Having problems with your Dishwashers ?

Hotpoint dishwasher uses excessive salt. Full resevoir disappears used after a few washes. User guide says it should last about a month.


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hotpoint dishwasher uses excessive salt. Full resevoir disappears used after a few washes. User guide says it should last about a month.


... Dishwashers

We bought model KUDS02FR in Nov. 2005. The last few months we have had a residue on many of our dishes, esp. plates and bowls, when we unload the dishwasher. We've been double-checking the detergent dispenser, Jet Dry, and the way we load the machine. We have rewashed dishes, but it doesn't seem to have solved the problem. I cannot find a trouble-shooting guide in the Consumer Reference Guide, only information on loading and guides to the various racks. We have hard water and use both dispensers


Hi,Check your heating element.. Dishwasher ... KitchenAid Dishwashers

I'm using a GSD 1100G00WW that is probably from may of 1991, landlord says its fine but, I have had yuckie dishes for two months, how long do these last in hard water? My dishes seem to come out dirtier than went in and have scratches that I cannot wash off manually afterwards. I've used both liquid and powder detergents, same results. Thanks


... GE Dishwashers

My unit used to send steam out of the top but no longer gets hot. I'm sure the coil should be replaced. This unit was pricey and is used every 7-10 days over the last 14 or so months. My last unit lasted 15 years. How difficult is it to change the heating coil? How much is the suggested retail price?


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers...Dishwasher Problems The Heating Element not W ... Whirlpool GU2400XTP Built-in Dishwasher

Hi, I have a Karcher K3 pressure washer. 18 months old, used maybe 6 hours total. For the past 3 hours of use the compressor/pump seems to cycle audibly but pressure at outlet hose seems constant, hence I did'nt worry. Now it does not start with switch on. I now hear a buzzing sound from the unit. The unit was last used 6 weeks ago. The unit was stored in the garage away from frost, it does not leak water so I don't think there is any frost damage, but just this buzz. Any suggestions would


... Karcher K3.68MR Electric Pressure Washer

Matsui mf145 my dishwasher not working power& water on power light on next 2 light on but can't program it not been use for last 18 months


... Dishwashers

I have a 7 yr old GE Tritron XL dishwasher that I rarely use. Last time I used it was almost 2 months ago. A week ago I noticed a horrible rotting stench coming from the inside. I poured 1 cup of vinegar in the base and let it sit overnight. Next morning I ran the dishwasher with detergent but no dishes. Odor still there. Checked bottom of dishwasher for food - nothing there (I prewash dishes before putting them into dishwasher). Added 2 cups of vinegar, ran dishwasher on hottest setting. Sti


... Tappan MDB531RF Dishwasher

Dear Sir/Madam,I have owned a Beko DW450 slimline dishwasher for 13 months and used it only twice, i wanted to use it last night but when i switched it on the drain pump activated and would not switch off. I powered down the dishwasher to see if that would reset it but unfortunately when i started it again it did the same thing - drain pump activated but would not stop running, it is impossible at the moment to carry out a wash programme. Does anyone have any idea on this problem. Thanks, Patric


... Bosch SHU5315UC Dishwasher

665.16382300 Will not run. Pumps and heats but no wash cycle. Water"sputters" into disposal but will not go through a "wash" of any type. humms (pumps) when empty. Machine usage has been less than normal (one a week) last few months. Cleaning seems to have been deteriorating a bit over last few uses


... Kenmore Dishwashers

I have a Bosch "Classic Electronic" dishwasher that has been in use for only 18 months. If it helps - SGU53E05AU/30 is marked on top of the door.. my problem is that on the last cycle, the water won't drain so I am left with lovely clean dishes but there is water up to the drawer line present and it won't drain until the next wash. I have cleaned all the filters and ensured the pipes are not obstructed. It is odd that it only does it on the last cycle. Could it be the microchip?


Hi there,\015\012\015\012thank you for providing the model #, that helped me narrow down the troubleshooting.\015\012\015\012try the following to fix your problem:\015\012\015\012check for blockage or kink in the d ... Bosch Dishwashers

Bought a Kelvinator Extreme Clean KD2MMI dishwasher last month, installed it last week, my maid chucked my manuel en user guide away, who can I get a new manuel.


... Kelvinator Dishwashers

We have a model # 1385 Asko dishwasher. For the last few months we have found a film over all our dishes and pans washed in the dishwasher. We have found vinegar removes the film, but the need to constantly wash the already-washed dishes in vinegar to be defeating the purpose of using the dishwasher! We have used Cascade Complete for years, but we have tried different brands now, but nothing solves the problem. Can you please help us??????? Nancy Vocci


Hi \015\012Try running the hot water through the sink faucet, right before you start the dishwasher, so that hot water will instantly be there to run in the dishwasher, instead of it starting cold and having to warm up wh ... Asko Dishwashers

New - 3 months 665.1389 Kenmore dishwasher worked fine until today. end of cycle - water in bottom no directions in use guide how to clean drain or ?? No large items have been allowed on the dishes. don't have any helps in the guide about repair


... Dishwashers

I have had my Bosch dishwasher for about 2 years. Over the last 8 months or so my dishes come out with a white film over them. I do have hard water, but have had it for over 20 years without a problem like this. The white film is all over dishes, silverware and the inside of the stainless steel washer. I use a rinse agent and have tried many detergents. I have used vinegar to clean the inside. What can this be?


... Bosch SHE45M06UC Built-in Dishwasher

My KitchenAid undercounter Sculptura dishwasher Model KUDV24SE will not work. There is a message panel that says: "Rinse and empty energy monitor". The Use and Care Guide does not say where this is or how to find it. Where is it and is this something I can do myself?


I am pretty sure you are reading two different indicaters. One says Rinse Aid Empty, which means your rinsing agent dispenser is empty, This is in the door, unscrew and fill, don't overfill, usually lasts 3 months. Energy monitor is under this and ... KitchenAid Dishwashers

My Bosch dishwasher SHU3306UC/12 isn't cleaning the dishes as thoroughly as it used to. Also, there is a hard-water film on all my glasses. That never used to happen. I have had the dishwasher about 8 years and it has run fine, except for about the last 6 months


Hi\015\012\015\012Thanks for using FixYa. First of all please check the Water temperature by using a thermometer inside the dishwasher to measure the water temp. It should be as close to 125 degree F to 140 degree F as possible. Now try u ... Bosch SHU3306UC Built-in Dishwasher

Blown Motor DW is about 16 months old. Started making some real bad noise. Lasted about a minute and then had a death howl. Called in repair tech who says motor is blown. $399 for repair which includes $125 for the part. I've rebuilt car engines, so can probably replace a DW motor. Any insight on how to replace the motor? is it worth paying 275$ for labor? Just bugs the hell out of me paying $400 bucks for a repair when i can get a new one for $450.


I haven't changed that particular brand of dishwasher motor, so I cant give a step by step, sorry. I do know the other brands it is optional to get the motor alone or the motor with the pump assembly attached, so you may want to ask abo ... Maytag 24 in. MDBH950AWS Built-in Dishwasher

Kenmore Dishwasher Model 665.11643300 Cycle will not run. Normal Wash light blinking Cancel light will also blink (but can be cancelled by holding button down) I tried shutting down the power and resetting at the breaker. I tried other buttons like Air Dry, etc to see if there was some sort of sequence Note* last cycle ran was rinse cycle many months ago - house has been vacant and dishwasher has not been in use.


I will look a bit further in detail about your dishwasher problem. I am assuming you have checked the inlet water tap to the dishwasher is turned on. ... Dishwashers

Troy-Bilt 2550 20293 pressure washer not producing pressure. Worked when last used 2 months ago. Pump pistons are moving up and down when engine is pulled through. Inlet water is flowing through pump but no pressure when engine is started. I have the same problem. Water flows thru the pump when not running, but no flow or goes in by-pass mode when I start the pump. The pump being Troy Bilt Model 020296-01. I replaced unloader valve even. Anything else I can do?


You replaced the unloaded valve. Are you positive you have the unloader screwed to pressure and not turned the opposite way? You will have no pressure if it is adjusted wrong. One other thing I have encountered is that the unloader has a ball bearing ... Pressure Washers

In the last month I have noticed that my dishes aren't getting clean. My dishwasher is less than a year old and has done a great job so far. I tried adjusting the amount of rinse aid and the amount of soap but nothing works. the dishes come out "clean" without food residue on them, but they are so cloudy that I don't want to use them. I will go back to handwashing and sell the dishwasher is this is the way it is going to be cleaning. (The repair guy said nothing is wrong with it.) It is mod


First I would run the hot water until hot. Then start the dishwasher on the longest setting with the dispenser door closed( no detergent). Then after about 10-15 minutes open the door and check to see if the dispenser door opened, it should have. The ... LG Dishwashers

Hi I have a LG dishwasher, model LD-2052WH/LD-2052SH/LD-2052MH. The machine is about 30 months old, and used very seldom. In the last two weeks we noticed a very loud "grinding" sound emmiting from the machine. This sound usually happens when you switch the machine on as the water if filling or the wash blades are rotating. What is the cause of this, and how can I get it fixed? Regards Paul Naidoo Ph: 0027 83 651 7558


... LG Dishwashers

I have a Bosch SL1501B dishwasher. When we try to use it is it saying to check water. It is really cold just now and was -7 last night. Do you think it could vbe frozen?


If there are problems with water supply elsewhere in the house, then it could be due to frozen pipes.If the machine has just been installed, then check that the stop valve on the feed pipe has been opened. ... Bosch Dishwashers

LG Dishwasher hasnt been used in months. When I went to start it it says error. What do I do?


Make sure taps are turned on and the water is coming into machine, check drain hose under sink make sure it is clear with no kinks ... Dishwashers

Kenmore Dishwasher Model 665.1622Clean light is flashing, Use and care guide says when this happens the dishwasher has malfunctioned. Call for service. There must be a simple fix?


This happens if the water temp sensor is not seeing a temp rise in a specific time. Make sure you run hot water to sink before using. This problem is often caused by a bad heater. This can be checked from the control board in console. You need to ... Dishwashers

Troy-Bilt 2550 20293 pressure washer not producing pressure. Worked when last used 2 months ago. Pump pistons are moving up and down when engine is pulled through. Inlet water is flowing through pump but no pressure when engine is started.


Ok I wasnt satisfied w/ the previous answer so I did some digging. I took off all the hose attachments and drained the line. I then checked for any clogging in ALL the screens. As usual the wand screen was clogged. this is an easy fix w/ a safety pin ... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0563 seconds