Having problems with your Dishwashers ?

I just received a replacement door seal for a Frigidaire dishwasher, model # MDR251RER0 Do I need to cut the seal to fit? It appears to be a few inched too long.


Answers :

No let the extra over hang evenly on both sides.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just received a replacement door seal for a Frigidaire dishwasher, model # MDR251RER0 Do I need to cut the seal to fit? It appears to be a few inched too long.


No let the extra over hang evenly on both sides. ... Dishwashers

I have a Dishlex Global 450 dishwasher and have a faulty seal to replace. The original door seal had a foot on each side and the replacement I received has 45 degree cuts and no foot. Also the bottom seal replacement appears to be a screw-in type where the original was slipped behind a fold in the door. I have been assured by the supplier that I have received the correct replacement parts. Could you confirm the these parts are in fact correct and if they are which way should the seal lip an


Hello Tony. I am as concerned as you are that this is not the correct replacement part. The key to getting the right part is the model number which is on your machine, if you know where to look. Do this, go to this link to properly locate your mod ... Dishwashers

Window leasking the inner window of my dishwasher is leaking, the seals may need replacing, or a new window, the inner window has come off,we tried to silicone seal it, but it didnt help for long, can i possibaly get replacement parts?


This is the 800 # for replacement parts. You can call them and they will email you a complete break down of parts and you can order right from them over the phone. ---------800-263-2629 ... Danby 22 in. DDW399 Free-standing Dishwasher

Brand new frigidaire PLD 285-5RFC1 dishwasher. There is a leak coming from the lower right. Supply line was replaced as we found a tiny defect in the flexible hose. It appears that the leak is from the door seal. Your help is needed! ASAP!


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Swan sdw7020w The seal keeps coming off, and I have found 2 pieces of black plastic around 4 inches long in the bottom of the dishwasher which I assume have fell off, can you tell me where these are from


... Dishwashers

The upper spray arm on our dishwasher has become detached from the back of the machine, and there is no obvious means of reattaching it. Are there some clips perhaps that have snapped on the part which attaches to the back wall of the d/washer (part number PP-TD20 - it's a 4 by 1 1/2 inch long rectangular shape with rounded ends) or does this piece somehow need to be taken apart (how - i can't see how i might do this?) and the transparent 2nd layer underneath get attached first? Thanks, Sarah.


What exactly the brand / model of your unit.?Let me know.Thanks ... Dishwashers

I lost a tine to a plastic fork in the dish washer a maytag legacy series quite 300 will it hurt or do I need to take it apart to find it? it was about an inch long and a round tooth in diameter. thank you tony


It's long gone by the next wash load, if it isn't still in the main wash tub area (look around the bottom for it). Otherwise it went down into the pump and got chewed up by the disposer blade and ground up and discharged out the drain line.\015 ... Maytag Dishwashers

My dishwasher is leaking from underneath, front left as you look at it. If i go underneath it, there appears to be a seal on the outside (it does not appear to be the one that runs along the bottom of the inside of the dishwasher) that has come away at one point. Do you know a) how to get the front panel off (the bit that makes it look built in),b) how can i get another one of these seals. I assume if i get one we can just fit it into place. Many thanks, Robyn J


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\012\012p80897 ... Neff 24 in. S5453X1 Built-in Dishwasher

Karcher k2400hh pressure washer, water pressure cuts out.


Hello cikanek:\015\012\015\012Try this:\015\012\015\012From your posting, I assume you have removed the splash cap and the nylon bypass valve cover. Connect the water supply to the pump and connect the high pressure hose and w ... Honda Karcher G2400HH-R Pressure Washer

I have a Bosch SGI4005 AU/12 dishwasher that needs a new door seal, is this a common seal, or is it a seal for this model only? can I use any other type of seal? regards Peter


... Bosch Dishwashers

The lid of the top drawer leaks. I've examined the seal and it appears sound. Water is on the top edge of the drawer.


... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Door seal Hi i have just brought a new seal for the bottom of the door but it has a peice cut out of the seal about 8inches from the end is this correct the door does not seam to have any thing that would fit in this missing peice if it is correct which way would the shortest edge face


Generally the notched out section fits around latch hope this helps ... Dishwashers

My kr2020 washer keeps cutting out .the unit appears to get overheated and cuts. after about 10minutes it will start up again for a while before cutting out again


... Karcher K 3.98 M Electric Pressure Washer

I have a Neff built-in dishwasher and sometimes there is a heavy leakage of water from the front right-hand side. The unit is 3-years old and there is a build up of scale around the rubber seals. The long seal at the bottom of the door seems to have receded slightly behind the metal panel on the inside of the front door. Is the seal easy to replace ?


Hello,\015\012Check the rubber seal in the bottom of the door has not perished or split,also check the bottom spray arm has not split on the ends as this will direct the spray directly onto the door,causing it to leak.\015\012\015\0 ... Neff 24 in. S5443X2 Built-in Dishwasher

I have a fisher & Pakel dishwasher and it appears to have brown a fuse inside the machine which means it does not work at all and the problem occurred during the wash cycle. This means the seal (which is a top piece that's lifted and lowered by two motors. When the seal is in the lowered position it creates a complete seal but it also locks the drawer (single drawer dishwasher) so it cannot be pulled out. I repaired the dishwasher two years ago. One of the lifter motors didn't work. I replaced t


According to the service manual there is no problem in manually forcing open the drawer in the situation where the power has failed part way through the diswasher cycle.\015\012\015\012The problem is that once you force the lid open, you ... Fisher and Paykel Dishwashers

Door seals for dishwasher lds5811bb it is leaking water and all I want is a diagram of parts so that I can order the right ones. I need the tub seal and the door seal.


Hi,\012That is not that hard to fix and you can easily buy the parts yourselfonline...Here is a tip that will help you with the online buying...How to Buy ... LG 24 in. LDS 5811 Built-in Dishwasher

Bathtubs was not listed in the "pick an expert" list, so choose dishwashers as closest thing to a bathtub. I have a whirlpool bath tub (don't know the make, but it is only 4 years old) It works fine but have a question - near the top of the bathtub there is a screaw in cap type of thing. It is a disk with a threaded bit on the back. The disk is about 1-1/4 inches in diameter and the threaded bit on the back is about 1/2 inch diameter and 1 inch long. Is this for allowing extra air into the syste


This would be a plumming issue. i do not know the answer you are looking for ... Dishwashers

Viking professional dishwasher DFUD142 panel lights flashing, and cannot turn of pump, need to cut power, will not go on? worked perfectly 4 yrs. what to do? repair man did not fix.


... Viking DFUD142 Built-in Dishwasher

I will be closing our house for the next 6 months. do i need to do anything special to seals? i understand the line draing,but have heard you nee to use mineral oil for seals. this does not make sense unit is in flordia


NO, YOU DON'T NEED TO PUT ANYTHING ON THE DOOR SEALS, HOWEVER, IF YOU KEEP THEM CLEAN OF SOAP AND FOOD FILM, THEY WILL LAST LONGER AND BE LESS LIKELY TO LEAK. IF YOU ARE GOING TO BE GONE FOR A LONG PERIOD OF TIME, YOU COULD PUT A QUART OF WATER IN TH ... Dishwashers

The dishwasher is not cleaning the dishes at all, so far I have done the following: Checked both sprayer arms and they move freely and do not appear to be clogged (I ran stiff wire thru holes in each The float is not stuck and moves up/down easily The water leavel in bottom of tub does appear to be low - so I added water filiing tub to heating coil - however this did not help and the water did not spray on lower or upper racks - this is an older model Kenmore Ultra Wash WHAT DO I NEED TO CHECK N


Heating element may have burned out. Check water temp during wash--should read between 130 to 140 F.If not the heating element,you may have to replace pump-motor assembly or wash impeller.Hope this helps. ... Kenmore Dishwashers

KitchenAid KUDP01DLBS2 dishwasher. Runs for a very long time on any cycle; time does not seem to advance. (takes 2.5 hours or more for normal cycle. "sensing soak", "water heating" lights on for a long time, even though it appears that water is not being heated. Checked incoming water temp, is hot. Did not do this when new, something has changed. Typical cycle was 1 hr 10 min. before.


Sounds like the heater inside the dishwasher is not working. The machine is trying to get the water up to a preset temperature, probably in the neighborhood of 140 degrees. That is one of the things that it is sensing.After the machine fi ... Dishwashers

Hi there,i have a brand new but 3 year old,diplomat 8332,just fitted it,it does the pre was ok,pumps out the water,goes to next stage,you can hear water entering the machine,shortly after it has started the main wash,it starts to cut out intermittantly,then F2 code appears,and a bleep.i have taken the lower panel off and checked for leaks and to see if the valve was free,all ok,also relay click in front panel,safety cut out ? any ideas please.


... Dishwashers

I have a kenmore Ultra Wash Dishwasher, Model 15825691. We were recently hit by lighting. Once hit, the dishwasher started up. Since then, all cycles work, however, at the end of any cycle, the dishwasher continues to run and fill the bottom of the washer up to about two inches and then cuts off, so when we open the washer, there is approx 2 inches of water inside no matter what. I have pressed the "Cancel/Drain" button, in which drains the water after two minutes, but when that is finished, the


There must be a problem wit the fill valve. Check which valve the water enters. Check first the wiring to the valve of the water inlet or where the water comes out to fill the washer. Check for physical evidence of damage on the solenoid (or contr ... Kenmore 24 in. 16539 Built-in Dishwasher

Dishwasher seal My dog chewed the seal on my dishwasher door. I need a new one.


What model #...you will need this to get the exact part..You can find them on a label on the tub wall just inside the door.Here is a GE gasket part number from a site I will provide a link toItem #\015 ... GE Nautilus 24" Built-in Dishwasher

Leaking dishwasher leaks intermittently. I removed the side panels and there is no sign of water in the base of machine. Door seal seams to be intact. What else can I check. Seal that needs replacing? Machine is 18 months old. seams to leak on the right side of the machine. Please advise. many thanks.


There are screws on the inside of the door on a lot of those\015\012try to tighten them down a little sometimes that can cause a leak. ... LG 24 in. LD-12BW5 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0641 seconds