Having problems with your Dishwashers ?

Chef Electronic Dishwasher User Manual. Model A8955WW


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Chef Electronic Dishwasher User Manual. Model A8955WW


... Dishwashers

Looks like program in electronic dishwasher has locked into a cycle. the machine will not drain even after resetting it. Also it will not restart any program or cycle after resetting and recycling power. The machine is a classic electronic bosch dishwasher It has worked perfectly for three months


Im a old bosch tech . the problem is the module or the drain pump is stuck. if this helps please give me a 4 thumbs up post thanks. ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

My dishwasher is leaving soap residue on the dishes. I'm the second user of this dishwasher and it looks like the previous users have clogged the rinse-aid dispenser. It will only hold about a table spoon of Rinse aid. Is that normal or is there a way I can de-clog the rinse aid so I can have soap free dishes?


Try cleaning the rinse aid with hot water. Clean all the orifices. Or you can try the two in one soap tablets. ... Kenmore (15132) Built-in Dishwasher

Kenmore 665.1646 dishwasher. A nearby lighting strike killed some electronic devices in our house. We have electricty to our dishwasher but the console will not light at all. The fuse, latch switch and overfill switch all check out good. We replaced the electronic control, 8539379, and still have no lights. What else could it be?


Hi.If you have tested fuse, overfill, latch, and you have a new electronic control, then it is necessarily a wiring problem. However, since wiring problem causing this after lighting is quite uncommon, I suggest double checking all the re ... Dishwashers

Whirlpool dishwasher This dishwasher quit in the middle of a wash cycle,we had to empty it and wash by hand. I thought that maybe the breaker to the dishwasher popped but when checked it had not .I then noticed that there are no lights on the electronic key board .Even when not in use there should be one red LED that is lit. It almost seems as if there is no power to the dishwasher. Is there some type of backup safety switch or breaker on the dishwasher itself that I could reset?


Fuse on control board. ... Dishwashers

My dishwasher if a Fridgedare Gallery dishwasher appros 6 yrs old with an electronic front...just ran the dishwasher..everything fine and now all the lights are flashing and i can't reset and the dishwasher won't turn on. Can u help


Hello. I would turn the dishwasher off at your electrical panel and leave it off for five minutes. THen turn the power back on and it may reset everything\015\012\015\012lem me know as I have additioinal ideas if this doesnt work ... Dishwashers

Hi there I purchased a Simpson Riviera 966 Dishwasher about 10 years ago and was very happy with it. All of a sudden water was flooding the kitchen from somewhere under the dishwasher, and not having the money to repair it at the time, it has just been sitting, and possibly the seals may need replacing. All electronic funtions seem OK on it however. Would it be possible to give me a quote on repairing the dishwasher - I HATE washing up !!!! My name is Hartley Cowderoy, and I Live at 65 Rosemount


... Dishwashers

LG Dishwasher My LG Dishwasher Model: LD 14AW2 Electronic stand alone keeps on coming up with an error E1? I am not sure what it is because we have no instruction manual. The dishwasher is about 2 1/2 years old. I am doing a standard (Normal) wash. It starts to put the water in side then comes up with the error.


I have same dishwasher first check the water is cumming in if not remove the left side cover.1) the bottom tray is full of water you have a leak . replace the leaking part . 2) you will see a foam float toward the back of ma ... Dishwashers

I have a bd 1681 60cm electronic dishwasher, set dishwasher to rapid setting, dishwasher starts water and then drains again code e1 will then come onto display. could you source problem please


... Baumatic Dishwashers

I just bought an Indesit D3000WZ dishwasher, second hand, and it does not have a user guide or installation manual and I can't find one online. I just want to know how to properly install and operate my dishwasher (i.e. what settings to use, etc.) I have never owned a dishwasher, so this is all new to me.


... Indesit Dishwashers

I have a Frigidaire 1500 series with fully electronic control dishwasher. When I try to start it all the lights come on the display but not water enters the dishwasher. I have tried various settings including delay start but still the same outcome. The over-fill protector in the bottom of the dishwasher moves freely. What else should I try?


... Frigidaire Dishwashers

Leaky Dishwasher I recently moved into a new house that has a brand new Magic Chef dishwasher. We haven't even had a chance to use it, but last night discovered water leaking from the bottom onto the floor. When I opened the door, there was about 3-4 inches of water inside. I baled as much of the (slimey) water out as I could, and that stopped the leak. Now afraid to run the dishwasher for fear that it might leak even worse. E71195 Type 777-0


... Magic Chef 24 in. DC4000 Free-standing Dishwasher

We have just moved into this unit fitted with a MIDEA WQP12 - 9011B dishwasher with NO MANUAL. What can we do ? We have been using the dishwasher by turning the operating KNOB to a position and pushing in the POWER KNOB. The machine then goes through a cycle of 80 to 100 minutes but without an USER OPERATING MANUAL, we have no idea of whether the dishwasher is being operated correctly.


... Dishwashers

I have a kitchenaid dishwasher model KUDS01FKSS0 which is not running. For the past 2-3 months it occasionally stopped mid cycle with water still at the bottom of dishwasher but eventually resumed working. Now it just doesn't run any more and there is water presently in the dishwasher tub). The user interface part (keypad) seems to be working. I can press the keys and the corresponding LED would light up. However after I close the door, nothing happens. There is also no noise what so ever. Any i


THE MOTOR SHOULD MAKE NOISE IF ON, CHECK THE MOTOR OR TIMER. ... KitchenAid KUDS01FKSS Dishwasher

Problem for Kenmore 24 in. 15992 Built-in Dishwasher Previously answered by Ginko but have not had any responses since June 18 and problem not solved. No water flow into dishwasher. Actual model is Kenmore Elite undercounter dishwasher 665.15982990. Float is not stuck. Worked fine for 10 years until mid May. Display shows cycle is on and counting, for all the different cycles. No valve or motor sound when starting cycles, only a single electronic click. When cycle is canceled, motor does s


Hi.Sorry about your old query.If there is no power on black wire and no filling, then check and eventually replace the thermal fuse. The thermal fuse is attached to control board. If it is faulty it will read continuity, norma ... Kenmore 24 in. 15992 Built-in Dishwasher

E3 Error Hi My dishwasher is showing error E3, which the user manual states "The appliance is not able to pump out the water.", however, other E3 error states a heating issue. The dishwasher does in fact heat the water but generates the E3 error after 10 minutes or so, then pumps out the water from the dishwasher. I'm a little confused as to what the issue is here and what part I would need to rectify the problem. Any advise you could give would be greatly appreciated. Kind regards


The E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model nu ... Smeg Dishwashers

I have a kitchenaid dishwasher model KUDS01FKSS0 which is not running. For the past 2-3 months it occasionally stopped mid cycle with water still at the bottom of dishwasher but eventually resumed working. Now it just doesn't run any more(and there is no water presently in the dishwasher tub). The user interface part (keypad) seems to be working. I can press the keys and the corresponding LED would light up. However after I close the door, nothing happens. There is also no noise what so ever. A


... KitchenAid KUDS01FKSS Dishwasher

Bendix DWN 38 L Dishwasher: User manual required


... Dishwashers

Kenmore portable dishwasher 665.1784 faulty Electronic Control


Hi do you get any fault codes? ... Kenmore Dishwashers

Electronic controls the dishwasher will not turn on. press and hold the heated dry button for 5 seconds and the machine came back to normal. now even that is not getting the machine back to normal. the normal button and start buttons flash but machine does not function. i have the front electronic panel off and do have a volt meter to test if you could run me thru the proper procedures.


First thing to check is the door latch switches, and hte strike plate(metal tab protruding from the top of tub assy in which the door closes into, if bent up to high the door will not be recognizedas being closed. you can use a small screw driver nad ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Bosch Dishwasher The lower drawer of my dishwasher does not drain when I use it...I have checked the small drain basket and it is not clogged....I have just sold my home and I am concerned for the next owner. How long is the warranty on these appliances....it came with my unit 2 years ago and I have been the only user. Would it still be under warranty? Thank You Paul


Most appliances have a one year parts and labor warranty some are varied or graduated. You can find out in the warranty section of your owners manual or the website of the brand of dishwasher you have you can find user guide /owners manuel there. It ... Bosch 24 in. SHU43 Built-in Dishwasher

We have an LG dishwasher LD14AT1 P/No 3850ED3005R. It kept signalling an error to do with a leak- all hoses etc were checked, one relaced but no fault was found, so we had a repair man come out and he repalced the electronic board at a cost of $200.00. The error still kept signalling (by the dinging sound). It was then discovered that the appliance had rusted and there was in fact a leak in the base of the machine, not a fault in the electronics. The machine has just remained idle since. I belie


I agree that it should not leak like it is dowing. Is it really rusted/corroded? Or is there a whole?The tech should have seen the leak with ease. Replacing the PCB was uncalled for.Regarding the leak, I would gather the pr ... LG Dishwashers

I have a Frigidaire dishwasher (FDB2810LDC1) and a Er code appears in the display with the sensing, rinsing agent low, sanitized, and clean lights all flashing as is the child lock light. After seeing the Er code, I opened the dishwasher and thought I heard the detergent tray open but most of the detergent was gone with a little remaining. This has happened before and we have had the electronic panel replaced twice. Could it be something else like something blocking the detergent tray from op


... Frigidaire Dishwashers

Seems my drain is plugged on my dishwasher it is the magic chef 4500b unit and i now have water all over my kitchen floor. i cant seem to find the product du4500b  so i entered the du2000 , either way there is water on my floor and about 4 inches of water in the bottom of the dishwasher


Ok there are several problems this can be caused from...1. there is usually a float device (I'm not sure about this model) that floats up and turns the water flow off when an appropriate amount of water is injected into the DW...sometimes these ... Magic Chef 24 in. DU2000 Built-in Dishwasher

User Manual Can I get a user manual for the Equator 20 in. CD 400 Compact Dishwasher?


You can find an owners manual at:\015\012\015\012http://www.appliancedesk.com/appliancedesk/Owners/CD400OM.pdf ... Equator 20 in. CD 400 Compact Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1537 seconds