Having problems with your Dishwashers ?

Hi. we have W'house 905 dishwasher. Have had the element replaced. It gets to half way thru cycle then cutes out. Cuts off all electricity in the house. Restart again gets to half way then cuts electricity trip switch. Is ther an answer? Tks.


Answers :

\015\012Hi\015\012
\015\012
\015\012This is happening due to shorted wires or worn out wires connected to the element. It may also occur if you are not using the model specific part as replacement. Please get the element checked again for any cut or loose wires. Hope this helps... Please post back if you need further information.\015\012
\015\012Daniel
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi. we have W'house 905 dishwasher. Have had the element replaced. It gets to half way thru cycle then cutes out. Cuts off all electricity in the house. Restart again gets to half way then cuts electricity trip switch. Is ther an answer? Tks.


\015\012Hi\015\012\015\012\015\012This is happening due to shorted wires or worn out wires connected to the element. It may also occur if you are not using the model specific part as replacement. Please get ... Dishwashers

We have a classique dishwasher (cl 6 s-2 made in italy) has been not use for a while. when we want try how is working condition , turn program swith at half way and push on in 3 minits , have a electric shorting sound. after chack found 1, forget turn on water 2, at electric wire in the boteem one small cylinder part have burn. the main supply circuit breaker in the house when the short occured.


... Dishwashers

Hi got a baumatic dishwasher bkd62ss.1 model, it gets half way between the last cycle and cuts out and blows the circut board switch, can turn dial and wee bit and re switch circut board and away it goes again. what would be causing this problem. had dishwash for about 3-4 years? thanks


... Baumatic Dishwashers

Last month i was washing dishes in the dishwasher and if i remember correctly i opened the door to get a knife out of the dry cycle. i remembered shuting the door back and that is about it. this is my daughters dishwasher by the way. i left her house not noticing that the dishwasher ever finished. a week later she asked me if i had a problem with it. i told her no. when she goes to push the start button nothing happens. it doesn't restart its self. we have turned the breaker off and on


Hi.Depending on the model you may need to reset the dishwasher. Most Kenmore and Whirlpool built dishwashers for example need to press a reset button sequence to operate again after a problem has occurred. In that case you usually get lig ... Dishwashers

Dishwasher quietpower3 it is a liquid soap that we have always used. we have tried to cut the soap usage in half, and there is still build up of soap on the dishes. we have city water so good water pressure, and i ran 3/4 in. copper all the way through the house it is reduced to 1/2 in. 2 feet before the dishwasher


Hi again,\015\012\015\012Good water pressure and the right soap and still it builds. I have seen this before. It's most likely defective. With a new d/w it's always better to call warranty repair. As soon as you start to take it apart ... Dishwashers

We have a hotpoint aqaurius dishwasher df23n. When put on wash 4, the timer stops half way through and has to be helped. When the programme then continues through the rinse cycle, it stops half way through. I have tested the water heater and thermostat electrically and they seem ok. Is there anyting else that stops the timer at these positions? The timer knob is free to turn and is not jamming? Steve B


... Hotpoint Dishwashers

Ariston dishwasher keeps stopping half way through cycle


... Ariston Technologies Dishwashers

Our Dishwasher is not draining. We tried to run a test cycle and noticed there is no power. We checked the Electrical Panel and noticed that an unmarked breaker was tripped. We turned it on but still have no power. All other electrical items are working in the house. Is the power being cut off as a fail-safe function due to the water not draining? How do I fix the drain/pump? Please Help!


Hi,No, the water is a result of the dishwasher going off mid-cycle...Take the front kickplate off and see if you have power at the makeup box...you will need an electrical meter to check that...if there is power there then you have ... Dishwashers

I have a Troy bilt 2700 psi pressure washer and I can't get the pull start to pull all the way. It pulls part way and is stuck. The last time I was running it it shut down on its own and I haven't been able to restart it since. Thanks


... Pressure Washers

My dishwasher tripps out when it is plugged in, how can it be resolved? ----- when i plug the dishwasher into the socket, it cuts the power supply to some electrical points around the house. It trips out a switch in the electrical terminal box, what can i do about this?


There is a shorted component in the dishwasher that must be found and repaired. Requires hands on troubleshooting.Eric ... Dishwashers

Electrolux ESL 63010 dishwasher. This worked fine until the door catch broke. I replaced the catch but could not remember which way round the two electrical leads went (red and black). I tried both ways with the same result. The lights come on the control panel and I can change the programme, but on closing the door the house fuses blow. I have checked the earth cable is fine. Any ideas?


Red - is active powerblack - ground or neutral ... Electrolux Dishwashers

Zbd0710n20ss dishwasher woke up at 5 am to find smoke in house and dishwasher totally melted inside. counter was too hot to touch. Only way to turn it off was to cut the power. Luck the house did not burn down


... GE Dishwashers

The hidden control panel has only about half the lights showing what function is pressed. A couple of days ago the washer would not start. The only function which would work was the far left sensor light. After trying to cut power and pushing other buttons, to no avail, we let the machine sit a couple days. It now works again with only half the lights on function pad working. It acts like there was a electrical short.


First retrieve the tech spec sheet behind the toe-kick panel located near the floor and run the diagnostics if it will let you do so w/o the full operation of the keys on the pad,then if it wont the touchpad or keyboard on the front that you use to s ... Jenn-Air 24 in. JDB1100AWS Built-in Dishwasher

Hi, My dishwasher keeps stopping mid cycle and the door pops open. The soapy water is always gathered in the bottom and there's no way for me to get rid of the water, unless i restart the full cycle. The dishes are all getting stained with white marks, even though the salt and rinse aid is filled. Please help!


Sounds like the latch is worn out you mabe able to get a new one at appliancezone.com.... also check the drain for debris ... Baumatic 23 in. BDW9 Built-in Dishwasher

Hi, the Council shut the water off to our house then when the water was turned back on I put the Whirlpool dishwasher on and now every time I try to use the dishwasher it cuts the power to the house. Will i need to get a technician out to look at this problem?


Hello - Probably, but someone with basic electrical skills can check the wires in the power connection box under the unit. If these wires look good, the problem is best left to a pro. Some part of the circuit is grounding, causing breaker to trip. Fi ... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

Our cuisina dishwasher keeps tripping a trip on our main fuse box, the fuse on the plug does not blow however, this is happening every time i try to turn the machine on. it stopped half way through a cycle and wont restart.


... Dishwashers

Idl 705 Hi our indesit IDL 705 stops half way thought a wash with the red salt light on(despite salt being full), can reset it and get it away but not ideal any ideas? Thanks


I have the same problem, what was the problem and how did you resolve it? ... Indesit 24 in. IDL700 Built-In Dishwasher

My kenmore 16482 dishwasher was noisy and not cleaning very well. I removed the large motor underneath and found what looks like the plastic pieces that are on the electric motor shredded and worn and possibly some worn plastic in what im guessing is the pump housing. can these parts be serviced separate from the motor and where can i get them? thanks in advance


... Kenmore 24 in. 16482 / 16484 / 16489 Built-in Dishwasher

Hi, Had a power cut at my home and my Caple Di455DL Dishwasher was mid cycle on a glasswash program at the time, since power has been regained it will not restart or reset itself, it just lets a pulse of four beeps go once the door is shut and makes a sounds like its trying to pump out water? tried turning off at mains etc but cant get it to reset!


... Dishwashers

When I turn on the shop force 1750 electric power washer I get water pressure in intermittent time frames. For example, it may run for a second then stop for ten seconds, then start again for three seconds then stop for 3 seconds then start for a half a second then stop for five seconds etc. until ?. This type of pattern continues for at least ten minutes, which is when I give up. I have tried adjusting the the water hose pressure, high, low. middle, nothing changes. This happen when I have the


The usual cause of this is sticky Orings in the water admitance valve.\015\012\015\012Take the valve apart and clean the bore with crocus cloth wrapped around a rod and replace the Orings and lube with a bit of plumber's grease and reasse ... NIB Shop Force Universal Pressure Washer Accessoriesnib

When I start the dishwasher, it sounds normal. A few minutes after it starts, it makes a loud, thumping noise that lasts for several minutes. After a while, it stops making noise, but about half way through the cycle, it starts making the loud, thumping noise again. It's loud, annoying, and does not get our dishes clean. We have to wash several dishes by hand AFTER we have run the dishwasher.


I have made the assumption that your d/w is a siemens machine, however if not pls repost with the make and model.\015\012There are a few possibities...check the spray arms are clear by removing any blockages in the holes, check that there ... Dishwashers

Hi i have a bosch exxcell SGS45e62GB/68 it was showing check water,this has been resolved when i pulled the dishwasher out now which ever button i press it starts half way through the cycle,sounds like it's draining but there is no water in it and it gets to 1 and will not shut off ????????????????? thank you for any assisstance


... Bosch 24 in. SHU66C05 Stainless Steel Built-in Dishwasher

We have a Frigidaire Gallery Series dishwasher we just purchased in August. Model #GLD2445RFB2. We are experiencing a problem with it. We noticed it started running louder then normal and now it will not finish a wash cycle. It gets half way through and PF lights up on the display and the cycle never finishes. It doesn't matter which cycle we choose it has done it on all of them.


... Frigidaire Dishwashers

Half way throu my dishwashers cycle it fuses & turns everything in house off


This happens due to the high electric current requirement of the dishwasher and it is not receiving that required current so it try to start but due to lack of required power it shuts off the current in whole house.\015\012get the electric curr ... Dishwashers

Whirlpool ADG993, door fault: Hi, a few weeks ago soemthing broke on the door to my diswasher and it falls open wide with no stopping half way as usual. That was fine as the machine could still work, but now the door won't close. All seems fine until you get all but closed and then the door raises slightly from the bottom right corner, preventing it from closing. It looks like something may be jammed in there which pushes the door up at the last minute. There's a man coming out on Friday,


... Whirlpool Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0786 seconds