Having problems with your Dishwashers ?

My frigidaire dishwasher model number fdb710lcq0 serial number th41839536 just stopped working and i have no idea where to begin to search for the problem. Also i am not very mechanically inclined..


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My frigidaire dishwasher model number fdb710lcq0 serial number th41839536 just stopped working and i have no idea where to begin to search for the problem. Also i am not very mechanically inclined..


... Dishwashers

I have a GE Profile Model# PDW7700G00CC that trips the circuit breaker when I hit the start button to begin a wash cycle. Green lights are on when I re-energize the unit but problem repeats when I hit start... Any ideas?? A blog pointed to a in-line Harness Transient Absorber or: "TransOrber". Also a Flood Switch and possibly the PC board... I can replace the parts... Just need to know what parts to order... Thanks! Steve


... Dishwashers

MyWhirlpool model number DU920PFGG2, serial number FJ3453664 is leaving a white chalky film on my dishes. The rinse cycle sounds like it should be working but it isn't rinsing well. We are also using jet dry but that isn't helping. Any ideas? Thanks


... Dishwashers

Kenmore dishwasher I have a kenmore dishwasher and in the middle of a cycle all my front panel lights went off. I have checked the power going into the dishwasher it is fine. I also checked the door latch it is fine. Not sure what else to check? Same exact problem model number 665.15934 We have had nothing but problems with all of our sears products - highly suggest to SHOP SOME WHERE ELSE before you get stuck too.


Check the continuity of the thermal fuse (part # 8193762). It's clipped onto the electronic control inside the console.Let me know if you need more help. ... Kenmore Dishwashers

Dishwasher We are having a problem with our Whirlpool ADP5540 dishwasher. We have just moved into a new house with this model dishwasher and have tried running it on a number of cycles. It always seems to stop part way through and the start button then flashes three times. Any ideas what the problem is or how to fix it?


If\015\012this is a blinking "clean light", this is a common problem with some\015\012of the Kenmore\015\012and Whirlpool models. I believe the problem is attributed to water supply\015\012temperatures being too low when filling. Apparently, th ... Dishwashers

Hello all, We have an Ikea Whirlpool DWF 416 that is a couple of years old and has never caused any problems. From today the door has stopped shutting properly. The electronics and internal mechanisms seem to be working fine, since when you turn it on the cycle starts - but only if you hold the door shut. Has maybe a catch gone? Any ideas for fixing a door-shutting problem like this? Thanks in advance! Dave


The catch is no longer working. Contact IKEA for the replacement part. I'm sure it's available through EBAY or something, but probably not guaranteed or as reliable. ... Dishwashers

Model number 665.13763k600 Seems like dishes on the top rack do not get hit with a lot of water. Also, when soap packets are put into the soap compartment, the soap packets no longer dissolve. It appears that there may be a problem with water flow. Have had the unit for a few years. Wondering if it could be a filter or something?


... Kenmore 24 in. 16039 Built-in Dishwasher

My SE53200GB/01 fails to input water. I have checked the inlet supply hoses and filters and they are clear. I have tried different programmes and they all activate but the water fails to enter the main chamber. Any ideas what may be the problem. Could the Aqua-Stop mechanism have kicked in and if so, how do I rectify it? Thanks


Your aquastop system is activated :deactivate by turning off the water supply, running the dishwasher so \012that it is expecting to fill (if you hold the grey square box at this \012point, you should feel it slightly vibrating, which is a good sign ... Siemens Dishwashers

We've got an Meile Incognito dishwasher, model G 843 SCVi plus. It purges at the begining of the cycle and then seems to fill with water, but then the red Intake/Drain light starts to flash and the cycle goes no further. I've removed, checked, cleaned and replaced the triple filter and the drain pump but the light is still flashing. I spun the propeller both ways, no problem there. Any ideas for me?


... Miele 24 in. Incognito G843SCVi Built-In Dishwasher

I have an ASKO D3250 and it has recently started making a loud noise from the pump area. It starts as soon as the cycle begins and doesn't stop even if you open the door. It seems to stop about 90 seconds into the cycle. Noise is best described as a noisy solenoid but could also be some sort of actuator that is stuck. What part is the problem?


All power and sounds should stop when any dishwasher door is opened.Your door switch may be stuck causing it to continue.The 90 second sound at the beginning of the cycle is the water pump extracting any residual water before taking on cl ... Asko 24 in. D3250 Built-in Dishwasher

Am trying to deal with source of non-draining problem-drains but not complteley. Have remove three screws from love plate but cannot seem now to remove the assembly (which also golds the lower spray rotor). Any ideas.


If it is a Bosch, the following just worked for me: pull out screens and on left side of sump (looking down into bottom, 9:00 position) has a torx screw holding cover over drain pump, remove screw, cover has tab towards backside to lift towards you. ... Dishwashers

I HAVE A BOSCH SHU3036UC WHICH IS NOT CYCLING PROPERLY. THE PROBLEM IS PROBABLY THE TIMER. IS THAT SOMETHING THAT SOMEONE WHO IS MECHANICALLY INCLINED CAN FIX THEMSELVES OR SHOULD I CALL IN A REPAIRMAN?


Hi,\015\012 \015\012As you told me that your dishwasher is not cycling properly, and you sense it is the timer, but before you come to a conclusion and get the timer replaced I would want you to look out fo ... Bosch SHU3036UC Dishwasher

I have a KitchenAid drawer dishwasher model kudd01dppa and it has a mind of its own starting and stopping in the middle of the night/day and chiming all different beeps and sounds like its computer is glitching out. We had a service person out and they changed the main computer board and it seemed to fix it for a few days then started again. They gave up. They also tried some sort of reset or reboot but nothing has fixed this intermitten but long term problem. Any ideas?


"it seemed to fix it for a few days then started again" (sic) OK, well if this is so, then in my experience you are getting some, sort of Power Bourne Spike, Surge, or Transient, problem. If there is nothing else it can possibly be. Use a Pow ... Dishwashers

My general electric model number pdw8200j03ww dishwasher continually leaves my glasses with small food particles in the inside. i am not sure where i need to ''cleaning'' the diswasher out to get rid of this problem. i am also not sure to take everything apart


... GE Dishwashers

BOSCH SHE43 Dishwasher My Bosch D/W makes a loud high-pitched squealing sound at the beginning of the cycle and for a few seconds intermittently while running. I have checked and cleaned the filter, made sure there are no obstructions in the bottom and I am stumped. I have only had it a little over 2 years, spent a small fortune on it and really hope it isn't something super expensive. Does anyone have an idea of what the problem could be?


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012Based on your description...as soon as you said "loud high-pitched squealing sound"...is where I knew what you`re talking about.\015\012\01 ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

I have a ADG450 about 7 years old, the problem is there is dirty water left at the bottom of the dishwasher after finishing the cycle and the dishes look as if they have had the final rinse in the dirty water. also i have tried the rinse cycle with no dishes and all the rinse water had not drained away. I have cleaned the iside of the washer and where the water goes to the pump. Any ideas


Check the pipe leading from the dishwasher to the outlet, maybe under sink. this needs to be raise up as water will flow back into washer. Had this problem myself, felt foolish when the repair man just tied it up and left. ! ... Whirlpool ADG450 Slim-Line Built-in Dishwasher

I have a F2 flashing on the top drawer. My dishwasher is only 2 years old. It started to bip on rinse and F2 was flashing. Also water does not drain when it get to rinse. I have this problem 4 months. I have no idea what's wrong. Will it be covered by the manufacture warranty? Please help. Many Thanks.


The motor has not\015\012been sensed rotating\015\012\003 Foreign object has jammed the rotor\015\012\003 The rotor has failed\015\012\003 The hall sensor has failed (small sensor on the underside of the motor)\015\012\0 ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

I have a whirlpool dishwasher thats a quiet partner 2. the cancel drain light keeps blinking and nothing else is happening. i try to unlock it and then the normal light starts blinking also and still nothing happens. i called a local repair shop and they said i need to change the control board so i did and its still does the same thing. can you give me an idea of where i need to start to fix my problem?


Can you here the pump running or check to make sure there is no water in the base... ... Dishwashers

I have a Maytag dishwasher model number MDBTT60AWW. The #3 light on the control panel stays on and nothing else works. Any idea what the problem could be?


... Maytag Dishwashers

Bosch SHU43C My Bosch SHU43C is stuck with the drain pump running. I ran the self-test and it gave me the fault code 4 wich indicates a filling fault. The washer is empty and all wash cycles display the correct number of minutes for the cycle. It counts down to 0, but the pump continues to run. Does this indicate a stuck float, or is the problem with the control board? Where is the float located? Are diagrams/pictures available on-line anywhere? I've done some searching, but haven't found any. R


My SHU43C is just over 3 years old. I had a similar problem recently. First, there were a few floods. Then, the Bosch only drained non-stop. Even when I used the Cancel Drain buttons the drain pump would run without stopping. When I ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a Maytag MDB7600AWB dish washer. I have a door leak, dripping from the right side. I can not see anything that would allow it. It seems like it could be coming from the inside of the door. Also, there is heat and condensation on at the top of the door, above the leak. It could be that steam is coming from the top right and dripping down the door. Could you give me some idea about fixing the problem.


HI,Check for the following troubleshooting steps:Some leaking around-under-from the door on dishwashers can be traced back to a split in the spray arm. If the lower spray arm develops a split in it, the spray arm can turn too ... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

Hi, switch underneath our miele g646sc washing machine burnt out. It is situated in a round case, with a polystyrene disc above it. The whole of this plastic case, abour 3" dianeter is clipped under the main body of the machine. Do you know what this one does so that we can try and rectify any problem that has caused the burnout, and any idea of part number or where we can see an exploded part drawing? Thanks! Steve


It is usualy caused by dampness from water in the waterproof tray. the switch is for flood protection.a miele service agent would be your best bet ... Miele 24 in. G646SC Plus Free-Standing Dishwasher

JennAir JDB1080AWS I have a jenn air jdb1080aws and the light console has gone out. The lights are very dim and you cannot change the cycle. If you press one button a different one lights up and very faintly. Also the timer does not light up anymore. If I replace the panel-con Part Number: AP4364294 would this fix the problem. Thanks


... Jenn-Air 24 in. JDB1080AWS Built-in Dishwasher

We have an Ariston built-in dishwasher type number LS12-TD. Every time we turn it on it fuses all the plug sockets in the house. We've checked the socket and that's working, does anyone have any ideas what the problem might be and how we could fix it? Thanks in advance


... Ariston Technologies LL64WNA Built-in Dishwasher

I have an Ariston LSI 61 dishwasher that keeps stopping half way through the wash cycles. Has anyone any ideas what the problem might be and also how to fix it???


... Ariston Technologies Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1287 seconds