Having problems with your Dishwashers ?

Hello sir i have got hobart dishwasher it doesnt run but it rinse what shall i do it


Answers :

Possible that the program controller unit is faulty. The outputs to the motor must be checked during the wash cycle and if it is absent even after water has filled in then the controller unit can be faulty.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hello sir i have got hobart dishwasher it doesnt run but it rinse what shall i do it


Possible that the program controller unit is faulty. The outputs to the motor must be checked during the wash cycle and if it is absent even after water has filled in then the controller unit can be faulty. ... Dishwashers

Hello, I've got a Bosch dishwasher that is acting really funny. I've had it for 4 years. It's 630 SHE44C06UC model. It powers and I hear it run, but the cycle ends w/ 1 but it runs forever...and doesn't rinse or drain. Cancel drain works, but there are spots. I have rinse agent, it fills, drains, etc. I'm wondering if someone knows how I could reset it before calling a repair man? It doesn't seem to dry either? Any help? Thanks, Steph


Hello,Welcome to FixYa.Based on your description I'd say the issue is with the control...unfortunately.The number"1" being displayed ( on models with ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

Hello, we have a Fagor dishwasher mod.# FI-48 W, the problem we are having is that very little or no rinse solution is being applied during the rinse cycle. (the wash detergent is being introduced into the cycle sufficiently) There is plenty of rinse solution in the outside container, I can prime the rinse solution with the prime button & I can visibly see the solution lessen in the rinse container & I also turned the dial all the way up on the rinse dispenser. I took apart the rinse dispenser t


Hello ssn...\015\012\015\012\015\012Rinse agent in a dishwasher can thicken and clog the dispenser. Completely clean the interior of a used dishwasher to remove the old rinse agent and improve the performance of the appliance.\0 ... Fagor LFA-073 IT Dishwasher

Hello, I would appreciate if you have any suggestions regarding my GE dishwasher. It turns on and seems to want to work but the rinse cycle does not produce any water, it makes noises like the water is coming out and rinsing but when I open the dishwasher the dishes are not wet. I've checked the water valve, turned the control panel off and on, I'm wondering if it is just clogged, any suggestions? Thank you.


Hi,\012Here is a tip that will help you to find out why water will not come into thedishwasher... Dishwasher Trouble No Water entering Dishwasher ... Dishwashers

I have a Kitchenaid dishwasher Model KUD101lLWH6 - Serial number FR4205761. I have not changed soap or rinse product since I got the dishwasher but I am getting a white looking film throughout the dishwasher. My dishes seem to have the same film. Should I be cleaning it (dishwasher) with something? Thanks, Rosalie Buhnerkempe


The white film that you are talking about could be two things. First is the quality of your water, having sediments either through the water system or from the water heater because the water that goes into the dishwasher is taken from the hot water ... KitchenAid Dishwashers

Portable Dishwasher Hello, We just got a used Haier portable dishwasher, model HDP18PA and while the hose connnects fine to the sink, the water isn't going into the dishwasher and is coming out of the connection. Does that make sense? It looks like, if it operates properly, the water should be sucked into the dishwasher but the connector isn't pulling the water in. Help! Thank you! Tara


You have to have a good seal. Get a hose washer from your local hardware store and replace both of them on the hose if they are like a garden hose. If you still don't get any water to the unit, post again and I'll step you through it. ... Dishwashers

Hello I have a Quiet Power 3 dishwasher that is leaving food residue on my dishes. The dishwasher is 2.5 years old and all of a sudden this problem is happening. I have not changed dishwasher soap. It seem like there might not be enough water filling into the dishwasher and not rinsing the dishes well enough.


If you live in a area with hard water, there may be a large buildup of hard water/soap scum in the bottom water reservoir where the pump, filter, and other working parts are. This is located inside the tub, not underneath. This scum/crystalliz ... GE Dishwashers

My Hobart dishwasher is backwashing quick rinse. My quick rinse is filled with water can you help? M:LXIH S:23-1072-227


... Hobart 24 in. LXIH-3 Built-in Dishwasher

Good morning, I have 01 Hobart dishwasher AM14, i need to be replace rinse sensor probe and temperature sensor for booster heater.But I can't to find Hobart part number Please help me.Thank you.


294692 for the rinse probe.\015\012"temperature sensor for booster heater"? Do you mean the thermostat? If so, part number is 274161.\015\012\015\012Parts breakdowns and part numbers are available at ... Hobart AM14C-155 Dishwasher

I 've got ADP 5550 dishwasher ,rinse only light is stuck flashing and I can't change programs or start dishwasher


Hi,This problem can be fixed by pressing heated dry, normal, heated dry, normal keys\015\012within 6 seconds. There should be a technical sheet attached to the toe\015\012panel at the bottom front of the machine. If pro ... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

How does the Rinse Aid part of the FDB2000RFS1 dishwasher work? We got one donated to our non-profit organization and found all our dishes are coming out with a dry film all over them. I believe we have hard water in our office, and no water softener. We are wondering if the Rinse Aid would help this? We have no instructions, however, so are unsure as to how to use this???


If you have hard water, use Lemi Shine. It's the only thing that works. It is a detergent additive that completely removes hard water spots and film from your dishwasher. You can get it from your local grocery store. ... Dishwashers

My dishwasher worked just fine yesterday afternoon. I loaded the dishwasher again after dinner and tried to start it, but I got no response from the buttons on the left side of the panel. The buttons on the right side (hi temp scrub, sani rinse, and air dry) light but don't do anything. I also get no response from the delay hours, start, or cancel buttons. Help?


... Kenmore 24 in. 16939 Built-in Dishwasher

I am an electrician, and have been called to repair a faulty Hobart comercial dishwasher. I didn't note the model number, but it is the same shape as the one pictured. The problem is that nothing happens when the lid is closed, like it has a faulty switch or sensor. When I got to site, the dishwasher had been drained, and would not automatically refill. I filled it with a bucket, it heated the water to the correct temp, but still nothing happens when the top is closed, and I have to have it


Hello Pat. Here is the link to the hobart line of kitchen equipment. It has all of their manuals as free downloads. If you have a laptop and internet access you can get the correct manual once you know the model number. Based upon what you said t ... Hobart AM15-5 Dishwasher

Hello. I was given a dishwasher, whirlpool ADP 755. I've had it about a year and finally got it plumbed in yesterday, so excited! Not having ever had a dishwasher before, i'm uncertain what to do and i cant find a manual online. I tried putting some cups in it and running it on all the different settings on the dial but each time the cups are still dirty. The machine is steamy so looks like hot water is passing through, but its clicking through all the programs very quickly and leaving stuff dir


... Dishwashers

I am working with a Hobart C44A diswasher with a 15KW water basin heater and a Hobart bosster heater. What is the minimum water temperature I can supply to the dishwasher and maintain 160 rinse temperature required?


Hi,140F min water entering temp.http://www.instawares.com/Prod_PDF/HOB-C44A263.pdfheatman101 ... Hobart AM14-253 Free-standing Dishwasher

Hey guys, I am a dishwasher repair guy in barbados, the caribbean. I am having problems with a Hobart LX30H. the relay board is doing half the things right and the othrs not at all. I replaced it with a new one and the same results. At startup, the wash sump heater and wash motor are running, but the fill valve, drain valve and rinse booster are not running. Hence the startup operation is stalled. the funny thing is that the rinse booster and fill valve led's on the relay board light up at


Not sure what sort of problems (fault codes etc) you were having before you chose to go on the path of replacing the relay board.\015\012\015\012It might help to know what fault codes you have been noticing.\015\012\015\012One ... Dishwashers

Hello - On my KitchenAide model nbr: kuds01flss0 Dishwasher the the cancel light blinks constantly and only the rinse light will come on. Also it won't start even when the rinse light comes on.


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Ive got a jackson model jl100b dishwasher that is not rinsing properly. it seems that not enough water is coming out to effectively rinse the dishes.


If not enough water is coming out of arms, there could be build-up in the arms or the tubing to the arms. Check that the filter is not clogged as well. ... Jackson 25 in. TempStar 328 Free-standing Dishwasher

Smeg Dishwasher Hello I have a smeg dishwasher - built in, push button. It has stopped working - the program start and you hear it drain but that's as far as it gets, no water appears to be getting in. A couple of times the last 2 program buttons flash or the rinse light is on when we open it. let me know if you have any thoughts on this - I'd really appreciate it. thanks Diane


Replace the timer/control board ... Dishwashers

Hello. My dishwasher has been pretty perfect for four years. When my house water softener ran out of salt, I added rinse aid and salt to the dishwasher for the first time. I subsequently added salt to the softener. Recently [a few weeks later] the glasses have all come out cloudy, something that never happened before. Also, the cutlery has whitish marks on it which are impossible to remove. I would love some help on this. Many thanks, Terry


Try cleaning the machine by adding white vinegar to the wash water (before the water-fill procedure finishes). Put your stained dishes and cutlery in with the wash to remove the hard water deposits. The combination of salt and rinse aid may have help ... Dishwashers

KENMORE MODEL # 363.16222100 Hello - my dishwasher (model# above) is currently filled with H20 and will not drain/work. When the knob to select the dishwasher cycle to begin is turned, it just 'clicks' and does not engage the washing cycle. When I tried to just let it run the cycle as is to 'restart', it had an electrical odor to it., Currently the knob is at the 'Rinse & Hold-(Heated Dry Off)' part of the cycle and all dishes have been removed. I would appreciate any assistance available. Thank


Either the motor is locked up or the control failed. You will need a service visit. If it is over 10 years old, I would buy new. ... Dishwashers

Is it possible to extend the rinse cycle on a hobart am14 dishwasher it only rinses for about 10 sec.


No the rinse time is non-adjustable it is built into the main control board ... Hobart 41 in. AM14-255 Free-standing Dishwasher

We've got Beko DE 2542 FW Slimline dishwasher. Everything switches on as it is supposed to but nothing happens. Rinse aid and Salt indicator red light is not on, because we've filled them up. Switched on dishwasher, green light for "On" comes on. Selected programme level, pressed start. Green light comes on for "Wash" Nothing happens - we've left it overnight but nothing happens. What seems to be the problem? Look forward to hearing the solution.


... Beko DE2541FW 18 in. Portable Dishwasher

Hobart low rinse pressure - Hobart Lx30h Commercial Dishwasher


... Hobart Lx30h Commercial Dishwasher

Hobart am14c no rinse - Hobart 42 in. AM14C-154 Free-standing Dishwasher


... Hobart 42 in. AM14C-154 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2353 seconds