Having problems with your Dishwashers ?

My GE 24 in Profile PDW8280JSS door wont open: Now the "clean" light is on. I tried cutting power for over an hour, I have run wash cycles, the lock handle will not move. The unit did not have much in it, when I last closed it, so I don't think it is jammed. Any ideas?


Answers :

Hello & Welcome to FixYa

Flashing clean light is reset by pressing two buttons in sequence 3-4 times, to reset your dishwasher press these buttons in sequence:

High temp wash-heated dry-high temp wash-heated dry

Please get back to me if you have any other questions.

Kevin
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My GE 24 in Profile PDW8280JSS door wont open: Now the "clean" light is on. I tried cutting power for over an hour, I have run wash cycles, the lock handle will not move. The unit did not have much in it, when I last closed it, so I don't think it is jammed. Any ideas?


Hello & Welcome to FixYaFlashing clean light is reset by pressing two buttons in sequence 3-4 times, to reset your dishwasher press these buttons in sequence: ... Dishwashers

Handle on bosch she66c02uc is locked, there is a small orange thing sticking out under the handle that didn't used to be there. if I move it to the right, the door opens reluctantly. how do I get rid of the orange thing and get the door to open easily again?


... Bosch 24 in. SHU53 Built-in Dishwasher

Came home and dishwasher was stil running from the morning. Opened the door and all the lights on the control panel were lit up and unresponsive. cut power to unit for 1 min and now the controls don;t light or respond to anything . They are not locked and there is power to the unit any ideas ?


Hi\015\012\015\012\015\012Thanks for using FixYa. From what you have described it seems that the control panel has gone bad and needs to be replaced however, if you want more information then please do revert with the manufac ... Dishwashers

The handle on my Sistema Tr2 1650psi pressure washer wont lock into place and keeps coming off when I move it.


... Pressure Washers

We have just moved into this unit fitted with a MIDEA WQP12 - 9011B dishwasher with NO MANUAL. What can we do ? We have been using the dishwasher by turning the operating KNOB to a position and pushing in the POWER KNOB. The machine then goes through a cycle of 80 to 100 minutes but without an USER OPERATING MANUAL, we have no idea of whether the dishwasher is being operated correctly.


... Dishwashers

Coleman Powermate pressure washer. Model PW0751310 A lot of water leaks out in the handle where you squeeze for the unit to work, thus the power spray is weak at best. Took handle/arm apart and didn't see any issues. Possible "O" ring worn out (if i was looking at "O" ring. Any ideas?


There may be orings in gun but usually not available as a repair kit. Replace the gun with a 5000 to 6000 psi. You will get a much longer life by over sizing gun. If you like to tinker, you can by orings at Lowes in the plumbing department. Lube th ... Caterpillar Cat Pump Pressure Washer Pump 3SP30G11

I am an Australian who has bought a second hand Defy Dishmaid dishwasher from a South African work mate. It is a 2/3 year old machine that he bought over from South Africa. When he moved into a new house the machine did not fit his kitchen bench opening much to his frustration so he sold it. When placed in my kitchen it was a tight fit and upon recent inspection the floor pan of the unit, it may have buckled. It worked well until recently when we did some renovations when I needed to remove


Hi\015\012\015\012This means that the dishwasher is unable to drain water completely, you can run your washer at\015\012its hottest temperature setting with 3 cups of vinegar inside the unit. After\015\012this take off ... Dishwashers

The door won't close. The latch seems jammed. I have tried setting and releasing the child lock inside the handle. The problem seems to be with the latch itself. From inside the door, I can see the tongue the clips into the latch, but it seems stuck. I can't get it to move, even with gentle force.


... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

I have a Jenn Air JDB 4000 AWB that is seven years old. I have had several problems with this unit during that time. Yesterday when I tried to open the door the "push handle" stuck in the depressed position inside the front door panel and will not release. The front door is locked shut. I have not tried to force anything (yet). How can I get the door open?


... Jenn-Air Dishwashers

Bosch dishwasher, Model SMU 7056, UC 09, FD 7309. My older unit has operated flawlessly for years. Two days ago it started to "stall" in one cycle and not progress to the next, e.g., stayed in the wash cycle and would not move on to rinse. In addition the heat generated in the machine was way below normal. A repairman told me that if the water doesn't get hot enough, the unit will not move on to the next cycle. I always use the "Regular Wash" option, but tried other options such as 'Economy


... Bosch Dishwashers

Top arm does not turn in most of gibson amana an frigidaire this is done by ball in bottom of pump .it is clean.spray arm are clean .bottom arm move all the time.timer works it hesitates every so often and so ball will move an water should go up to upper arm but doesnt.common problem on these units but dont know how to cure?change ball.didnt work..on one unit changed pump cure problem for 4 months then returned....also does anyone know were u can buy the plastic they used to sell for dishwashers


Can yo give me the make and model number sol I can look at the service manual for you? ... Dishwashers

I have a craftsman Pressure washer Model 580-725400 the unit has ran great until today. I last used the unit 1 week ago with no problems but now I have to run the machine almost full choke to get it it rev up and run smooth. The engine oil is clean and filled to the proper point. The spark plug is new and gapped proper. The air filter is new also. And the gas is 97 Oct and fresh. When it choke it to crank the engione I move the choen to run and the engine struggles to run. When I move the choke


... Craftsman Pressure Washers

Frigidare dishwasher model gld355rfb2 when you select a wash cycle unit begins prewash when it moves to wash unit quits and pf (power failure )is on display unit is full of water on bottom of unit so I reset the unit hit cancel button at which time unit pumps off water . I then tried again with same results as above.


... General Electric GDWT160RSS 24 in Builtin Dishwasher

We used our LG diswasher to clean our grill grates, which was a bad idea, because now the unit will not clean the dishes. We cleared the washer arms of debris, but the unit still is leaving the dishes on both racks dirty and is leaving the liquid soap dispensed into the unit undissolved on the door of the unit. There are no kinks in the water inlet, and water is getting into the unit, but the dishes are not getting cleaned.


Hi\015\012\015\012\015\012Thanks for using FixYa. Please make sure the dishes are loaded properly or\015\012dishwasher is not overloaded. Also check that the dishwasher is filling\015\012properly. It will fill with water up to ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Hotpoint Model HDA 3500N 10 BB Unit is only about a year old. The dial does not move. I noticed it when the washer was on for more than 3 hours and saw that the dial was still in the middle of the wash cycle. I then turned it to the rince cycle which operated there (not moving) until I manually moved it to dry. Did not move from there either. Thank you for any help you can give me.


HiThanks for using FixYa. From what you have described it seems to be an issue with the timer that has gone bad, they don’t often fail but if everything else is working fine then it is the Timer ... Hotpoint Dishwashers

Kitchen circut was accidently turned off. Now whirlpool gold disher will not work(unit was not running and the door was not closed all the way when circuit was turned off, All circuit breakers are on) There are no lights on display when door is closed completely, and it appears to have no power. Worked fine prior, what could it be? The unit has not been removed from under the counter yet. Is there a fuse or circuit breaker on the unit? If so where is it located? Other troubleshooting ideas


Hello- Turn power off. Remove kick panel and cover for power wires. Check connections. If these are ok, most likely suspect is a fuse at the control. This is a little harder to get to. Remove inside door panel screws. Unplug wires and remove panel. F ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

I have a Kenmore dishwasher Mod. 66513743 there is power to the unit - but the unit does not work (no lights, etc...) I have pressed the reset button, turned power off and back on to unit - but still nothing --- any ideas?


... Kenmore 13742 / 13744 / 13749 Built-in Dishwasher

My unit used to send steam out of the top but no longer gets hot. I'm sure the coil should be replaced. This unit was pricey and is used every 7-10 days over the last 14 or so months. My last unit lasted 15 years. How difficult is it to change the heating coil? How much is the suggested retail price?


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers...Dishwasher Problems The Heating Element not W ... Whirlpool GU2400XTP Built-in Dishwasher

The timer dial on the dishwasher moves to about the 6 o'clock point and does not move from there. There is clicking noise, and I can nudge the dial and it will move. I removed the t-stat (there was a white substance between it and the door - what is that?), but don't know how to check it. Am I checking for continuity? Thanks much, Roger


... Bosch 24 in. SHU30 Built-in Dishwasher

Odd operation Unit turns on, slowly heats up. When wash cycle starts, temp drops 20 degrees. Unit never seems to drain completely. when cycle finishes, Booster heater temp can drop as much as 40 deg (122F) Heater slowly recovers, but unit never seems to go into rinse cycle.


This unit is a sanitizer, not a full fledged dishwasher. It is designed for restaurants and bars where the primary use is washing glassware. The behavior you describe is normal for this model. The manual can be found at the following link: ... Hobart 24 in. LXIH-3 Built-in Dishwasher

I have a kitchen aid dishwasher model kuds01dlsp3. The unit has no power. A repairman found that the power to the unit was fine and then said we needed a new circuit board. The charge would be approx 270. When I look at prices the whole assembly unit cost 179. wouldn't replacing the electronic component be much cheaper?


Hi\015\012\015\012\015\012\015\012\015\012\015\012Thanks for using FixYa. First\015\012thing is to verify that power is available at the power board of the\015\012dishwasher. Open the power board cover and check if the breaker is tr ... Whirlpool Dishwashers

We have a 100% failure rate on multiple parts on two Maytag dishwasher units and no longer can get replacement parts from anyone. Any ideas of what to do? Here is the latest summary we sent to Maytag: Thank you for the help last fall. As a follow-up, we are still having very bad results with your product. You authorized replacement of the unit which was done. After one dishwashing, THE NEW UNIT SHOWED THE SAME PROBLEM (WOULD NOT TURN ON). I called in and you referred us to a senior te


Well iam sorry to here of you major problems.if the control board has been replaced several times and no luck fixing it there may be a problem with the main power supplied to the unit,as well as having a problem with the wiring harness.usually a manu ... Maytag 24 in. MDBH940AW Built-in Dishwasher

Lock Control I don't have a manual for my dishwasher. The Lock button is on (top of dishwasher). I have pushed that top button for 3 seconds. The button on the top and the "L" then both blink. The button on the top then stays on and the "L" light goes off. Since I can't get the lock light to go off - - my dishwasher won't tun on. Thank you very much.


First try unplugging the washer from powerpoint for 30secs..this may disable lock.if not, some washers will still work on lock if you hold the buttons you need. for 5seconds. eg try starting washer as normal but hold the button for 5secs....(Ps you m ... Jenn-Air 24 in. JDB1050AW Free-standing Dishwasher

My 20 year old dishwaher just broke its lock. Somehow it seized when I locked the door. My husband took it out but we still cannot open its door and take out the dishes. The handle fell out when he tried to open it. How can we access to open it?


YOU HAVE ELIMINATED THE EASY WAYS, ARE YOU PLANNING ON REPLACING IT OR REPAIR, IF REPAIR CALL A TECH. IF REPLACE, THE LOCK MECHANISM IS AT THE TOP CENTER OF BODY. ACCESS WOULD REQUIRE REMOVAL OF D/W, AND ASSOCIATED CLEAN UP OF THE WATER LEFT. JUST RE ... Dishwashers

We have a bosch she4am dishwasher and just recently the unit doesn't rinse all the soap out of the glasses of the top rack and also a film is being left on the dishes. i have checked the top spinner and it works fine, cleaned out the drain, only use recommended soap tablets and use jet dry. we recently put in new counter tops but i didn't move the unit itseld only the drain- would this have any effect?please help


Check the top of the cabinet after the unit has started to wash the water droplets is the key. if you see water droplets on the very top all over then the unit circulation pump is working. If that checks out then check the jet dry compartment. here ... Bosch SHE4AM06UC 24 in. Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0979 seconds