Having problems with your Dishwashers ?

Kitchen aid dishwasher has squeaky door when opened & closed. I understand there is a pulley system that causes the problem noise. how do you get access to the pulley


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kitchen aid dishwasher has squeaky door when opened & closed. I understand there is a pulley system that causes the problem noise. how do you get access to the pulley


... Dishwashers

A GE triton dishwasher causes hammer noise when stops filling. The sink faucet works fine as do all the other faucets in the house. I cleaned all of the traps in the dishwasher. Because the sink works, I don't think it is a sink valve problem. I turned off the water to the house and drained the system, the air chambers should be good. Is there some component of the dishwasher that could be causing the noise? Would cleaning the pump help? If so, how would I do that?


The cause of the hammering noise, (slamming) is due to the water inlet valve on the Dishwasher (DW) shutting off abrutly once the DW reaches the proper amount of water.\015\012\015\012If this is an older DW, you might want to replace the ... GE Dishwashers

Dishwasher not draining. Filled with soap. It was working fine two days ago. My sink is fine I do not understand what the problem is. I did get a new garburator could that have caused the problem?


Did u remove plug in disposal drain port? ... Kenmore Dishwashers

I'm having problems with the drain pump constantly running. I understand so far that it'll be the anti-flood device that is causing this. I've taken the dishwasher out and tipped it backwards to drain as much water out as possible but nothing comes out from anywhere ! It appears to be a sealed unit so how do I get to the appropriate part and fix it ? Cheers !


... Neff 24 in. S5453X1 Built-in Dishwasher

How does this system work? I paid $19.99 to live chat a problem and the link went down. I tried to get back on line but the system would not let me. i have now paid for a full monthly membership and the system wants to charge me again for a live chat. I have emailed the company and i had an automated email saying someone would get back to me but it could take up to 48 hours. I am feeling a bit like this is a con... what am i supposed to do now?


Hi,\012You can view the solutions posted to your problem by going to your "My Profile" page. Direct link: http://www.fixya.com/users/kazziebingAlso, you can contact FixYa Premium support by clicking this link:http://www.fixya. ... Dishwashers

WE HAVE A 3 YEAR OLD BOSCH DISHWASHER WHICH NOW HAS PRESENTED US WITH A PROBLEM. DURING A WASH CYCLE IT APPEARED TO MAKE SLIGHT NOISE WHEN WE DECIDED TO INTRRUPT THE CYCLE BY OPENING THE DOOR AND CHECK THE CAUSE OF THE PROBLEM. WE NOTICED THE WATER IN THE APPLIANCE HAD NOT DRAINED. WE PROCEEDED TO CHECK THE FILTER WHICH SEEM TO BE FREE OF ANY REMANANTS OF FOOD AND ANY OBJECTS. THEN WE FOLLOWED WITH THE CHECK ON THE PUMP FOR SAME AND FOUND NOTHING THAT WOULD CAUSE A BLOCKAGE. WE DECIDED TO R


... Bosch Dishwashers

Dishwasher FGHD2471KBO What could cause this whinning noise. We have replaced the draining mechanism and has not cured the problem, Could you please tell us what other moving parts could cause this problem


... Frigidaire Dishwashers

I have a Bosch SMU2046UC/14 dishwasher that makes some noise but will not start the wash cycle. I found that the noise was from the timer motor by removing the front of the door. The timer continues to run and but only advances until half way through the wash cycle where it stops permanently. Is this a problem with the timer or could something else be causing this problem.


HI. The timer motor mechanism regulates the length of time power is to be routed to each component. If the timer motor does not advance properly, it can result in a wide range of problems. Common symptoms will usually include sticking in a cycle(fail ... Bosch 24 in. SMU40 Built-in Dishwasher

I'm having a problem with my Miele dishwasher G 879 SCVi I asked for assistance on 2/12/10 and paid $6.00. I have yet to get a response. Please let me know when I will as I need the problem addressed before Christmas Day. The problem again is that all the lights on the diswasher panel are all flashing at the same time when switched on. It may need to be reset somehow, as the power went off, which may have caused the problem. Your urgent assistance is required. Thank you


... Dishwashers

The door has always made a horrible noise that I could not get to go away (I shot some WD40 into all available places). I learned to live with the noise. NOW, the spring on the door has obviously broken. I am afraid someone will open the dishwasher and hurt a small child with the falling door! I see where you addressed the broken spring problem. Do you think I could fix the horrible noise at the same time? Do you think this is something my husband could fix?


... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

Hi, my hotpoint aquarius df61 makes all the noises of washing, i hear the water going in, motor is running, however i dont believe the spray arms are revolving, so the dishes are not getting clean. i have cleaned the individual holes in the spray arms, but i don't think the water is getting up the back pipe and into the top spray arm. it does not spin at all. no problems draining. help please. and were can i get a copy of the user guide, free preferably. thanks


How old is your machine? it is posible to have something in the watwr pump, you hear the water and the motor, but the fan of the pump (washing pump) is blocket. also the pipes hat make connection to the water pump and the arms. at someoane i found gl ... Dishwashers

I have a whirlpool adp 8540. It started having this loud clicking noise while running and the noise is progressively getting worse. The noise sounds as though it is coming from the bottom of the machine. Can you advise what might be the cause? Thanks


... Whirlpool Dishwashers

... calling Master_Tech Bosch Dishwasher SHU43C07UC


Hello Mary, I checked on your dishwasher and what you have is a pressure fill dishwasher. This unit has a pressure switch to make sure the water level is correct. When the dishwasher is full of water (the indention that is around 2 inches in from the ... Bosch 24 in. SHU43 Built-in Dishwasher

My glassware almost seems like it has breadcrumbs stuck to it. I have run several empty cycles but the problem persists. Is there a filter I am supposed to be cleaning or something? I can see in the leftover puddled water on the recessed exterior glass bottoms what almost looks like sand particles or breadcrumbs, although I know it's not. I had the same problem at my last house with a different brand of dishwasher. How do I get rid of this if it doesn't flush out the system, even on an empty cyc


The problem may be the hot water supply. if you run out of hot water quickly in your house, this may be related. you will need to flush out the water heater once or twice. good luck ... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

Eurotech Model EDW254EWXX runs a 13 minutes cycle before washing like usual, but now it is getting stuck and not doing anything during that 13 minute cycle. No water is running, and it makes NO noise at all. We are not getting any errors displayed. I have unplugged it, and shut off the circuit breaker for 20 minutes, but the problem is still there.


... EuroTech 23 in. EDW254E Built-in Dishwasher

Ref: NEFF Dishwasher S5555XOGB/70 (FD No. 8602) Problem: Does not drain at end of wash cycle. Checks/Symptoms: 1. No blockage in whole of drainage system, system and filters are clean. 2. Pump does operate mid wash cycle ? drainage tube can be felt pulsing and pipe gets warm right through to the main drain connection at the ?U? bend. 3. At end of wash cycle the pump appears to still be trying to run but there is no flow, even when the door is opened. If machine is emptied by hand the pum


... Dishwashers

Makes rumbling noise during wash cycle. I've pulled the pump and found no debris. It's been making this noise for about a year now. No problems with our dishes getting washed. Do you think the bearings inside the motor may be bad? If so, would I need to replace the motor and pump assembly?


... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher

MATSUI DISHWASHER MS160SL. IT STICKS HALFWAY THROUGH THE WASH PROGRAMME. IT IS NOT GETTING HOT. DONT KNOW IF ONE PROBLEM IS CAUSING THE OTHER IE IF THE ELEMENT NOT HEATING IS CAUSING THE PROGRAMME NOT TO MOVE ON.


I have the same problem and have found that it is caused by as you suspected a burned out heater element. they can be purchased on the web for £15.95 at partmaster .co.uk ... Dishwashers

A drainage problem caused the dishwasher to shut off water inlet. Now the problem is sorted out, how to let the dishwasher get water in again? Thanks, Nahida


... Baumatic 18 in. BHD45 Slim-Line Built-in Dishwasher

Screw drop Hi I was installing my new LG dishwasher and I droped a screw in the hole in the side panel where you can put a screw to connect to the side of your cabinet. There is a small plastic cover which I removed where you can screw a screw into the cabinet. However the head of my screw was too small and fell in the side panel. I can not get the screw out or see it now although I know it is in the dishwasher. Is there anyway of getting it out or will this cause a problem? Since it is in t


A great retrieving tool for this is a flexible shaft magnet wand. I strongly recommend this tool be placed in everyone's toolbox.\015\012\015\012as far as leaving it there if not found? probably safe from electrical. will years of vibration allow it ... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

I just bought a used Kenmore standalone dishwasher and ran it for the first time. The dishes on the top did not get clean and the soap did not come out of the closed soup dish. at one point I took a shower and was wondering if that might have influenced the water pressure enough to cause the problem. Is the soap supposed to open during the wash and could the poor water pressure prevent the top shelf from getting properly washed?


The inlet filter is probably clogged. Try letting it fill up. Open the door to stop it right after it starts to wash Pour a gallon or two of hot water in and see it it works better Stop and do this everytime it goes to fill up. If the door opens ... Dishwashers

I have an older (appx 20 yrs old)GE model 2200 dishwasher and recently started getting a C5 error. I understand the water input valve may be plugged. I don't have the owners manual. Where can I get one to locate the valve and strainer so I can trouble shoot this problem


Go to marcone.com, enter your model # and it will give you a full breakdown of the unit ... GE Nautilus 24" Built-in Dishwasher

My KitchenAid Kudd230bwho started rattling today. We have not had any problem up until now. I took the cover off the front and the noise is consistent with the motor. When the motor runs the noise can be heard. I checked the drain inside visually and did not see any cause or obstruction. What do I do next? Any suggestions?


... KitchenAid Dishwashers

After 3 years it just started making a loud noise, I am no expert but it sounds like a fan in a motor. I have only heard it today, but I am betting it will still happen next load too. I didn't change any of the settings, have been running the same way forever. When I did hear this noise I started pushing buttons to see if I could get it to stop, no good, no change. The cycle has completed and everything looks ok, waiting on the dishes to dry. Drainage has never been a problem for me either.


I would say this is a build up of lime.try changing your tablets and checking your salt levels.there is no fan .try what i say and see what happens.have you found a glass broken it could be as simple as that but i dont think its serious.adrian,,,, ... GE Nautilus 24" Built-in Dishwasher

Miele dishwasher makes grinding noise when turned on, there is a light on front next to inlet/drain. So I poured some boiling water into the dishwasher and then left it turned on and could feel the boiling water coming out of the drain hose so I am assuming it is an inlet problem, as it will drain but will not fill or otherwise work.There are a few small cracks in the outer hose of he inlet hose just below the grey box thing, could that be enough to cause the problem? They are only small so I di


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1382 seconds