Having problems with your Dishwashers ?

GE Potscrubber 1200h tempertature sensor The push buttons will not set (work) except for the Reset button...it goes in a cycle in about 30 seconds. Normal wash, etc will not set. They go a little over half way in but do not connect. When it first started we had to reset the GFI breaker.


Answers :

Hi
\015\012\015\012

The issue seems to be with the control not working fine, it\015\012can also be due a bad control board. You can take it apart and check the\015\012control board, blow air with hair dryer on the control if bad replace it. Hope\015\012this helps...
\015\012\015\012

Daniel

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

GE Potscrubber 1200h tempertature sensor The push buttons will not set (work) except for the Reset button...it goes in a cycle in about 30 seconds. Normal wash, etc will not set. They go a little over half way in but do not connect. When it first started we had to reset the GFI breaker.


Hi\015\012\015\012The issue seems to be with the control not working fine, it\015\012can also be due a bad control board. You can take it apart and check the\015\012control board, blow air with hair dryer on the control if bad replace it. ... Dishwashers

I have a Kenwood Slimline Dishwasher KS474s for a year and it has always worked near perfectly. rn However, over the last couple of weeks the dishwasher has not been running the cycles properly (stopping half way through etc, starting the the delay timer half way through cycle), but it always sorted itself after being turned off and starting again. The trouble is now it has got worse.. when I turn it on the panel and lights on the front just flash, the delay sometimes scrolls through on it'


... Kenwood Dishwashers

My built in dishwasher ser no sm843049B-Model number GSD696ON1OSS will not reset. I mistakenly used the delay wash setting. It is set at 1 hr. I have used the start/reset button several times and the delay continues to show 1 hr. I don't see that the timer is moving in any way. It seems to be "stuck" at 1 hr . Is there a way of "erasing" the previous input? D Bafkas


Hi,\015\012\015\012Try to do a hard reset by unpluging all the cords for 1hour and then plug it back.\015\012\015\012Goodluck,\015\012Please don't forget to rate the solution ... Dishwashers

I own 2 model KUDS01FLSS1 KitchenAid Superba Dishwashers. The first unit had the clean light blinking so I read the post below and reset it. I thought everything was fine but half way during the cyc


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Dishwasher runs for appx 14 min & stops washing half way thru wash cycle. Timer contunies to run. No drain pump out (nothing). Let dishwasher set idle for appx 1 hour and it will re-set. Set timer forward to end of wash cycle and it will complete rinse and final rinse. Then go to dry. Timer works ok.


This sounds like something is stuck in the drain pump. You can remove the inner cover to look for obstructions. You have a dual purpose motor it does the both circulating and draining. The blockage is causing it to overheat and trip the thermal prote ... Whirlpool DU840CWD Dishwasher

How do you reset the kenmore elite dishwasher? I replaced the faucet in my sink and forgot to turn on the water to the dishwasher....when I started it it went half way through the cycle when I realized there was no water. How do I reset it so that it will start at the beginning of a cycle?


Turn off the breaker that powers it. If all else fails, take a jug, fill it in the sink and pour it into the bottom of the dishwashwer until it comes to the bottom of the heater, that's the round think suspended above the bottom, below the rack, and ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I have an older GE dishwasher, model GSD1200T02. I recently put in the wrong soap, so I had to press the clear/reset button. When I did this, the dishwasher ignored me and seemed to continue through the cycles anyway. When it got half way between "drying" and "off", it stopped, and has been that way for several days now. It will not respond to any button pushes at all now. I cannot even reset it because it does not respond at all when I press the clear/reset button. I have had a load of di


This is only a long shot, try turning the breaker off and on again, may be ???\015\012 Jacques. ... Dishwashers

Dishwasher does not seem to have power. I have a Kitchen Aid, under counter unit, 9 years old, model KUDS01I. I used it 2 nights ago with no problem. When I push a button, nothing happens, no lights show, etc. It is plugged into the lower half of a duplex socket with disposal plugged into the top. Disposal works, so the problem seems to be with the dishwasher. That also eliminates any issues related to breakers or ground fault indicators, etc. Is there a reset button on the dishwasher? Is there


... KitchenAid Dishwashers

Hi I have a whirlpool diswasher which is about 7 uears old which has blown the fuse (and the mains trip) half way through a cycle. Replaceing the fuse has resulted not resulted in the restoring of power to the unit. Is there anything simple I could check (in line fuses etc.)? Cheers


Some whirlpool models do have a thermal fuse in the consloe mounted to the main control board housing, might looke to see if it has one and if it is good ... Dishwashers

I brought this model second hand when i first switched it on it seemed to work fine then it stopped half way through the program and now has a unreadable desplay on the front panel and wont do anything i've tried resetting it but still know luck?


... Siemens 24 in. SE25A266 ExtraKlasse Free-standing Dishwasher

How do I fix my Kitchenaid kuds301x. It stopped half way through the cycle and now the whole panel won't light up or work. I used to be able to reset the breaker and it would work for a while now it is totally dead.


... KitchenAid Dishwashers

My Whirlpool DP1040XTXQ portable dishwasher will not turn on. I've checked the plug, outlet, breaker, etc... I know there is a way to reset the keypad by holding down a couple of buttons at the same time, but I cant remember the right combination or how I learned it in the first place. It's not in the user's manual.


... Whirlpool DP1040XTX Portable Dishwasher

We have a neff dishwasher and the pump is draining all the time (even when the door is open) but there is no water in the dishwasher. Is there a way to stop the pump and reset the setting for the flood overflow


Hi there, our neff S54T09 doesn't seem to want to fill with water, it starts to fill for about 5 seconds then stops, then stops & starts filling for about 10 seconds then stops completely & nothing happens!! Have checked the water inlet & ... Neff 24 in. S5409X0 Built-in Dishwasher

Cookworks wqp8-9239 slimline dishwasher. Start the cycle on setting 1-4 and half to three quarters of the way through it stops and starts beeping with the first 3 buttons of the control panel flashing. The manual says when lights begin to glimmer the machine is out of order? can i ficks this without sending for repair man?


... Dishwashers

LG dishwasher. Stopped working mid cycle. Model LD~1204W1. Able to turn on and off. Able to press all other settings so can change wash temp, half load, full load etc. but cannot start programme. When press start makes a double beeping sound and nothing happens. Help as live in hot country and water is going to smell bad pretty quick. Thank you.


... LG Dishwashers

I have a HDW 201 WH dishwasher. the three lights on the end are flashing and beeping seems to be stuck half way through the cycle. checked water, filters etc. is there an easy fix?


... Haier Dishwashers

On my whirlpool ADP962 dishwasher the start light is flashing but nothing is working. I can change the programme type (ie rinse, wash etc) but the programme will not start. I can't select either half load or a time delay. By holding the start button it will start the pump but when this stops it goes back to a flashing start light. The programme progress lights are not lit. What is this telling me and how can I reset it?


... Whirlpool Dishwashers

I set my dishwasher to pots and pans to run a dishwasher cleaner, and now when I push the auto button, the time reads 2hrs. instead of the 93 mins. it always read before. How do I reset the auto button to the way it came?


... Maytag MDB7100AWB Dishwasher

Our Ikea Nutid Whirlpool dishwasher locked up recently. It started when someone was wiping off the top of the door where the control buttons are located. The dishwasher was locked on the china setting. Holding the cancel button, shutting off the breaker did not seem to clear it. Is there a way to reset the dishwasher? There was flashing on buttons but I cannot remember how many flashes or what one was flashing.


... Whirlpool GU2400XTP Built-in Dishwasher

Idl 705 Hi our indesit IDL 705 stops half way thought a wash with the red salt light on(despite salt being full), can reset it and get it away but not ideal any ideas? Thanks


I have the same problem, what was the problem and how did you resolve it? ... Indesit 24 in. IDL700 Built-In Dishwasher

Kitchen Aid KUDS01DJSS0 dishwasher is stuck in light china mode, can not change mode to normal, heavy, etc... Also can not enable energy saver or sani clean. Is there a way to reset the dishwasher of diagnos the bad part?


... KitchenAid Dishwashers

We have a Hotpoint DWF31 dishwasher which seems to have a fault in the programmer. On 'Normal (65) and Economy (50)' the minutes to end comes up as '2H' and although I have set it running on both programmes, it doesn't appear to be counting down or performing the normal cycle. On the other programmes it works normally. According to the User instruction book, the programmer is self learning and calculates the minutes to end based on previous use of that programme. Is there any way of resetting th


Hi\015\012\015\012 \015\012\015\012Thanks for using FixYa. Switch off the\015\012dishwasher from the power socket and mains and replace all the cables and\015\012switch it on after five minutes. Yo ... Hotpoint 24 in. DWF32P Free-standing Dishwasher

My GE Potscrubber 640 isn't draining. The bottom of the tub is completely full. I know there is supposed to be a little water but this is way too much. How can I access the drain? Which setting drains any water in the tub? Is there a site I can go to, to see videos of this type of repair?


... Dishwashers

Frigidaire Dishwasher (GLD2250rdc6) has all lights light up through cycle and stops half way through


... Dishwashers

Hi my whirlpool dishwasher (adp 6830) stopped mid cycle,no error code showing, will not reset with a long press to the start button (have prevoiusly been able to reset this way in response to f8 fault


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0943 seconds