Having problems with your Dishwashers ?

Dishwasher wont drain, its a 2005 fridgadaire, drain line appears to be fine???


Answers :

You may need to take the drain pump off and look to see if there is anything like broken glass or other object stopping the impellar wheel.
\015\012
\015\012you can use a wet dry shop vac to remove any water left in the machine.If you do not find any thing in there you may need to replace the drain pump
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher wont drain, its a 2005 fridgadaire, drain line appears to be fine???


You may need to take the drain pump off and look to see if there is anything like broken glass or other object stopping the impellar wheel.\015\012\015\012you can use a wet dry shop vac to remove any water left in the machine.If you do no ... Dishwashers

Ge profile dishwasher not draining Model no. pdw9280n20ss I checked the drain line at the garbage disposal. No blockage. Line is clear. The back flow loop is high and not kinked. Only a small trickle of water comes out of the disposal drain at the end of cycle. No forceful pressure of water like before. I removed the smaller grill drain area and cannot feel any objects down in there. I do not know how to remove the larger fine mesh grill on bottom. Any suggestions?


Did you ever figure out how to remove that large mesh bit? I am stuck at the same spot and would love a hint. ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

We have a Kenmore Elite 665.13862 dishwasher that does not drain. It appears to go through all the intermediat cycles and washes the dishes fine, but the water doesn't drain. We've tried to clear out the drain as best we can. It doesn't appear to be clogged.


It appears your pump has failed in this instance.For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.I recommend both sites because ... ... Kenmore 13869 / 13864 / 13862 Dishwasher

I have a 3 year old delonghi dishwasher and have followed all the suggestions for error E4 on this ste and the water still wont drain from the machine and the error re appears. i have drained out all


... Dishwashers

Water wont drain out of bottom of tub. The dishwasher works fine, it just wont drain the dirty water out. If I restart it to wash again, the dishes are washed in the dirty water.


Hi, A clog in the drain line or air gap (if there is one) is the usual reason that a dishwasher won't drain. Often the problem is at the point where the drain line attaches to the garbage disposer or househ ... GE Nautilus 24" Built-in Dishwasher

Wont drain!!! my Bosch SRS45E02 / SRS45E08 Exxcel Slim-Line Free-Standing Dishwasher wont drain help!!


Check first the drain lines and the drain pump.If the drain pump is working, and there is no problem in there, then the problem is usually because the water level switch activated by the floating sensor is stuck.You probably n ... Bosch 18 in. SRS45E02 / SRS45E08 Exxcel Slim-Line Free-standing Dishwasher

My dishwasher skips the final drain cycle. The lines are all clean and there is no clog. It drains just fine in the beginning of the wash cycle. Every time I do a load of dishes I have to run the full cycle, then leave the machine open for 3-4 hours and start the cycle again and listen for the drain at the beginning of the wash to drain the machine from the initial wash and stop the machine after it is done draining so it won't fill up again. Sometimes we have to unplug it and wait about an hour


... GE Nautilus 24" Built-in Dishwasher

Water seems to be leaking into the dishwasher at the end of the cycle the water appears to be clean, so I am wondering about a seal of some kind on the hot water line leaking or whatever. It is a Bosch Dishwasher SHU series 3200 My problem is the same. Water leaks in to bottom of dishwasher over about a 2-3 day period. The dishwasher runs fine. It does not ever run over. The water seems to stop entering the dishwasher after it reaches a certain level.


You have a bad water valve. When the unit is off, the valve should seal and the water should not flow. Something has gotten in the valve and is keeping the needle up or the diaphram in the valve has deteriorated. replace the water valve and you wil ... Dishwashers

My Whirlpool dishwasher will wash fine, but when it drains, it's a slow trickle. I've snaked the line from the sink to the washer, but I can't find a clog. If I try to blow into the drain pipe all I accomplish is almost passing out. I can't blow all the way through it. When I hit the drain button, I hear the solenoid kick on with a rattle, then just a hum. Like I said, I just get a trickle, and the basin never drains completely. It's driving me crazy! Help? Thanks.


In the bottom of the dishwasher, there is a screen. Remove it and clean it and the drain underneath it. Make sure the POWER IS OFF before you start. ... Dishwashers

My Whirlpool dishwasher will wash fine, but when it drains, it's a slow trickle. I've snaked the line from the sink to the washer, but I can't find a clog. If I try to blow into the drain pipe all I accomplish is almost passing out. I can't blow all the way through it. When I hit the drain button, I hear the solenoid kick on with a rattle, then just a hum. Like I said, I just get a trickle, and the basin never drains completely. It's driving me crazy! Help? Thanks.


Ok, don't fret too bad, help maybe just reading.Disconnect the drain hose from the sink/garbage disposal, get a big bucket, stick hose in bucket, making sure that end of drain hose does not get lower then the bottom of dishwasher. Turn di ... Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

Dishwasher will not drain. It appears to us that the pump simply is not pushing the water out. We have disconnected the hoses and then the water drains, but there is nothing clogged up. The garbage disposal works fine. We can hear the pump when we push drain but nothing happens.


Hello. I suspect that the dishwasher drain pump has a chunk of debris in it or that the hose is clogged or kinked. Do this. Get a #2 phillips head screwdriver and remove the lower front panel on the dishwasher. Once that panel is off you will see ... Whirlpool Dishwashers

I HAVE A 8 YEAR OLD KENMORE ELITE (WHIRLPOOL) DISHWASHER . THE THERMAL FUSE BLEW AND I REPLACED IT AND THE MAIN CIRCUIT BOARD. NOW THE UNIT APPEARS STUCK IN CANCEL 2 MINUTE CANCEL/ DRAIN/MODE AND THE RELAY CLICKS ON AND OFF TO THE DRAIN MOTOR. I HAVE BENCH TESTED THE DRAIN MOTOR AND IT WORKS FINE WHEN IPT 120VOLTS DIRECT TO IT ANY SUGGESTIONS . WHAT AMPERAGE SHOUD DRAIN MOTOR DRAW?


Hi\015\012\015\012\015\012The drain motor is of 120 V, 50-60Hz and 0.6 amp rating. Dishwasher not draining issue usually occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visibl ... Whirlpool Dishwashers

MY TECHNIKA DISHWASHER WONT DRAIN THE WATER SO IT STOPS HALFWAY IN THE CYCLE. THIS HAPPENED BEFORE AND THE TECHNICIAN MAUALLY DRAINED IT BY PRESSING A SERIES OF BUTTONS AND IT WORKED FINE. WHERE CAN i FIND OUT WHAT BUTTONS TO PRESS TO DRAIN IT MYSELF. THANKS


... Dishwashers

My Kenmore dishwasher model number 665-16389300 is starting to fill up and not drain during the normal wash cycle. Water will run out on the floor. When we hit cancel and drain it appears to drain just fine so I dont know if it is a pump issue or something in the cycle. What do you think?


... Kenmore Dishwashers

My dishwasher will not drain. When I try to run it through the drain cycle by hitting drain/cancel button it makes one click and nothing happens. I checked for blockages in the drain line and valve but the motor just wont start.


Check to determine if the pump out motor is functional by checking if supply voltage is across the 2 terminals in pump out mode with a AC voltage meter. If voltage is present and motor does not spin this is an indication that the motor is open circui ... Dishwashers

Kenmore dishwasher wont drain , but pump runs fine


... Whirlpool GU1100XTLB / GU1100XTLQ / GU1100XTLT Built-in Dishwasher

Water wont drain out of dishwasher. yes I check the lines and pushed the drain button.


Shut the power off at breaker, let sit for 30 minutes plug back in if it works then you may have lucked out and the main board just went stupid. If it doesnt work chances are the main board took a dump and must be replaced ... Kenmore Dishwashers

Water will not drain/pump out of machine. All other functions seem to work fine, but water does not drain out. Problem is not in drain line. The bottom of dishwasher is clean. I wet vacuumed it clean twice


Check for clogged pipe,drain pump or timer. ... Whirlpool 24 in. DP840D Free-standing Dishwasher

I have a Whirlpool Dp840SWP Free Standing dishwasher and all of a sudden it wont drain??? What could this be??? What should I check? Is there a filter on the drain line?


... Whirlpool 24 in. DP840SWP Free-standing Dishwasher

Hotpoint dishwasher BFI620 not drained and won't now work: Moved into a new house and acquired a built in dishwasher. First load was fine - or so I thought. Washed and rinsed ok, but large amount of water left in the bottom of the machine which means it now won't work. I've taken out the filter and it appears to be clear, also checked the hose for any kinks, but now I'm stuck. Any ideas?


... Dishwashers

Older Hotpoint dishwasher runs fine up to draining then wont drain..just hummmmmss


You have a blockage in your drain pipe or in the motor it self ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have a Vikin Dishwasher Model DFUD042 and the arms are not circulating water. When we start a cycle it drains previous water then fills it up after that it runs thought its regular cycle but the arms are not circulating water we have tried cleaning drain checked lines etc. still wont work.


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher

Put a new disposal in and didnt take the plug out. The dishwasher would fill up, and not drain. Took the plug out, and replaced the line, and now the dishwasher wont fill up with water. HELP!!!


... Maytag 24 in. DWD1500A Built-in Dishwasher

Hi I have a GE Dishwasher model gsd2200g -03 and I am getting C1 & C2 error codes but it seems to be working fine. I disconnected the drain hose and the water appears to be draining properly


Hello there: if you have installed a new garbage disposal make sure the knock out has been removed if removed then check the drain valve in the pump hope this helps you out sincerely D.Jones ... GE Profile PDW9880NSS Stainless Steel Dishwasher

When starting wash cycle the dishwasher cda cw447 doesnt appear to be getting enough water in and is making a droning / whirring / electrical ? noise. pipes all connected ok inc aquastop water supply unit, no kinks etc. machine 3 1/2 yrs old, just started making this noise. appears to complete rapid cycle but still making unusual sound. water drains away fine from this cycle, dont believe pipes / hoses are blocked.


Try removing the inlet pipe, and refitting, might fix it, else likely that the \015\012Inlet water soleniod failing/failed or tiny mesh filter (it does come out for cleaning) behind the inlet hose clogged. Temporaily bypass the aquastop water s ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2344 seconds