Having problems with your Dishwashers ?

I have a modle GSD5130Dooww I can't find my manaul and I am have a leak it looks like it is coming from the mortor shaft that go's to a plastic housing can you help me


Answers :

Common problem the seal on pump leaks you have to rebuild pump or replace it sorry you need service
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a modle GSD5130Dooww I can't find my manaul and I am have a leak it looks like it is coming from the mortor shaft that go's to a plastic housing can you help me


Common problem the seal on pump leaks you have to rebuild pump or replace it sorry you need service ... Dishwashers

I have a KUDS02SR installed at my cottage and, after connecting it for the season, I noticed a bit of water shooting out the housing where the water enters the dishwashed. I removed and cleaned the plastic housing but it still happens. The cycle finishes normally and cleans the dishes but I'm not sure how to stop the splashback from the housing vents. Thanks for your help.


... KitchenAid 24 in. KUDS02SR Built-in Dishwasher

I have a GE potscrubber Dishwasher Model # GSD3630ZZ3WW it has been leaking from the bottom for about a week. I took the bottom off tonight and ran the dishwasher so that I could see where it is leaking from. It is not a hose but the leak seems to be coming from the back of the motor or pump fan where it goes into that plastic housing that attaches to the bottom of the dishwasher seems to be leaking in the very center of that housing where the motor shaft enters the housing. Water is just spray


... Dishwashers

I HAVE A DISHWASHER, KITCHENAID SUPERBA, I DON'T HAVE THE MODEL OR SERIAL NO#. THE ONLY NO#. I CAN FIND IS 8270140, THE DISHWASHER IS NOT RESPONDING TO ANY COMMANDS, THE RINSE LIGHT IS BLINKING AND THAT IT!!! I TRIED TO CANCEL BUT THE LIGHT COMES ON LIKE DASHES ON THE SGREEN THEN WHEN I HIT CANEL AGAIN IT GOES OUT, AND THE RINSE LIGHT JUST KEEPS BLINKING. HELP ME I THINK IT JUST NEEDS REST BUT I DONT KNOW HOW ? I CAN WITH THE HOUSE WHEN WE BOUGHT IT, HELP!!!! THANKS MARLA


I HAVE A DISHWASHER, KITCHENAID SUPERBA, I DON'T HAVE THE MODEL OR SERIAL NO#. THE ONLY NO#. I CAN FIND IS 8270140. The unit is not drying the dishes?\015\012 ... KitchenAid Dishwashers

Model SHU43C06UC a mouse eats a poliestirene circular piece like a float attached to the right of the bottom plastic base of the dishwasher under a grey plastic lever, now the DW runs but the cycle in the display doesn't make progress and it doesn't make any noise that indicates the water are running, help!, please advice!


Hi there sounds like your dw is in flood protection remove the poliestirene float compleatly and make sure the lever that sits on top of it is in the down position, hope this is of some help.\015\012\015\012pat no for new float is 165301 ... Bosch 24 in. SHU43 Built-in Dishwasher

Maytag Dishwasher-pdb2430awx-Leaking Leaking from bottom. Looks to be were the motor shaft enters plastic housing. Question: Can you buy just the housing not motor? Is there a bearing/bushing/gasket which may have worn out that can be replaced?


I believe that you must buy the plastic pump housing.....And that vinyl type shaft seal comes with that..I think!!!!\015\012I have the same problem.....I changed the regular seal kit at a cost of $30.00 CND....Which is like what? 100.00 America ... Dishwashers

My kenmore 16482 dishwasher was noisy and not cleaning very well. I removed the large motor underneath and found what looks like the plastic pieces that are on the electric motor shredded and worn and possibly some worn plastic in what im guessing is the pump housing. can these parts be serviced separate from the motor and where can i get them? thanks in advance


... Kenmore 24 in. 16482 / 16484 / 16489 Built-in Dishwasher

I have a GE black panel dishwasher. I am having trouble cleaning the panel. It looks like cleaner has dripped down it but no matter what I use it never looks any better. The panel sounds like hard plastic and is in perfectly good shape. It just looks bad. I've tried soap and water and other cleaners but nothing helps.


There is a cheap way to replace the panel and that is on applianceart.com. They have replacement panels and covers, and even stainless steel. ... GE GSD53 Dishwasher

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

Frigidaire Dishwasher Model # FDB1050REM2 is SOOO loud! We can hear it in all rooms of our large home. Sounds like it could shake the house...what IS that??? THANK YOU FOR YOUR HELP!


... Dishwashers

In replacing the float that senses water level on a Hobart AM 14 dishwasher, I see that the whole assembly is free to rotate after the c-clip is reinstalled. Past experience is that sometimes this plastic float will be found upside-down, on top of the probe which houses the reed switch & thermistor temperature sensor. What's to keep the float from rotating like this? Nothing appears to be broken or missing on the assembly from what I can see. THANKS!!!.......Lee


... Hobart AM14-253 Free-standing Dishwasher

Like so many others, I am experiencing a problem with my GE dishwasher's smartdispense. I have ALWAYS used the SAME detergent(Cascade Complete)and still have the gumming-up issue. I noticed that the dishes were not getting clean and when I opened the smartdispense cover I could see that the detergent was gelled. Spent the better part of 2 hours trying to remove as much gunk out of the dispenser as I could with the help of a plumbers flexible plastic drain cleaning tool. This really angers me as


I had the same problem as you also using Cascade Complete. It turned to a wet solid and completely cloged up. I have spent 3 days cleaning it and now have it working again. I had to spoon out what I could, but the purge method still would not wash ... Dishwashers

I have a Kenmore dishwasher Mod. #665 17729000. When I opened it there was a plastic tube laying on toip of the contents of the bottom basket: it looks like it could be the feed tube of water to the top basket, but I could find no way of reattaching it. I have not been able to find a detailed drawing of the machine on line. Help please.


W have herebelow the link of your model with all parts layout which we believe will helpyou see how everything is put together and also you can order any part thatmight need to be replaced. Don't thing we need to describe a ... Kenmore Dishwashers

In replacing the float that senses water level, I see that the whole assembly is free to rotate after the c-clip is reinstalled. Past experience is that sometimes this plastic float will be found upside-down, on top of the probe which houses the reed switch & thermistor temperature sensor. What's to keep the float from rotating like this? Nothing appears to be broken or missing on the assembly from what I can see. THANKS!!!.......Lee


You may have installed the stainless float retainer backwards. The hook on the retainer that holds the float faces the tank wall and fits into a flat on the probe. This prevents the rotation and will better secure the float. ... Hobart 42 in. AM14C-154 Free-standing Dishwasher

Dishwasher wasn't cleaning, tried cleaning the top spray arm but broke the hook that holds the top spray, looks like a 1/2inch gray plastic nut/bolt with a split prongs at the top. One prong broke so arm will not stay on. Where do i find this nut/bolt/hook. The LG customer service was of zero help.


Hi,\012That is not that hard to fix and you can easily buy the parts yourselfonline...Here is a tip that will help you with the online buying...How to Buy ... LG LDF6810 Built-in Dishwasher

Have moved into a house with a Bompani Antilla BO 02014 model dishwasher. There is a control knob on the right hand side with settings and it seems like it controls the time the dishwasher is on (similar to top load washing machines). I do not know which settings to use or what they mean. Can you help? Thanks Terry


... Dishwashers

Maytag My Maytag dishwasher is leaking from the bottom. It is a mdbh940aww. it was never used before. It was wrapped in the plastic wrap when I bought the house in 2005. Now the old one just went and I want to put this one in. It fit nicely, works great but leaks all over the floor. It is level and I check most of the parts. I put a mirror underneath and it looks like the rubber thing isnt looking too good. Do I replace this? If so how?


I also had a mdbh940aww that leaked from underneath. You need to check out where the water is leaking from. Unscrew and remove the bottom front panel so you can view under the dishwasher. Start up the dishwasher and using a flashlight see where th ... Dishwashers

GSD4000N Dishwasher not draining. I removed the sprayer arm, the round flat screen, the cage over the drain and the other plastic fixture that sits down in the drain area. I found a white ball sitting in there. I can also put fingers on something down there that is kind of like a wing nut that spins but doesn't seem to loosen anything. I'm officially stuck. Any help appreciated.


... GE 24 in. GSD4000J Built-in Dishwasher

The control panel on my Maytag MDBH970AW is unresponsive, and the latch is stuck in the "open" position (the plastic piece stays pushed in to the handle and won't come down). I've checked that the unit is getting power from the house. Last time I had this exact problem (when it was under warranty), they had to replace the control panel, the latch, and it seemed like most of the door. What should I do?


... Maytag 24 in. MDBH970AWS Built-in Dishwasher

PUMP DRIVE SHAFT IS LEAKING AT THE PLASTIC HOUSING


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\0126789searhg ... GE Nautilus 24" Built-in Dishwasher

My dishwasher is leaking out of the bottom, through a plastic part that looks like it used to have a plug, but is now missing. any help?


Question's & answer in yes or no for the reinforcement strategics used in organization to make their employees learn ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

I am renting a house with an old dishwasher in it. It powers up and sounds like the pump comes on but I need a manual to figure it out. I don't wantt to pull it out from under the counter without a manual or something. It is a Kenmore model # 587.1430590. Can you help me?


... Kenmore Dishwashers

I have pldb998ac frigidaire dishwasher. The rinse light stays on, and it won't start. Last night it was pretty loud while running the dishwasher, smelled a bit like plastic, and today only the rinse light. The heating element seems to turn on as well when the door is closed. Help - any ideas?


... Frigidaire PLDB998A Built-in Dishwasher

I just got my dishwasher in November and I am getting a white film and grime all over everything, especially the glasses and anything plastic (like the kids cups and plates). I use cascade complete and jet dry rinse aid (open almost all the way in the dispenser)... I am getting to the point I am afraid to drink out of the glasses and am washing them by hand! Please help!


Detergent companies have had to change their detergents to meet regulations causing dishwashers to not clean well. Go to the link below and you can see exactly what is going on and what you need to do to get better results. ... Whirlpool Dishwashers

Just replaced the white plastic in-setting of the top sprayer that was broke and while i tightened the "nut/screw" that keeps the spray arm up there it almost feels like it is too tight to turn freely. Should I oil it with something or is there some other reason that it is not as loose as i think it should be to turn (which it's not during the cycle)? thanks for any help.


... Champion 24 in. UH-150B Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0994 seconds