Having problems with your Dishwashers ?
The plastic recessed door handle on our Smeg Model PL823X Type 11053 has suddenly cracked and broken away with normal handling which makes it difficult to open the door. We are told we need a a complete new program selector panel, that is very expensive and we are informed we may as well but a new machine. Is that true and is that good design?
Purchased about 2006/7
Repair Help & Product Troubleshooting for Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The plastic recessed door handle on our Smeg Model PL823X Type 11053 has suddenly cracked and broken away with normal handling which makes it difficult to open the door. We are told we need a a complete new program selector panel, that is very expensive and we are informed we may as well but a new machine. Is that true and is that good design? Purchased about 2006/7
I need a new door, and a new front panel. Where in
There is an easier way - www.applianceart.com has standard panels and a ton of options including colors and stainless steel. ... Danby DDW496W Free-Standing Dishwasher
How does one change the colour panels on the front of the dishwasher. Need to change panels to white with new appliances. I was informed many years ago when we purchased dishwasher that panels could be reversed to new colour.
On any dishwasher, the bottom rail can be pulled off and the panel bends and pulls right off. ... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher
I have a 4 year old Maytag MDBH945AWW and the panel lights come on and I can select cycles... but the dishwasher wont start. I tried holding the start cancel button, tried turning the breaker off for a couple of hours, took the inner panel off the door and checked the latch, but its still wont start. Any other suggestions? If it needs a new control panel its probably better to just get a new similar dishwasher for $300, correct?
What you need to do is read for continuity and power across the door latch switch. (2 white wires) AND 2 Black wires Both wires must read continuty at the control panel connectors to the power source terminals for the unit to start. Since the co ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher
Have a whirlpool gold dishwasher.The problem is that the clean lite on the control panel flashes not allowing the unit to work.I installed a new disposal and forgot to remove the plug for the dishwasher drain hose.When the flood happened I opened the door in order to stop the dishwasher.Now the unit will not work.The lite flashes 7 time ,then it pauses and flashes 7 times etc.Is there a reset procedure to run in order to get the unit to work or do I need to buy a new control panel?
HI,Can you please give the make and the model no. so that i can give you the manual.Waiting for your reply ... Dishwashers
I need a new front panel and door seal for a customers dishwasher. It is a fisher and paykel Nautilas The opperating instructions say it is a model 920 . I can not read the model No from inside door as it has been cleaned off the sticker. The panel is black and has the led display on the right hand side
Check out www.applianceart.com ... GE 25 in. Nautilus GSC3400J Free-standing Dishwasher
I need the diagram for the door pulley system so I can make sure I am hooking it up right. The original door chord/pulley assembly broke. I ordered new parts, Now I want to make sure I am putting it back together the right way. The edge of the screw- on floor panel is pushing the plastic hook off of the door hook when you shut the dishwasher door.
... KitchenAid Dishwashers
Cycle interupted until pressure applied to door, near control panel. Fault is intermittent. Sometimes I need to lean a chair against it to keep it going. Door clicks shut nicely and does not leak. Cycle always starts but often will not complete without a thump. Is pressure inside bowing the door and activating a safety switch?
Problem on the safety switch\015\0121)try to adjust the safety switch to contact properly with the door.\015\0122)any screw is there on switch means loosen the screw &adjust to contact with door. ... Bosch 24 in. SGS43C02 Classixx Built-in Dishwasher
EDW5500DSS wont completely drain water Okay so now that my dishwasher runs, when it finishes a cycle it has a nice puddle of water at the bottom that never drains completely out. I am assuming its a relay or something because I looked for a floating switch (did not find), I can hear a pump sound as if it wants to pump the remaining water out, but, it doesn't. I really want to solve this problem soon so I can order the new door seal and needed part together. Checked the line out and of course i
The srainer over the pump could be clogged not letting the water drain quick enough. Be sure the screen is cleane out. I believe you would have already checked and cleaned this. I believe it is the impeller on the pump that pumps the water that is ei ... Dishwashers
When the cyle is complete the dishes are cold and wet and greasy ones not washed properly. I think it needs a new heater but the person who came out to look at it said it was because it is in my garage (?). I have always had my dishwasher in the garage and never had this problem. If it is the heater, is it an expensive repair or would I be better off buying new. I have a six year old Zanussi de6754
At http://www.usersmanualguide.com/zanussi/dishwasher/de6754\015\012you wil find the user manual, if the dish washer is instaled proper it ... Dishwashers
Our Smeg Diswasher, model STA 9452 18" built in is not advancing past the wash cycle. Water does not pump out for rince cycle. I can stop the cycle by opening the door, cancelling the program and restarting on the rince only program. Do we need a new timer?
... Smeg Dishwashers
Programer needs manualy turning to complete wash cycle. Do I need a new timer module?
Yesgo to sears parts direct .com and order part and look at the image of all your part in your unit . you can order the part and they will ship it direct to you. ... Dishwashers
I have a Lady Kenmore(model 665-1596581) that needs replacing. Is there a current DW model that will accept the wood panels from the Lady Kenmore? Where can I find the dimensions of the current cabinet door kit for the DU 1055 XTS to see if the old oak panels will fit the new dishwasher.
... Whirlpool DU1055XTS Built-in Dishwasher
We have a new Bosch freestanding dishwasher model SMS50E62EU. We cannot open the door after the cycle is complete. We have tried to alter the position of various parts of the program but to no avail. Why won't the door open?
... Bosch 24 in. SHE43C05UC Stainless Steel Free-Standing Dishwasher
E6 I have been getting E6 error message over and over again. I have had the machine to pieces, cleaned out the pump and hoses, and still the same problem. Occasionally, the error message changes to E8 or E1, but no matter what, I can't get it to work. Any ideas? When I start the machine, select any program and close the door after a short while the machine does not complete the wash cycle and I get the following message either: E1 or E2 will appear in the control panel Any suggestions Dave M
I had this problem and fixed it tonight. When selecting a program water pumps into the machine, but with no drain i ended up with too much water and error code E6.\015\012\015\012I traced the fault to a broken wire between the electronic ... Smeg DWI614 Built-in Dishwasher
GE dishwasher model gsd1200 g06. Need black panel insert for door and bottom foot panel.GE site has these but the cost is as much as buying a new dishwasher ($150) for both. These are just colored plastic or vinyl. The measurements are 23.5''by 19.125'' and the other is 23.5'' by 3.75''. Are these available anywhere? John Shuler [email protected]
... GE Dishwashers
I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?
If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher
Need to find a new door control panel for whirlpool adp530 18 ins dishwasher control dial fixing broken.dail loose
... Whirlpool 18 in. ADP530 Free-standing Dishwasher
SMEG STX dishwasher does not complete the wash cycle, stopping after 3 minutes on all cycles displaying error code E1. The machine seems to start with the usual whirring noise but then stops after 3 minutes without pumping in water. The machine is a few years old now but has needed 2 new control panels already although this does not appear to be the problem this time. Any suggestions? Thanks DW
Hobart LXIH won't complete delime cycle. Enters delime mode and executes the delime cycle properly until about a minute or so into the rinse phase. Machine shuts off abruptly with E5 code mostly, sometimes E4 code. Changed the control board, didn't solve the problem. The LXIH runs the normal wash/rinse cycle every time without any problems. This is a nearly new machine that actually don't need delimed, planning on selling it and it must work perfectly. I know some would program the delime notifi
... Hobart 24 in. LXIH-3 Built-in Dishwasher
My soap dispenser door is broken, and the spring is gone. I've ordered a new dispenser assembly. How do I install it? I'm guessing I need to remove the front panel, but am unsure of how to do it.
... Miele 24 in. Incognito G843Vi Built-in Dishwasher
KitchenAid KUDC25CH Dishwasher Just installed a new control board, last week after some lengthy emails we decided it was probably the control board , control board in now in, as far as I know the dishwasher cycles thru all three of the small lite rinse buttons ad it may have finished completely, there wasno water in the bottom of the washer so all was pumped out and the dishs were dry......the large rinse button on the panel is blinking. I open and close the door but the light contiues to blink
The system does not allow me to view what other consultants have suggested to you about the problem with your dishwasher.\015\012\015\012Before you try anything else, get a Finish dishwasher cleaner kit from the supermarket and run the di ... Dishwashers
Need new door panel for dishwasher FDB836FB7 - Frigidaire 24 in. FDB836GF Built-in Dishwasher
Not sure if you need the whole door or just the panel. CHeck out www.applianceart.com if it is just the panel. They have a ton of options. ... Frigidaire 24 in. FDB836GF Built-in Dishwasher
Need new dishwasher replacement door panel in white model numberGSE3600G00BB Nautilus
You should also look at www.applianceart.com. They have a ton of replacement panel options for the front of the dishwasher to change the appearance. Black white, stainless, but also picutres, designs, and lots of options. ... GE Nautilus 24" Built-in Dishwasher
Powdered soap residue (cascade) sticks in the dispenser after dishwasher has completed wash cycle. I have tried the new gel pacs and they also seem to stick to the dispenser even after the the dispenser door has opened. What needs to be done?
The best solution is to use the compressed powder cubes, the will fall to the bottom of the dishwasher as soon as the soap cup opens. New dishwashers use so little water that they dont do a good job of getting all the phosphate free detergent out of ... GE Dishwashers