Having problems with your Dishwashers ?

My AEG dishwasher flashes error code 20 - what to do?


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

AEG OKO_FAVORIT 6281i dishwasher - error code 20 (Siphon blocked). Out of the blue after 6 years of reliable once-a-day family use, my AEG OKO_FAVORIT 6281i dishwasher started OK but about 3 minutes into the cycle began flashing error code 20. At which point there was a litre or two of cloudy water sitting at the bottom of the machine. Since then I've tried redirecting the drain hose into a bucket, after disconnecting it from the kitchen drain. Same symptom, and no outflow except what was al


... AEG 23 in. Favorit 50750Vi Built-in Dishwasher

My AEG dishwasher flashes error code 20 - what to do?


... Dishwashers

Aeg dishwasher error code 3 beeps and flashing


... Dishwashers

I had a black out and the dishwasher was running at the time. The dishwasher emptied out all over the floor. when the power came back on the dishwasher was flashing an error code 4. I rang Whirlpool for assistance and they said it was over full but it was totally empty. We turned the dishwasher off at the wall hoping it would reset but it is still saying error code 4. Can you suggest something else we can do?


The trouble looks to be little confusing. Whenever the power failsduring mid cycle this happens. Try running the balance cycle. Since you say the water is fully drained, try adding water manually tothe wash chamber to certain ... Whirlpool Dishwashers

AS PER DIRECTIONS FROM TECH, I PURCHASED AND INSTALLED A NEW CONTROL UNIT. THIS WAS BECAUSE MY WHIRLPOOL DISHWASHER GOLD GU2300XTLB3 QUIT WORKING IN ALL CYCLES EXCEPT SHORT CYCLE. PUT EVERYTHING BACK TOGETHER AND TRIED TO GET THE DIFFERENT CYCLES TO WORK. NOTHING WORKED EXCEPT THE CLEAN LITE FLASHED A CODE 7.(FLASHED 7 TIMES THEN QUIT. THEN IT WOULD FLASHED 7 MORE TIMES THEN QUIT) iT HS BEEN DOING THIS FOR WELL OVER 24 HOURS. WHAT MUST I DO TO GET BY THIS ERROR CODE AND GET IT TO START W


Hi,This is a common problem with Whirlpool washers.If\015\012the clean light is the one flashing then your dishwasher could have a\015\012heater circuit problem (depending on the age) or this could simply just\015\012be water colder ... Dishwashers

Reset code I recently had a problem with my dishwasher that required me to use a reset code on my control panel. I can no longer find the manual that tells me that code. I was wondering if anyone knows it as to save a tech call. The error occurs when the clean light flashes. We have checked the heating element and the tech told us there is no problem there, we just need to reset the machine. The error has occured again, but this time because I tried to run the machine right when we came home fro


I believe the reset sequence is accomplished by pushing the NORMAL WASH then HEATED DRY buttons in that sequence two to three times. The unit will enter diagnostics mode, but can be stopped by pressing the CANCEL button. Let me know if this helps. ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

Error code .60 AEG dishwasher - AEG 24 in. Favorit 86050Vi Built-in Dishwasher


... AEG 24 in. Favorit 86050Vi Built-in Dishwasher

C4 error code ge dishwasher AEG - AEG Dishwashers


... AEG Dishwashers

Frigidaire PLD4375RFC Dishwasher Dishwasher. Error code PF keeps flashing. I can open and close the door, it goes off. A litle later it starts flashing again. PF, means power failure


... Frigidaire PLD4375RFC Dishwasher

Samsung dishwasher flashing error code ce


... Samsung DMT800RHS Dishwasher

HOTPOINT DISHWASHER BFI 620 ERROR CODE LED FLASHING 1 & 3


Check the end of your drain hose for the clog. ... Dishwashers

AEG 50760 Dishwasher shows Error Code 30


There is water in the base of the macine. lean it over to the side to get all of the water out then try again. ... Dishwashers

My asko d3250 thinks the drain hose is blocked. but when i pour water in the dishwasher to see if the water is being drained, the dishwasher is draining properly. Yet the dishwasher after it has drained the water, will shutoff and start flashing the Large Pot icon (drain hose is blocked error code). Is there a sensor that is faulty?


Yes, it sounds like it is to me. I'm not able to pull your model up on my data base,if I could I would be able to tell you where it is located. I would assume that it's located either inside the pump or close to it. Sorry I couldn't be more help. ... Asko Dishwashers

My dmr78ahs dishwasher is flashing an error code of 9E


... Samsung Dishwashers

Hotpoint LFT228A on off light flashing and error code 3 showing. Water left inside dishwasher.


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Whirlpool dishwasher adp4404/5 error code 6 flashes...


... Dishwashers

AEG F65070VI fitted dishwasher error code 46 & 30


This error is flood alert because of a leak in the tub. IT might be a seal but you have to remove it and drain it and lay it down to see and then you need parts. ... AEG Dishwashers

Hi My AEG favorit dishwasher shows error code i50 by the end of a program. What does this code stand for ? Cheers Bent


... AEG 24 in. Favorit 40850 Free-standing Dishwasher

I have a DWI 612C Smeg dishwasher I have an error code of the 2 right hand LED's flashing Have tried to reset the programmer (turn off, on then press program 4 times in 2 secs, wait 15 secs and turn off) This enables me to select a programme, but when the programme starts, after five mins it beeps and carries on making the draining pump noise and the programme never starts When I turn it off and back on I get the far 2 red lights flashing again Have looked for signs of blockages and can


... Smeg 24 in. DWI612 Built-in Dishwasher

My aeg favorit integral dishwasher is flashing 20, and there is water still in the bottom that will not drain away please help. and every time i put the dishwasher on it starts but after a couple of minutes it stops beeps intermittently and says code 20! please help thanks


... AEG 24 in. Favorit 60830 Free-standing Dishwasher

Have a frigidaire dishwasher (model- PLD4375RFC0)about 2 years old. Set to run as we left to go out of town- when we came back all lights flashing including error- found a child's plastic bowl that had fallen to the bottom and had a melted spot as it was next to the heating element. Called support and were told to master restart- shut the power off for 15 minutes. Did and now flashing "27". Cannot find a code for that and neither could support without sending out a repairman. Any advice before


... Frigidaire Dishwashers

Hi Masters! My dishwasher was stopped during the program and the second LED ( from the four ) is flashing. Please send me the ARISTON LS 248 T dishwasher error code list if you could or please give advice for me. Many thanks,


... Dishwashers

Model GSB6400NDC0 replaced control board, now all lights flashing on LED with error code Er. Buttons flash when held. Dishwasher will not register settings or work at all.


What is the part number you replaced?\015\012It is possibly the wrong one.\015\012\015\012Thanks ... Dishwashers

Hotpoint bf162 built-in dishwasher error code soak programme flashing cannot rest the machine either, what does the flashing mean please?


... Hotpoint 23 in. BFI62 Built-in Dishwasher

AEG Favorit .30 error code?????????????? - AEG 24 in. Favorit 3A Free-standing Dishwasher


... AEG 24 in. Favorit 3A Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1883 seconds