Having problems with your Dishwashers ?
When you pick a program close the door nothing happens.
Repair Help & Product Troubleshooting for Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
When you pick a program close the door nothing happens.
The program indicator light is on constant, but will not change programs when pressing the program selection button. And when you close the door to start the cycle nothing happens
Hi\015\012 \015\012Please check the link regarding your query…\015\012http://www.rep ... Dishwashers
Hotpoint dishwasher lft 114 - machine will not start the wash cycle - power light on, can step through each program usign the Program button, but when the door is closed nothing happens. No residual water in machine as far as I can see. Any ideas?
Hi there. I have a Matsui MF145 slimline dishwasher and having a problem. When I press the on/off button I would usually then press the program indicator button (usually the first indicator - pans) and close the door and the dishwasher would start. Currently i press the on/off button and try to press the program indicator button and the on/off button flashes and there is a continuos beeping sound....and nothing more happens. Do you know what the problem is?
Try to clean the unit, ofetn when the machine is dirty, some sensors are fooled thinking there's some problem. be sure there's no jam on mechanical parts. ... Dishwashers
Belling BE601 I Recently came into posession of a Belling BE601 Dishwasher, no Manual as is second hand. The condition of the dishwasher is as good as new, but when the door is closed after setting the program, nothing happens, it will not start up. I have checked the door switch and it is working ok, any ideas ?
Reset the display to -.if there's a number there it's the length of time later it will start at.both the start and the program have to be selected together..........but you also have to reset it after the last program ... Dishwashers
Zanussi zdt6053 in built dishwasher not starting. When pressing the control panel on/off button the 65 deg normal wash light comes on. When pressing the program selection button nothing happens. When closing the door the machine does not start up. Is there a fault in the control panel circuit board? Would water pressure prevent the machine from operating?
... Zanussi 23 in. ZDi6053SX Built-in Dishwasher
Defy Dishmaid DW12 stopped mid cycle and does not respond I checked for any moisture underneath the machine by opening the back and side panels. the only response that I do see is when the door is open the light burns but when it's closed, it is dead. By turning the program/ cycle knob nothing happens.
Exact same peoblem. Did you guys have any luck? ... Dishwashers
Hi, I have a Tecnik TKD/795 dishwasher (not sure which version - its the one with the three black rubber buttons on top). The problem is that the 'ready' button's led light is continuously on green 'on' so I can't change the program select. Also when I close the door to automatically start the cycle - nothing happens ! Please can you help ? Thanks Mr. Arwel Jones
Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. This issue can be either due to a\015\012faulty door latch or door lock switch which is not engaging itself. An ... Tecnik 24 in. TKD795/3 Built-in Dishwasher
I have a Whirlpool G2P DWI dishwasher and when I start the program the light comes on to say it's ready, but when I close the door nothing happens. I have tried turning it off and on again and also cleaned the filter but this hasn't done anything. Please help
HiThanks for using FixYa. To start with press and hold Air Dry for 5 seconds until the light turns off. If still the issue is not resolved then it means that the control has gone bad and needs to be replaced. Please do accept ... Dishwashers
Have a GE Quiet Power 3 Dishwasher. Went to reun it and when I closed the door no lights came on to pick a wash cycle. Nothing like it lost power. No buttons work, nothing. Opened door and removed inside door panel. Have power at door latch switch. Actually have power at all 4 connections and doesn't change when engaging switch as if door was closed. Switch does click but no power at front control panel. Whats up. I have my own Handyman/Home Remodeling business and I'm very good at fixing things
If your dishwasher is not running check the following \015\012\015\012You have already taken care of the 1st item.Power Supply The main power supply is the first thing to check. Also remove the toe ki ... Dishwashers
The dishwasher won't start, its stuck, pots/pan button is blinking, & the timer has (2)_ _ bars blinking. I tried to reset/pushed the start/resume button nothing happened. I pushed the cancel/drain button still nothing happened. I close the door tight..nothing. I check the trays if there something stuck inside..nothing. I unplug/replug the power cord nothing? my wife was using it when this got stuck about 3 weeks ago.
Did you hold the start/resume button for at least 3 seconds if this works the dishwasher will start ok but if there is a fault it will fail again best you contact your nearest service agent good luck ... Whirlpool GU2400XTP Built-in Dishwasher
I have a bosch SHU8815UC dishwasher. It was already installed when i moved into my apartment - so I'm unsure of the age. The dishwasher isn't functioning. When I open the door, the "Clean" light and the PowerScrub button are red. When i close the door, the light go off but nothing happens. One time I closed the door, it started to rev up but would shut off and beep three times after about 1 min. No water comes out. Any ideas? Thanks! June
Dishwasher model# FGHD2433KBI. washer was purchesed mid July, used 4 times. I just put in some dirty dish's and closed the door. A couple minutes later the washer turned on. No lights were on. After a few minutes I pushed the cancel button. Nothing happened. I opened the door and it sounded like a sucking sound and the pump stopped. No water in unit. I closed the door it started again. I cut the power at the circut box. Waited a few minutes and turned power back on. Power failure light came on.
... Frigidaire 24 in. PLD2850 Built-in Dishwasher
I have a Haier ESD312. I filled the washer, closed the door and pressed the normal button. Nothing happened. I tried the other buttons, Nothing happened. Now I have a full dishwasher that does nothing. I could not find even a clue in the user manual.
... Haier ESD312 24 in. Built-in Dishwasher
Mod gsd6209g00ww ser gf607466a i open the door to the dishwasher and there is a buzzing noise that will not stop. i tried to press the buttons to stop it. and closed the door again tighly nothing happened, also i fipped the breaker on and off and nothing happend.. please help me the buzzing noise is freakin my dog and out and it is annoying . thank you very much Jan
... GE Dishwashers
Tecnik DW2677 Hi, my dishwasher regularly starts to bleep after starting a wash program. When the door is opened it stops bleeping and the right hand light flashes 7 times repeatedly in sequence. By holding down the start and program change buttons together for a few seconds, it will reset. If you then close the door all is well for a few seconds the pump sound like it expells some water and then it starts to bleep again. The above process can happen several times before it decides to do what it
Check your water intake- i had the same issue - a leaky fitting wasn't supplying enough water to the dishwasher. had exactly the same symptoms you describe. fixed the leak, reset the dishwasher & it's working fine.\015\012\015\012\015\012\0 ... Tecnik TDW2677 Built-in Dishwasher
Good day after the power is turned on to my brand new kudc03fvss dishwasher, nothing happens. have made sure that the power supply is ok and that the door is properly closed. there is 115 volts at the circuit board inside but nothing happens. no lights, no response to switch etc. just dead. need some advice
You said your getting 115 volts and that is across the power wire and its neutral not a power and ground.. i had a case like this last week and when i got there the unit had power if tested from black to ground but not from black and the white neutra ... Dishwashers
Model KUDI24SEWH2 - the dishwasher was operating, I opened the door to add another dish. When I closed the door, there was a small click and nothing happened. The lights indicated to me there was rinsing and drying going on, but in reality, nothing happened.rn We were told it might be the thermal fuse, but have just check that and it is fine. It will fill, just not pump or drain. Any help?
... KitchenAid Dishwashers
There is a pool of water on the floor of the machine (inside). I have taken out the metal filter and the cone but nothing happens. I only realise this when I went to swithc it on and absolutely nothing happened when I closed the door. The lights go on, but there is no attempt to switch on!
... Neff 18 in. S5943 Slim-Line Built-in Dishwasher
Smeg dishwasher ST1145S is not working. After I entered the selected washing program and closed the door, the program failed to start. I am not sure is because of no prolonged disuse or because of I have forgotten to turn off the on/off switch for almost 2 months but I heard there is a beeping sound which supposed to start the program and water intake. But all this is not happening.
... Smeg 18 in. STX45-1 Stainless Steel Built-in Dishwasher
Smeg dishwasher ST1145S is not working. After I entered the selected washing program and closed the door, the program faked to start. I am not sure is because of no prolonged disuse or because of I have forgotten to turn off the on/off switch for almost 2 months but I heard there is a beeping sound which supposed to start the program and water intake. But all this is not happening.
... Smeg STX2 Dishwashers
I have a diplomat adp8342. I get three red lights going from left to right. I have checked to see if there is any water in the bottom and no there is not. I have reset it by holding the program switchand even if i pick the rinse cycle once i close the door the three lights go off. It seams like the drain pump is runing and when i open the door everything is bone dry. thanks for your help.
GE MODEL 5900N10BB. TWO LIGHTS ON FRONT ARE BLINKING-THE HOT START AND NORMAL WASH- DOOR IS OPEN, BLINKING LIGHTS AND PERIODIC SINGLE BEEP. WHEN I CLOSE DOOR, FLASHING CONTINUES, THERE IS A SOUND BUT NO WATER - NOTHING HAPPENING
Hi. I am actually having the exact same problem. Anyones help would be greatly appreciated.\015\012Thank You ... GE GLD5900NWW / GLD5900NBB / GLD5900NCC Dishwasher
My maytag quiet series fills with water and then starts for 5 seconds then stops. This happens 4 times and then the entire system just stops. To help troubleshoot I used a screw driver to trigger the closed door so that I could leave the door open when the cycle starts and the pumps seems to be working and water sprays all over the place. I also took apart the impellar blade to make sure there was nothing jammed and everything is clean. Maytag MDB7500AWW
... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher
Bosch Shu43C02UC dishwasher fills with water but the washing won't start. As the filling nears complete, a double clicking noise occurs to start the washing motor but nothing happens. The time continues to countdown but the machine is silent. When I open and close the door, the click click noise is heard but the machine is silent. I can cancel the cycle and drain the water but none of the washing or rinse cycles will activate but the timer works. The soap door even opens if the timer is left to
Have you checked the inlet water temperature is at the correct level for the dishwasher.\015\012\015\012Please provide the full model no. of your dishwasher -- Shu43C02UC /??\015\012\015\012I think the problem is linked to th ... Bosch 24 in. SHU43 Built-in Dishwasher