Having problems with your Dishwashers ?

My dishwasher's top rotating sprayer keeps coming loose. The screw and plastic bearing fall out and I think that it has stripped out the end where it seats into the top of the washer. Any ideas on how to anchor this in? Adhesive? A larger screw? The plastic bearing is Part No. 568 and the screw is Part No. 569. If I replace the conduit arm (Part No. 585), will that give it a new, clean spot to screw in too? How difficult is it to replace this arm?


Answers :


\012

Hi,
\012


That is not that hard to fix and you can easily buy the parts yourself online...

Here is a tip that will help you with the online buying...

How to Buy
Appliance Parts Online

heatman101

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher's top rotating sprayer keeps coming loose. The screw and plastic bearing fall out and I think that it has stripped out the end where it seats into the top of the washer. Any ideas on how to anchor this in? Adhesive? A larger screw? The plastic bearing is Part No. 568 and the screw is Part No. 569. If I replace the conduit arm (Part No. 585), will that give it a new, clean spot to screw in too? How difficult is it to replace this arm?


\012Hi,\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you with the online buying...How to Buy ... Dishwashers

How do i put the lower spray arm back together? I had to replace the top screw part and it seems to stand up to high. I have a small white plastic ring, a larger white split ring and the arm itself. I have tried every configuration to put this back together but it is not right - the new "screw" part number is the same as the original.


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

The top spray arm of my Frigidare model FBD4315LFC0 Aqua Surge dishwasher fell off. Their appears to be a missing part. I've been searching online for a schematic and can't find one thorough enough to use. The parts I have are: 1. The top sprayer arm (the one in the top of the tub) 2. The two piece plastic keeper ring that appears to fit into the top of the spray arm. 3. A small white grommet looking item that fit inside the keeper nut. 4. The keeper nut that screws directly onto the wate


Hello there:hey sorry i keep getting disconnected i will be back on really soon i need to find out what is going on i hope these things that i have discussed with you is helping you out the parts are not as hard as they look once yo ... Frigidaire 24 in. FDB435RFR Built-in Dishwasher

I have a KitchenAid but model # KUDI24SEWH1. Can not find it on your list although another model without the last letters 'WH1' is on it. Anyway, my nephew ordered the parts he said needed to be replaced. One was the top water feed tube and bearing which he had no problem replacing when the part came in. But, he is having a very difficult time opening up the front door to replace the soap dispenser. Removed the 6 screw (three on each side) and the two at the top of the door but that is as far


You don't Use the WH2 just the first 6 letters and numbers.\015\012Jim ... KitchenAid KUDI24SE Built-in Dishwasher

Maytag Dishwasher Model #MDB7600AWB One of four plastic WHEELs mounted by screws to a 10 inch metal bar located on either side of the top rack has broken where the wheel meets the screw shaft. (These wheels run along the guide tracks for the upper rack mounted on the inside of dishwasher.) Please provide me with a part number so I can order a replacement part. Thank you.


Call Maytag with information of the tag on machine ... Maytag Dishwashers

Hey Everyone! Ok try this one! I have been working on a KUDS25 Kitchenaid Dishwasher. It was leaking like a siv from the bottom. I replaced both top and bottom plastic bearings and also tightend all the screws at the bottom. Leak Gone, I thought. It now has small leaks down both sides. I have since been told by the owner that he took the door apart himself. I pulled out the dishwasher from the cabinet and ran it. I could see the leaks at the top on both sides of the door latch. I cou


Hello davidgalb. You can install a new gasket to seal the door again. That old seal is not flexible any more. That said, for my time and money I recommend a replacement dishwasher, this one has definitely seen better days. Joe ... Dishwashers

The spray arm, above the top rack, keeps unscrewing during the wash cycle. Just the arm comes off leaving a round plastic part attached to the top. This can be unscrewed and inside is a white 'washer'. The arm can be clipped back but comes off again in the next wash. The plastic 'washer' has to be turned over to allow re-attachment. Is a washer missing from inside?


Could the arm be mounted upside down and rotating the wrong way? Just an idea... Some of these can fit either way and the retainer will fit either side of the arm. ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

I have a LDF9810ST that I'm trying to replace a broken drain line. The old part number is AEM39700301 and the new part number is AEM69493803. The new part is made with a plastic u-shape plastic piece with a black hose that comes off the top of the u-shape plastic. Where does the black hose go?


Hey Glenn. Did you ever figure it out? I am about to replace my mother's hose since it cracked and I am looking at the service manual -but am I little stumped. I don't have the dishwasher in front of me with the part so I can't explore the options. ... LG LDF9810ST Built-in Dishwasher

I have a hotpoint HDA2000G00WW built in dishwasher. The dishwasher does not run unless you press the plastic door under the latch area. I have adjusted the latch and that does not resolve the problem. I notice that the top three screws that hold the plastic eschucion are no longer holding as the plastic screw areas have broken on the eschucion. Do I need to replace the eschucion or can it be tightened some other way?


... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

Remove the lower wash arm (1) by turning the nut (4) clockwise (right) lift the arm off, there is a bearing (3) (small thin plastic washer) under the arm, be sure not to loose it. Lift the tab on the back of the feed tube cap (2) and swing it to the right and lift up, this may need a bit of pressure to release it This is for my Whirlpool dishwasher DU1100XTP. I'm putting it back together and can't remember if the plastic washer goes on top or underneath the feed tube cap. Also how do I remo


This is not a tuff job plastic washer goes on top . and torx screws . you use a proper torx tip for the screw size . ( you can go to sears parts .com and put in model # and see a good break down of the wash arm s and t ... Dishwashers

I bought the Kenmore 665.110729521 about 5 yrs ago. Yesterday the two plastic pieces which attache to the top rack and slot into a plastic piece on the tub wall, broke and the whole top rack fell down/dropped. Anyone know what these parts are called and if one can purchase replacements for them and if so where? Appreciate any help.


... Kenmore Dishwashers

I have a McCULLOCH 1500 psi pressure washer and it seems like I need the top part of therod where the waer comes out it no longer adjusts the water stream seems like a little plastic defkector that you adjust your stream with, snapped and broke looks like I HAVE TO REPLACE THE ENTIRE TOP PART OF THE 2 PIECE ROD on the bar it says the following max130barmax60C PA66-GF30 Where could I purchase this piece Andy Nowostawsky my adress is 15447-rue d'esterel Pierrefonds,Quebec H9H 1Y9


... McCulloch Pressure Washers

The water does not rinse the top tier dishes. The plastic rotating water sprayer that sets under the top tray is full of particles. Is there a replacement part we can get since it is nearly impossible to clean out this sealed water dispenser part? Thank you. Dave


Http://www.appliancespartsdirect.com/ariston/11389-spray-arm.html\015\012\015\012\015\012Here's the part, but I also thought of something; what kind of particles are in there? if it's soap, or grime , something soluble, you could just take off ... Dishwashers

I have a frig/electrolux gallery series dishwasher: model GLD2445RFC0 serial # TH72896159. On the ceiling of the dishwasher is a gray plastic arm that snap onto a round gray disc that screws into the ceiling. It will not stay connected to the disc eventhough I snap it on with a round white plastic doughnut kind of cap. I have replaced the gray arm in the past because the orig. one fell and melted on the heat ring. This one has : 1546496 1546079 CAV 2 >PP+20TF written


If you go to searspartsdirect.com and type in 154607802 for the part #, I'm pretty sure that's what you are looking for. I broke the exact same part and it's what my husband ordered as a replacement. ... Electrolux Dishwashers

Hi, I am looking to find replacement parts for the top rack glider wheel and screw on the right side of my dishwasher. Model # mdbh970awq. I have found parts break down web sites but none seem to have the part I need. Thanks for the help.


... Maytag 24 in. MDBH970AW Built-in Dishwasher

My asko 1776 dishwasher seems to be missing the ball bearing assembly for the top rack. my home was rented for a couple years and it is possible that it broke and the tenants just threw out the pieces. i did find one ball bearing on the floor of the unit. if I order the replacment parts, can i install this easily by myself?


Hello, welcome to fixyaIt's not too complicated, you'll be fine. Here's what works for me, move the rack stops to the left if you haven't already and then the ra ... Asko Dishwashers

A part fell into my top tray,gray,plastic,9 inches long w/ a 2 inch diameter circle in the center,looks like its an arm,spinning somewhere?....did it fall from the inside "top",side,bottom??? Don,t know where to attach back?What is it,where does it go,can it just snap back ???? Thanks for any help...MODEL FGHD 2433 KFO...Serial # TH928998505....[email protected]


Here is the exploded diagrams of your entire machine.\012Locate the patr and you should be able to figure out where it goes\012\012 ... Frigidaire FGHD2433KF Builtin Dishwasher

I am trying to clear the drain on my ge portable dishwasher. I have removed the 2 screws for the drain cover but my dishwasher has another part on top attached to the spray arm that is holding my cover on . I can not figure out how to remove this part. the model # is gsc5511pooww


... GE Dishwashers

I am wanting to get a replacement roller assembly(plastic unit with 4 rollers) that clips on to the side of the top load drawer. I'm able to replace it easily if I can find out where to get the part.


HI. There seems to be an issue concerning the model number that is post above your question. The number is question is EDW194E. This is unfortunately not showing up as a current or viable model number. This may be because your unit has been discon ... EuroTech 24 in. EDW194E Built-in Dishwasher

I need to take apart the inside of my whirlpool dishwasher and can't get the mesh filter part under the spinning arms off it has a plastic part with a metal screw in the middle.


... Dishwashers

Component failure Actually a Kuppersbusch IGV 645.2 Dishwasher There is a plastic conduit which takes water from the base of the machine to the upper spray arm. This now comes adrift from its connection at the base (behind the lower spray arm) on every cycle, resulting in poor or incomplete washing. It can be replaced easily and seems firmly inserted when done but is always adrift again by the end of the next cycle. Anyone any ideas?


Put a bead of silicone on the tube connection and let it set up good before running. If the tube is in good shape and only comes loose this should be an easy fix. ... Whirlpool GU2400XTP Built-in Dishwasher

Need to replace the latch assembly on Maytag dishwasher model # MDB5600AWW. How do I gain access to the area where I need to replace the part? I removed the 5 screws at the top, but can't seem to get the upper front panel off. I'm afraid of pulling on it to hard.


Remove all the screws on the inner door panel and lift it up it will be easyer ... Dishwashers

Miele dishwasher G2870 scm. There is an F14 fault. I have cleaned the arms removed the waste basket from the bottom of the dishwasher and removed the two parts one with the large metal ball to expose the plastic wheel clog. There does not appear to be a blockage. I also removed the top arm and cleaned that out. I don't know what other inlets to check as the guide does not tell me exactly what an F14 fault is but explains F11,12,13. Can you help?


F14 on your model of dishwasher is indicating a blockage, poor water\015\012pressure or could be a fault with the pump pressure level switch or\015\012circulation pump.Filter and non return valve is cleaned of any blockages and if the fau ... Dishwashers

Part of the top spray arm has broken off (#3378144) of my ultrawash kenmore 665. Where can I find that part to replace it?


... Kenmore 24 in. 17032 Built-in Dishwasher

Maytag dishwasher MDBTT50AWS Door Latch broken. Screws hold the top. The bottom appears to fit into ''plastic teeth'' . Are the teeth supposed to have top and bottom or just bottom teeth. It appears mine has broken teeth on bottom. Is so, do I need to replace control panel to hold latch at bottom.


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0822 seconds