi If the dishes are still dirty after the dishwasher has completed running, first check that you have the right wash cycle selected. This is because you may have selected a short cycle to save water and energy, but it is inappropriate for the load. ... Maytag MDB9600A Jetclean II Built-in Dishwasher
I have a Frigidaire Dishwasher (PLDB998AC1). The wash selector panel will light up correctly, but when you press start it doesn't turn on and within about 5 seconds the lights on the selector panel go out. In addition there is some water in the bottom that doesn't appear to be draining. Do you have any suggestions?
... Frigidaire PLDB998A Built-in Dishwasher
Leaving more water in than bottom than used to. I cleaned the silver cap on top of the sink (overflow or air)? Water comes out the cap which enters into the sink. Just a little bik. I recently replaced the old and my wife think started then. I install new host from dishwasher up to the plastic "Y" the silver cap sits on above the sink. Any suggestions Mdoel lokks like 665 but there i another number right below FH50022184
Hi, yes this Y and chrome cap is the air vent for the dish washer, If you have any water coming from this cap at all, you do have a blockage in one of the hoses. I'm not sure which one you replaced, but here is how the hoses work.From the dishwasher ... Kenmore Dishwashers
My 14 yr old Magic Chef Model DU4K seems to be leaking (it is dripping into the basement just under where the dishwasher is located). it started when the arm at the bottom of the dishwasher did not seem to be moving so my husband took off the bottom "grill" to see if maybe there was something under there preventing it from spinning. It started to leak when he put it all back together (the bottom arm is still not spinning)
Being 14 years old I dought if spares are still available for this machine personally at 14 I would rather replace the unit if you are not in a possition to replace it you could advise from your local appliance repairs as to weather parts are availab ... Dishwashers
I have a baumatic mini4 tabletop dishwasher and when i put it on to start a cycle after 2 mins water starts pouring out the bottom of the door and floods my kitchen? i have checked pipes and they are ok and when i switch the dishwasher off and back on again the water drains out the bottom of the dishwasher ok.
Hi,\015\012\015\012As there are a couple of troubleshooting for this leak. As with out doing it is not easy to understand whether its a plumbing issue or the washer is not draining constantly in cycles.\015\012\015\012 ... Baumatic 18 in. BFD46 Free-standing Dishwasher
I have a Kenmore Model 665.15955792 dishwasher. Water is leaking out the bottom of the door. I changed the door seal and the defusers but it continued. I took off the front of the door and I see the water filling into the base of the machine. When the dishwasher starts the cleam cycle, water is pushed up into the small square holes in the bottom of the door and then splashes up over the lip of the door and out onto the floor. It has never done this before, just started recently. I have had the d
... Kenmore Dishwashers
Frigidaire Dishwasher This is my second dishwasher in 18 months. Water leaks out the bottom of the dishwasher. It did it on my first one now it''s doing the same thing.Could it be the water pressure from the city water line? How could this happen to two dishwashers in a row? The leak starts immediately when the wash cycle starts.
This is a simple solution, the brass nut that connects the heating element to the base of the dishwasher is cracked and needs replaced. It takes just a few minutes to replace, just remove the nut after TURNING OFF THE POWER and take to your local par ... Dishwashers
Dishwasher is making a loud grinding noise when it's started. Doesn't matter the cycle choice; the cycle starts as normal then once started up starts making a sort of grinding noise as the water is pulsing, like something is stuck or blocking the "push" of water. I couldn't see anything stuck in the bottom - any thoughts before I call a repair person? I've never owned a dishwasher before - maybe there's a basic drain/blockage thing I should check out first? And, any recommendations for repair
... Maytag 24 in. MDBH970AW Built-in Dishwasher
Bubbles coming out of door on start My wife started the dishwasher and my daughter started screaming in about a minute. Bubbles were pouring out of the bottom of the dishwasher. We felt like we were in a Lucy Ball TV show. The soap had not even dispensed yet so I have no idea where it came from? Any ideas?
It came from some dishsoap (not dishwasher detergent) Simple solution is add 1 cap of fabric softener to the bottom of the dishwasher and restart ... Whirlpool GU1100XTLB / GU1100XTLQ / GU1100XTLT Built-in Dishwasher
AEG Favorit 350 dishwasher starts cycle okay but starts beeping about half way through and although dishes appear clean there is dirty water lying at bottom of dishwasher so not draining away and the drying cycle has not started.
... AEG 23 in. Favorit 88070IM Built-in Dishwasher
I have a 4 year old Maytag MDBH945AWW and the panel lights come on and I can select cycles... but the dishwasher wont start. I tried holding the start cancel button, tried turning the breaker off for a couple of hours, took the inner panel off the door and checked the latch, but its still wont start. Any other suggestions? If it needs a new control panel its probably better to just get a new similar dishwasher for $300, correct?
What you need to do is read for continuity and power across the door latch switch. (2 white wires) AND 2 Black wires Both wires must read continuty at the control panel connectors to the power source terminals for the unit to start. Since the co ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher
I have Whirlpool dishwasher DWH B00. Now it starts as normal filling water for a couple of minutes. Then it suddenly starts beeping and pumps out all the water and just contiunes to beep. This will happen in all programs. We have studied the users manual and cleansed the filters as suggested in the manual, but this doesn't help. There are now problems with the water supply. The dishwasher is not used very much, may be just twenty times. In the start it worked normally, this problem suddenly
Hello & Welcome to FixYa If the sound is coming from the bottom panel then it is the motor that has gone bad and needs replacement. However, if you hear the sound from the control then it can be due t ... Dishwashers
Dishwasher leaking Our dishwasher all of a sudden started leaking. I've taken the front panel off the door and can see exactly where. It's not a hole or anything...it's at the front, left edge of the basin, the bottom left corner at the front. It seems that right after it fills with water, it starts to leak once water is moving around inside and washing cycle starts. It is as if big waves are being pushed to the front left corner and over the lip of the basin. I don't think the water level is to
Just an idea...if i'm understanding you correctly,could the door seal be creased there or folded over by use and age to permit this to happen? cause you said nothing is missing ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher
We just installed a Fisher & Paykel DD603 dishwasher. Intially it would not drain correctly. And, proceeded to flood the bottom and set off the F1 error code. I dried out the bottom to get the F1 code to stop, which it did. After adjusting the leveling the dishwasher drained both drawers correctly, once. A few minutes after the rinse cycle had finished and the drawers were empty of water the F1 code started again. Now it will not go away unless I unplug the machine. I dried out the bottom very w
HI. The original code(f1) is in reference to a overfill condition. This may be a clogged drainage Assembly. This condition will usually cause the control sector to short out if not corr ... Dishwashers
The start button is flashing on the dishwasher and it wont start,i try changing the different cycles but it just wont start,the bottom of the dishwasher was full of water in which i drained it and took out some type of filter as i thought it may be causing a blockage which it wasnt as i still have the same problem....please help...my name is adam
What type of dishwasher do you own? Model, Brand?It could be a touch pad or control board issue. ... Whirlpool Dishwashers