Having problems with your Dishwashers ?

I am replacing the drain hose on my LG Dishwasher LDS5811BB. The new hose they gave me has an additional piece connected onto the hose. I don't know what it is or what it is for. The original drain hose was composed soley of a gray hose with the to end connectectors. This new hose is similar with an additional white, hard plastic, U-shaped hose with a black hose extending off the end of the U-shaped end. Is this an air gap extension, and if so, what do I connect it to or can I cap it off?


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am replacing the drain hose on my LG Dishwasher LDS5811BB. The new hose they gave me has an additional piece connected onto the hose. I don't know what it is or what it is for. The original drain hose was composed soley of a gray hose with the to end connectectors. This new hose is similar with an additional white, hard plastic, U-shaped hose with a black hose extending off the end of the U-shaped end. Is this an air gap extension, and if so, what do I connect it to or can I cap it off?


... Dishwashers

I have a LDF9810ST that I'm trying to replace a broken drain line. The old part number is AEM39700301 and the new part number is AEM69493803. The new part is made with a plastic u-shape plastic piece with a black hose that comes off the top of the u-shape plastic. Where does the black hose go?


Hey Glenn. Did you ever figure it out? I am about to replace my mother's hose since it cracked and I am looking at the service manual -but am I little stumped. I don't have the dishwasher in front of me with the part so I can't explore the options. ... LG LDF9810ST Built-in Dishwasher

The disk washer doesn't drain at the end of the rinse cycle. There is a humming sound but no water is forced through the hose to the sink/garbabe disposal. At the end of the wash, there is a large amount of dirty water in the bottom of the washer. I removed the spray arms, the spray arm holder and the screen and then removed the water, and found a couple of pieces of plastic. But I don't see how I can remove additional parts from the washer bottom. What could the problem be? Is there a fi


Is the dishwasher drain hooked to the garbage disposer? If so is it new? If so did you knockout the plug in the disposer? If so then you either have something clogging the drain or pump. Or the pump motor is bad. ... Dishwashers

My G832SC is not draining at the end of the cycle. It runs the entire cycle, and the dishes appear to be clean. The soap dispenser has opened and the dishes are rinsed. However, the dry cycle doesn't run because the machine doesn't drain at the end. The intake/drain light is flashing. If I reset the machine and start a new cycle, it will perform an initial drain and the water level does go down. We checked the tri-filter and the valve pump thing, rinsed both. Checked the hose under the sink. We


... Miele Slimline G832SCi Built-in Dishwasher

Hi: I have reviewed the forums and tried to fix this issue. Have a Miele G2120 dishwasher that at the end of the cycle - the three (rinsing, drying and end) orange lights begin blinking in harmony. I have removed the triple filter, and two plastic parts to the impeller and made sure all was free of obstruction. I then pulled it out removed the drain hose from in-sinkerator; removed the water line and checked for obstruction. When it gets into this condition - the majority of water drain


Hi The issue seems to be with the float switch assembly that is bad and should be replaced. Float assembly is found inside the dishwasher's tub, on the bottom. The water that ... Miele Inspira Series Dishwasher w/ 6 Programs and 5 Temperatures - G2120 / G2120BL - Blac 24 in. Built-in Dishwasher

During installation of new dishwasher when I was attaching drain hose to pump I saw a small red rubber fap attached to end of pump discharge nozzle. Is this a backflow prevention or something to keep


It is a back flow preventer. Leave it alone and attach the drain hose. ... GE Profile PDW8400J Built-in Dishwasher

Sounds like it is working hard @ start-up. Will not drain at the end on complete cycle. Requires additional attempt to drain. Dishes seem less clean since this problem started.


... Hotpoint 24 in. HDA3700G Built-in Dishwasher

Dishwasher Leaking Dishwasher leaks from underneath the right front side of appliance. Can't tell exactly where it's leaking from, because of plastic guard/support on underside. All of the connections and hoses are in good shape. I'm assuming that it has something to do with the draining process, as it will leak 2-3 times during a wash cycle. Sometimes it's very little water and sometimes it's as much as a gallon.


Hi there, dishwasher leaking might be due to either of these causes, check these:Main tub sealNote… If the main motor of your dishwasher is mounted vertically, beneath the center bottom of the dishwasher, the foll ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Water pours out the other end of the pump opposite the pressure hose connection. It has a clear plastic cap with a small **** in it. Looks like water should escape here but way too much water being pumped out.


... Pressure Washers

The drain hose is off and i can't find out where it is supposed to connect. There is a white plastic piece on the end of it that looks like it broke off and I can.t find the spot it came out of ...The machine is a built in Kenmore Ultdra wash 11. #1565590 could you tell me where it is located on the machine/


... Kenmore 24 in. 15654 Built-in Dishwasher

I have an Ariston LS245 dishwasher, have just had the pump replaced, as it had shorted out, due to water in the bottom tray where the water detection float is, also a new drain hose fitted. Have just run a wash and after running a while, presumably to the end of the rinse, wash and dry cycle, then one of the cycle phase lights, the one for 'soak' blinks constantly. I switched the machine off and had a look to see if a wash had been done, the dishes look clean. In the book it says that if one


... Ariston Technologies Dishwashers

I can not get the water to drain during a normal wash cyclr. When I press the start/restart button twice it makes noise but no water comes out the end of the drain hose. I have put a shop vac on the end of the hose and can get water out that way but it appears not to be pumping. The washer sits for up to 6 months at a time without being used. Thanks for any help Ted Berry Placencia, Belize Central America


Teddy,\015\012\015\012Buy a new one...then go fishin!\015\012\015\012Richard Vantine (ret'd Colonel...USAF) \015\012Bingelrade, The Netherlands ... GE GSD5310D Dishwasher

I have a broken plastic inlet valve for the water supply. It has standard female hose threads on one end and the same thread as the pressure hose has on the other end where can I find a replacement? It has a horizontal, black plastic case and is approximately 16 years old.


May I suggest replacing this plastic part for metal parts (parts for 16 year old unit most likely not available) available thru www.pwmall.com or other pressure washer parts houses. ... McCulloch Pressure Washers

Bosch SGS5312GB/12 Dishwasher I had a control board. Worked fine except didn't heat the water. Got it repaired (new PCB). Now the only thing it does is drain. Clicks every 20 secs and carries on draining. Got a new board. Does everything (including heat the water) except it does not drain before, between, or at the end of cycles. It does drain when while filling, and if the flood detection rod is raised manually (also drains if the inlet pipe beyond the pressure sensor is blocked - found


... Bosch Dishwashers

My new Dishwasher Won't Drain, ehat to do? I have a GE model GSD2300N00WW dishwasher. A few days ago we noticed that it isn't draining. This dishwasher came installed in our new doublewide mobile home. There is no disposal, the drain hose isn't clogged, there is no air-gap installed, and the sink drains just fine. I have removed the filter and cleaned it (wasn't really dirty). Does anyone have any ideas?


... Dishwashers

Brand new Samsung dishwasher is not draining. Drain hose is clear. I can siphon the water through the drain hose, the connector under the sink is clear as well. Could it be a defective drain pump? How can I check?


... Samsung Dishwashers

Hotpoint dishwasher machine go's through wash cycle, through to the end, after dry cycle ends there is always 2 inch's of water left in it that doesn't drain out' but some water is added when new cycle is started, then throughout wash cycle whenever water drains it never drains completely, always leaves 2 inches of water before adding more water to begin rinse cycle. what do I need to do?


... Dishwashers

I installed a new bocsh dishwasher and garbage disposal. The water is not draining. I routed the drain hose on the floor rather than looping it up the back of the dishwasher, due the short lenght of drain hose.


If at least one part of the drain hose is not at least 19 inches off of the ground the dishwasher will not drain properly. I would actually put a loop in the drain hose if possible. This will help with draining. ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a JD 3300 psi 1150 Briggs n Stratton pw. It is leaking from the oil cap/ dipstick seemingly from high pressure. The cap dipstick is about 10 inches long, so this is a real squirt goin on. There is no rubber oring or gasket in the cap. I bought it from a pawn shop new, or at least seemed new as the hose and tips were still factory wrapped. Any ideas?


Either there is compression from cylinder getting into crankcase pushing the oil out or the oil level is too high. ... Briggs & Stratton Pressure Washers

Kitchen Aid dishwasher Model# KUDP01FLSS. 2 problems #1 Won't run unless you press in on the door and hold it for a few minutes then it runs through cycle normally. Problem #2 It won't drain water out at the end of the cycle when I open the door there is water laying in the bottom of the tub. I have checked the drain hose for clogging and it appears normal. I am able to remove the hose from the disposal and suck the water out of the tub using a shop vac this indicates to me that the drain is ope


... Dishwashers

I need the steps to change the hose assembly on my Whirlpool portable dishwasher. When I got it someone had cut the sink connections off so my son connected it to the water and drain with my washing machine which was in the kitchen. However, I have moved and want to use it as portable. I purchased the new hose assembly for the sink faucet, I just need instructions on how to take the dishwasher apart and connect the new hoses.....HELP PLEASE!


... Whirlpool 24 in. Portable Dishwasher Dishwasher

I own a build-in LG Stainless Dishwasher (modle: LDF1178ST). It stopped draining water during its recent startup due to its idle (no operation) for about a year:). I can only feel the hose full of water by touching the drain hose between the washer and the sink desposal. It's hard to check other part of dish washer since it's built in our cabinet. Could any dishwasher expert help to advise how to trouble shoot or fix this problem. Thanks, Alex Chen 571-220-7484


There is a float in the bottom of the dishwasher that tell the motor to turn on and pump out the water. I would check the float first to see if it is hung up and not raising to tell the dishwasher that there is water in the base. Check the check valv ... LG Dishwashers

We moved to a new house with or GE EDW6000. The dishwasher wont drain all the way. about 3-4 gallons left in bottom. The new house has an air gap under the sink that is lower than drain hose Could this be causing the problem.


I had the same problem with mine .turned out to be the pump drain not the pump itself .there was glass stuck in the little propellors.once i removed the glass it worked fine ... Maytag Dishwasher

My Miele G2430 dishwasher stops right after draining in the first minute or so after starting, and the intake and drain light comes on. The solenoid at the end of the intake hose then clicks and the light begins to flash. I applied suction to the intake hose to determine if the solenoid is working, and the valve does open and close. There has been no error code displayed. I cleaned all of the parts and filters referred to in the owner manual.


For a drainage fault heres what the miele service manual says for your machine\015\012Water present in appliance and is not being drained off. The display shows Drain fault F11. The buzzer is activated for 2 minutes. ... Miele Optima G2430SCi Stainless Steel Built-in Dishwasher

Water will dot drain, washer overflows and leaks. new drain hose and new garbage disposal was installed.


Did you knock out the plug where the dishwasher drain hose connects to the disposal. If you did not that is the problem. Plumbers will even forget the plug every once in a while. In side the spot that the hose connects to the disposal there is a plug ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1440 seconds