Having problems with your Dishwashers ?

Do you need to connect both hot and cold hoses for the fisher and paykel soft touch dishwasher 918TD. Can you buy extention hoses from hardware stores if original not long enough?


Answers :

The dishwasher depends on both water connections like your clothes washer
\012Yes you can find longer/ extension hoses at hardware or Home Depot/Lowes
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Do you need to connect both hot and cold hoses for the fisher and paykel soft touch dishwasher 918TD. Can you buy extention hoses from hardware stores if original not long enough?


The dishwasher depends on both water connections like your clothes washer\012Yes you can find longer/ extension hoses at hardware or Home Depot/Lowes ... Dishwashers

I am trying to install a KitchenAid KUDS301XBL & the hose that came w/it is not long enough. How do I install a 5/8


... KitchenAid KUDS30IXBL Builtin Dishwasher

Dishwasher hose not long enough


... Frigidaire Dishwashers

Installing a built-in LG dishwasher; got everything ready to go, but a problem with the hot water line coming in. It is barely long enough to reach to the front where I've installed the elbow. Since I have to back the dishwasher in to the 24 in. hole there is no room for error in terms of not running over this hose with the bottom of the dishwasher. Any tricks to handling this situation?


Hi, best way would be to install a "spring" attached to the back of the dishwasher. The hose would connect to that and easily "pull-away" when moving or "pull-tight" taking up the slack. A much simpler method is to tie a piece of string to the hot wa ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

My frigidaire dishwasher did not come with the drain hose. Is this something I can get from a hardware store or would I have to order it from the manufacture?


Id order it. sometimes other hoses causes leaks. different material ... Dishwashers

I have 2 Viking VD141 Both DW are not getting enough water. They run and the soad dispenser opens but Their is very little water if any....I have taken the hose off and it is clear (no clogs) I have viking DW and Duel fuel Range. All of these appliances have been terrible. I have had service at least 2 times a year on both the DW. I use my oven in the basement as the range. takes FOREVER to pre heat and over cooks every thing. Don't buy viking they s$%#


You don't say what happens after the dispenser opens.These units use very little water and thus need very little soap, you can only use powder no cubes or liquid. It uses less than a tablespoon of soap. Also use jetdry it makes a huge dif ... Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher

Good Morning, I have a LG dishwasher, model LD-2052SH. The included water supply hose is 1.5 metres long, I would like to purchase a 2.5 metre long hose. Could you please give me details as to where I could obtain the hose. Thanking you in anticipation.


... LG Dishwashers

Our dishwasher has been running for over 2 hours.


We called Best Buy and they have agreed to take it back. After reading all the horror stories I have seen on line with the Whirlpool dishwashers, we will be looking for a different brand. I will be doing considerably more research before our next d ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

Hose hookups My Bosch SHU43 dishwasher has no manuals. My problem is that I have one long hose that should be the discharge hose but no fitting to hook it to my disposal nipple. My other problem is there is another hose that exits the dishwasher about mid level but does not hook to anything. Should this hook to the supply?


The smaller hose should be 3/8" is the water feed the larger hose is the discharge. you can open the front panel (2 torks screws) and you will see the water inlet valve in the left towards the center the electrial box is on the far right ten determin ... Bosch 24 in. SHU43 Built-in Dishwasher

Miele dishwasher makes grinding noise when turned on, there is a light on front next to inlet/drain. So I poured some boiling water into the dishwasher and then left it turned on and could feel the boiling water coming out of the drain hose so I am assuming it is an inlet problem, as it will drain but will not fill or otherwise work.There are a few small cracks in the outer hose of he inlet hose just below the grey box thing, could that be enough to cause the problem? They are only small so I di


... Dishwashers

I just bought a simpson silenco 850 dishwasher & my son picked it up & took it to the property to install it .He said the waste pipe hose was missing the rubber end with the silver clip to hook on .Do I need to buy a new hose or could I find another rubber piece to slip over & re-attach the clip? Thanks


... Dishwashers

I have an Excell 2500 psi with Briggs & Stratton 6.5 HP engine that starts, builds pressure and maintains high pressure as long as the hose is not connected. But as as soon as I connect the hose, it loses all pressure. Is it the pump?


... Pressure Washers

Kenmore Dishwasher model 665.1675592 doesn't seem to wash as well as it used to. Seems to have a low water level. Filler valve works, allows water in, but never seems to fill enough. No spray reaches top shelf, I think due to insufficient water level. It's like the timer doesn't stay on long enough for it to fill. Also cycle time seems WAY up, but if the timer is slow, how does it time out filling so fast? Looks like it would be slow all the time. Suggestions?


... Kenmore Dishwashers

Where do I go to get a new hose for the Mac FHH18a? My hose head blew off, and the pieces are long gone.


... McCulloch FHH18A Electric Pressure Washer

I have a maytag portable dishwasher purchase it 14 months ago, the hose that attaches to the faucet leaks and wont stay connected, is it worth buying a new hose?


You need to replace the faucet adapter ... Maytag MDC4650AWB 24 in Builtin Dishwasher

Frigidaire dishwasher (Electrolux FDB750RCB0) does not move water through the hose to the upper wash/spray bar. The lower wash/spray bar has pressure enough to turn. With the dish washer out from under the counter I can see the water rise very slowly up the translucent hose. If I remove the check ball under the stem assembly in the motor in the bottom of the tub, water flows, but I'm not sure if the top bar turns then (with the door open I see water coming down from the top, but never saw


... Dishwashers

Hi I have an old Karcher 200. Works great but the hose has sprung a few leaks. I live on the Gold Coast Australia. Where can I buy a new hose?


... Karcher K2.26 Electric Power Washer

What size of o-ring do I need for the Husky part close to the garden hose input where there are multiple o-rings. My washer tank is leaking and I have determined one of the o-rings is shot. I don't know what size to buy or where to buy it.


... Pressure Washers

Pump problems we have a mobile car wash service that we use in the winter months we have a 300 gal tank and several power washers.we use 3 diffrent machines [email protected] gal 2500 [email protected] and a3000psi @3.0 gal i;m having a lot of pump problems with all of these machines.a friend that he thinks that the hose that the machines feed of is to small 3/4'' he suggests i use a1 1/2 hose as close to the machine before adapting to the 3/4'' fitting right now it;s about12'' long away from the tank.any info wo


Are you only using gravity to feed the machines. The law of gravity is that, for every foot of elevation you will get 2 PSI ( pounds per square inch) of pressure. You can figure out the minimum volume that the manufacture requires and make sure that ... Comet GXD2527G Pressure Washer Pump

I recently purchases a KitchenAid dishwasher model kudsosfrss from a thrift store (I know, silly me). On intallation I learnd why it was in the thrift store. The Normal and Start/Resume buttons are dead on the keypad, and the washer will not run. I don't want to throw good money after bad, but if I can buy parts and fix it myself I figure it might be worth it. Any suggestions?


8574143 is the part number for the black console control panel which is the part i believe u want,, u may look at it or purchase it at repairclinic.com, searspartsdirect.com, hope this helps let me know ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Inglis dishwasher IJU 58663 does not have enough pressure to drain through the hose but the hose is clear


Clean pump check for broken parts on impeller ... Dishwashers

Hi, our dishwasher runs too long and smells bad. Seems to get stuck for along time during the heating period. The water coming in is hot enough but then after heating it for a long time seems to be more luke warm. Thanks, joe


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers…Dishwasher Problems The ... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

Hello i have a Miele Automatic G579, Every time i try to connect the water hose to the tap it never seem to be tight enough as it always leaks, i have a standard tap for UK and the hose connect dose fit just right but always seems to leak ?


Is the washer in the fitting missing? ... Miele 24 in. G646SC Plus Free-Standing Dishwasher

High pressure hose connection blew up. Fix? or buy new?


Yes take it to napa auto parts and they can cut and attach a new end which are for hydraulics. They are crimped on and meant to hold very very high pressure. I used to use a pressure washer everyday for a living and it was a tractor rental/repair sho ... Pressure Washers

Drain hose leaks. can i buy a replacement house


You can use generic hose. \012\012Turn the breaker off.\012\012Remove your unit. It may have screws holding it to the underside of the counter. You may also need to lower the front legs by turning the feet with a wrench.\012\012Look ... Bosch 24 in. SHU66C05 Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0647 seconds