Having problems with your Dishwashers ?

I need to locate a circuit board part for a miele dishwasher G692 SCI PLUS. The part number is EPL 545-A. M.-NR. :05491860. iF YOU CAN HELP ME FIND WHERE I CAN BUY THIS PART IT WOULD BE MUCH APPRECIATED.


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to locate a circuit board part for a miele dishwasher G692 SCI PLUS. The part number is EPL 545-A. M.-NR. :05491860. iF YOU CAN HELP ME FIND WHERE I CAN BUY THIS PART IT WOULD BE MUCH APPRECIATED.


... Dishwashers

I'm doing some repair on a Karcher model K 2400 HH. Are there any repair manuals or diagrams for them? I have been on many websites including the Karcher site and can find nothing. I know they want you to take them in but a guy should at least be able to see a diagram or an exploded parts view. Any help would be much appreciated. Thanks Rich Schneider.


I find this link and gives a good breakdown of Karcher PW in ALL PARTS. It does not have K 2400, but try this link for K240. You can tell whether it covers your machine or not.http://www.pressureparts.com/TreeView.aspx?node=71067&node1=72 ... Karcher Pressure Washers

Parts needed I need an outlet pipe Part# V24A000Q8 and four brackets Part# V13A000A9 for a Equator model #SB-72/1 dishwasher. Any place where I can find them. Equator is out of stock and it could take 6 weeks to order. I would appreciate any help you can give me! Thanks, Pearl


If the manufacturer is out of stock...chances are you will not be able to find them anywhere else. Your best bet would be to go to a metal machinist shop and have some custom made. You can have this done for the pipe as well. ... Equator SB72 Built-in Dishwasher

I have an electrolux wt30 m/n LS6 dishwasher, trying to find a wiring schematic so I can try and rewire it to operate on 220v 1 phase, presently it's wired for 220V/3 trying to find a site that may offer a parts and repair manual w/ schematic would appreciate some help in resolving this problem


... Electrolux Dishwashers

Where can I get the instruction manual for a Bosch Classixx Dishwasher SGS53C12UK? I have bought a second hand dishwasher that has only been used for 6 months. The programme works fine but when I go to use it again - check water shows on the display. I have to tilt the machine back as water is stored at the base of the machine, surely this is not normal? It there a simple solution to this or alot of cost involved with a new part? Any help would be much appreciated. Thank you.


... Bosch Dishwashers

Email address HI there, thanks for replying. My email address is [email protected] and if you can find the manual it would be much appreciated. I think we figured out where the rinse aid pipe goes to, that and the other one seem to go straight into the detergent bottles and they have a weight on he end to help **** out the detergent/rinse aid. I look forward to hearing from you soon


Service Manual emailed ... Electrolux WT30H240DU Dishwasher

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

Have the same problem as other with the maytag quiet series 300 model MDBS561AWB dishwasher. Two of the buttons on the front light up, but dishwasher will not start. Don't know if CBoard or the buttons or the ribbon cable is the problem. Took the door apart and couldn't find any condensation....Looks like maytag has done it again......could use some help with the cost of replacing all those parts. Will help me decide if better to buy new dishwasher.....preferrably not a maytag or whirlpool, or a


... Dishwashers

I have a Philco dishwasher Svelta DWN17 which works well but has lost its spring or counterweight for the door. The door now drops open when not locked for washing. I am having difficulty finding a servicing firm for this machine and would try to fix it myself if I could find a part and get some details on how to go about it. Can you help, please? Alan Wright


... Dishwashers

KENMORE THANKS FOR THE INFORMATION YOU SENT ME R TRENDLER I HAVE TO TAKE THAT AS THE BEST ANSWER I GUSS I JUST DID'T WANT TO HERE THAT.ITS TIME FOR A REPAIR MAN. FROM SEARS OR PUT IT TO THE CURB.BEFOR THIS I HAVE PUT 4 BUTTON PANELS IN THIS MACHINE+4 CIRCUIT BROADS.THE PARTS I BOUGHT ARE GUARANTEE FOR LIFE.DOSENT DO ME ANY GOOD NOW.700.00 FOR UNIT 350.00 IN PARTS CRAZY.I COMPLAIN TO SEARS THEY TOLD ME THEY WOULD HELP AND GIVE ME 10% OFF IF I BUY ANOTHER ONE HA .I DID'T MEAN TO GET DOWN ON YOU GU


Next time come here first we will always help ok dont buy ken more buy whirlpool its the same thing or frigidaire or ge they all make kenmore sears has changed from the old times sorry for your troubles wish we could have talked sooner follow that s ... Dishwashers

YES We are having aproblem trying to find a diagram of our kitchendishwasher there seems we cannot find anywhere online to get access to a drawing or diagram of some kind to help my husband . If you know of a website we can go to that would be greatly appreciated the dishwasher is a kitchenaid aaaaaMODEL kudso1ijwho THANKYOU


As a general rule, they are supplied in the unit, small plastic pouch, look around ... KitchenAid Dishwashers

Danby portable dishwasher ddw1899wp starts taking in water and then stops working with pre-rinse light blinking. Please help me on this issue. Any answer would be much appreciated.


If the water level sensor does not electrically shut off when the level needed is reached, the pre-rinse cycle will error out thinking that the level has not been reached. That sensor is a float device and probably needs to be replaced... ... Danby DDW1899WP Portable Dishwasher

Low flow Please advise how to disassemble Delta shower head A112.18.1 I have the handle portion apart but can't find the key to removing the head portion. Your help would be appreciated. Gene


... Dishwashers

Hello, My Frigidaire dishwasher model number FDB1250REC2 is not starting the wash cycle, instead, the washing light starts blinking continuously when I press start. I turned off the breaker to the dishwasher and tried to start a load again, same problem! I would really appreciate any help that you can give. Thanks so much!


... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

I have a Dishwasher (LG2040WH)with Error Code E1 displayed. In user manual as some sort of leakage in pipes or due to damage?, but badly translated. I can't find any obvious leaks. Any help would be greatly appreciated.


... LG Dishwashers

I have a Maytag Quiet Series 300 Dishwasher (can't find any other model number etc). The normal and high temp wash lights are steady and the Start/Resume light is flashing. I've tried turning off the power and the high temp, heated dry, high temp, heated dry sequence but nothing works. Any help would be really appreciated! Thanks


... Maytag 24 in. MDB5651A Built-in Dishwasher

The lower spray arm came off during a dishwasher cycle and melted. The dishwasher is okay but I need a replacement spray arm for a Sears Galaxy dishwasher model number 587.15139400 I have searched google for replacement parts for this model and have not found a place where I can get a lower spray arm. Any help would be appreciated.


Sears parts dept ... Sears 24 in. 14181 Built-in Dishwasher

I have an Electrolux Dishlex DX303 Dishwasher. Recently it has been stopping early in the cycle and the display shows -10. The selected program is flashing. The cycle will restart by pressing the program button again but it no longers wash's right through the wash pe=rogram as it is meant to. I do not have the manual to trouble shoot and find out what this means. Your help would be appreciated. Regards Peter H


Hi peter,\012according to manual book -10 is not filling water fast enough.\012check inlet hose and valve, check pressure switch and pressure SW hose and clean sump filter which located bottom of tub that plastic strainer and stainless mesh clean the ... Dishwashers

I have a Bosch SGV4313GB/13, when the dishwasher finishes we find that the dishes are not as clean as they use to be, we also noticed that door for the dishwasher powder is open and powder is still left in the slot. Any help would be appreciated. David


... Bosch Dishwashers

Trying to find the dimensions of the Miele G694 SC Toughtronic Turbothermic Dishwasher. It doesn't appear to be the standard 24 inch size and wanted to verify the dimensions before I replace it with another dishwasher. Any help would be appreciated.


Hi,\015\012\015\012if you go to the Miele website you should be able to download the manual for the machine if you don't have one and in the installation part of the manual this should give you dimensions. if not Miele service dept should ... Miele 24 in. Touchtronic G694SC Built-In Dishwasher

Owners Manual I need to find an owners manual for this dishwasher in my new house. Any help would be greatly appreciated?


I uploaded one to this site ... Miele 23 in. Novotronic G841 Built-In Dishwasher

Please advise how I can safely remove the water and energy rating labels from from my Dishlex DX103 dishwasher,without damage to the paint surface. The labels are stuck firmly and can not possibly be peeled off.I would very much appreciate your help. Thank you, Heather Jenkinson


Hello Heather,\015\012Most labels can be removed with isopropal alcohol without affecting the painted surface.. Try a small amount on a clean cloth to verify that it doesn't 'cut' the paint.. ..but that should work for you.. ... Electrolux Dishwashers

Bosch KGV2620GB/03 Hi, I have a Bosch KGV2620GB/03 fridge freezer (bottom freezer, free-standing, the product listed below isn't right) and the light in the fridge won't switch off when the door closes. Any ideas? I assume it's something to do with the switch that registers the door has closed, but not sure how to fix. It's an electronic control, so there's no temperature wheel/switch inside, and we don't have the user guide (which I also can't find online!). Any help much appreciated. Dan


Hi,\015\012 If it is the one I am thinking of, then the whole light assembly is actually able to move and this also acts as the switch.\015\012\015\012Turn off the appliance and unplug.\015\012\015\012You should be able ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Hi I have a Candy cd242 dishwasher all of a sudden it has stopped washing, I found that the feed hose had a kink in it so have re- routed that. But now the timer appears to go around but only part runs each section of the programmes, and then just ticks the rest of the time. Does any one know the problem or could it be a over filling valve that has sent a message to the controller. If so how do I re-set that. I would appreciate any-ones help to [email protected] cheers simon


... Candy Dishwashers

I have a Bosch diswasher She6Af02uc/03 and its not even 6 months old. There is an error code that keeps appearing e-02 but I cant find what that means? Any help would sure be appreciated! Thanks in advance.


The machine is under the makers 12 months warranty contact the supplier.adrian,,,,,,,, ... Bosch 24 in. SHU43 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1247 seconds