Having problems with your Dishwashers ?

TEKA Dishwasher TDW 59.2 FI Error lights Light 1 = off Light 2 = on Light 3 = off Light 4 = on Light 5 = flashing


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

TEKA Dishwasher TDW 59.2 FI Error lights Light 1 = off Light 2 = on Light 3 = off Light 4 = on Light 5 = flashing


... Dishwashers

I had a black out and the dishwasher was running at the time. The dishwasher emptied out all over the floor. when the power came back on the dishwasher was flashing an error code 4. I rang Whirlpool for assistance and they said it was over full but it was totally empty. We turned the dishwasher off at the wall hoping it would reset but it is still saying error code 4. Can you suggest something else we can do?


The trouble looks to be little confusing. Whenever the power failsduring mid cycle this happens. Try running the balance cycle. Since you say the water is fully drained, try adding water manually tothe wash chamber to certain ... Whirlpool Dishwashers

Miele Optima Series 2470 Dishwasher sounds a beeping sound and flashes a F19 error on the control panel. Last week the beeping sounded and flashed a F13 error on the control panel. I looked in the manual and it said to clean the filter, which I did and put it back in place and locked it. Now the beeps sound and it is now showing a F19 error on the control panel. Help!!


... Dishwashers

Hi I have a LG LD-2052 dishwasher. It gives me an E 0 error - the water does not pump out when I open the machine after a few minutes when started to wash and message of E 0 appears? Have cleaned an


... LG Dishwashers

I have a Frigidaire Series PLD2855RFC3 dishwasher. Near the end of the cycle the dishwasher stops and begins flashing "PF" on the display and the lights for "Hi Temp. Wash" and "No Heat Dry" also flash. I know "PF" = Power Failure, but the power never goes out... so what is causing this error and disruption in the cycle?


... Dishwashers

The dishwasher is flashing error 20. The wash cycle begins to work but after a few minutes the wash cycle will stop and the light flashes on the program selected. We have tried turning the dishwasher off from the switch to no avail. Please advise us on what we can do to fix this.


... AEG 24 in. Favorit 3A Free-standing Dishwasher

Frigidaire PLD4375RFC Dishwasher Dishwasher. Error code PF keeps flashing. I can open and close the door, it goes off. A litle later it starts flashing again. PF, means power failure


... Frigidaire PLD4375RFC Dishwasher

AEG OKO_FAVORIT 6281i dishwasher - error code 20 (Siphon blocked). Out of the blue after 6 years of reliable once-a-day family use, my AEG OKO_FAVORIT 6281i dishwasher started OK but about 3 minutes into the cycle began flashing error code 20. At which point there was a litre or two of cloudy water sitting at the bottom of the machine. Since then I've tried redirecting the drain hose into a bucket, after disconnecting it from the kitchen drain. Same symptom, and no outflow except what was al


... AEG 23 in. Favorit 50750Vi Built-in Dishwasher

Asko Dishwasher F2 Error Flashing


Hello,\015\012\015\012Attached is a link to a Asko Dishwasher repair video.\015\012\015\012http://www.appliancerepairlesson.com/shop/dishwasher-videos/asko-dishwasher-f2-error/\015\012 ... Asko D1776 Built-in Dishwasher

My asko d3250 thinks the drain hose is blocked. but when i pour water in the dishwasher to see if the water is being drained, the dishwasher is draining properly. Yet the dishwasher after it has drained the water, will shutoff and start flashing the Large Pot icon (drain hose is blocked error code). Is there a sensor that is faulty?


Yes, it sounds like it is to me. I'm not able to pull your model up on my data base,if I could I would be able to tell you where it is located. I would assume that it's located either inside the pump or close to it. Sorry I couldn't be more help. ... Asko Dishwashers

AS PER DIRECTIONS FROM TECH, I PURCHASED AND INSTALLED A NEW CONTROL UNIT. THIS WAS BECAUSE MY WHIRLPOOL DISHWASHER GOLD GU2300XTLB3 QUIT WORKING IN ALL CYCLES EXCEPT SHORT CYCLE. PUT EVERYTHING BACK TOGETHER AND TRIED TO GET THE DIFFERENT CYCLES TO WORK. NOTHING WORKED EXCEPT THE CLEAN LITE FLASHED A CODE 7.(FLASHED 7 TIMES THEN QUIT. THEN IT WOULD FLASHED 7 MORE TIMES THEN QUIT) iT HS BEEN DOING THIS FOR WELL OVER 24 HOURS. WHAT MUST I DO TO GET BY THIS ERROR CODE AND GET IT TO START W


Hi,This is a common problem with Whirlpool washers.If\015\012the clean light is the one flashing then your dishwasher could have a\015\012heater circuit problem (depending on the age) or this could simply just\015\012be water colder ... Dishwashers

Samsung dishwasher flashing error code ce


... Samsung DMT800RHS Dishwasher

HOTPOINT DISHWASHER BFI 620 ERROR CODE LED FLASHING 1 & 3


Check the end of your drain hose for the clog. ... Dishwashers

My dishwasher keeps flashing F1 error message


The f1 code is caused moisture in the electronics part most likely in the door.see if there is any way that you can see where moisture might get in and plug that spot up. In the case of the f1 code when not using the dishwasher leave the door prop ... Fisher Dishwashers

I have an indesit idl 535 dishwasher . lights 1 and 2 rapidly flash and it is full of water. The dishwasher does not work and these error lights keep coming on now. Can you assist ? thanks [email protected]


... Indesit 24 in. IDL500 Built-In Dishwasher

Model GSB6400NDC0 replaced control board, now all lights flashing on LED with error code Er. Buttons flash when held. Dishwasher will not register settings or work at all.


What is the part number you replaced?\015\012It is possibly the wrong one.\015\012\015\012Thanks ... Dishwashers

Hotpoint bf162 built-in dishwasher error code soak programme flashing cannot rest the machine either, what does the flashing mean please?


... Hotpoint 23 in. BFI62 Built-in Dishwasher

Have a frigidaire dishwasher (model- PLD4375RFC0)about 2 years old. Set to run as we left to go out of town- when we came back all lights flashing including error- found a child's plastic bowl that had fallen to the bottom and had a melted spot as it was next to the heating element. Called support and were told to master restart- shut the power off for 15 minutes. Did and now flashing "27". Cannot find a code for that and neither could support without sending out a repairman. Any advice before


... Frigidaire Dishwashers

I have a DWI 612C Smeg dishwasher I have an error code of the 2 right hand LED's flashing Have tried to reset the programmer (turn off, on then press program 4 times in 2 secs, wait 15 secs and turn off) This enables me to select a programme, but when the programme starts, after five mins it beeps and carries on making the draining pump noise and the programme never starts When I turn it off and back on I get the far 2 red lights flashing again Have looked for signs of blockages and can


... Smeg 24 in. DWI612 Built-in Dishwasher

I have an Miele Optima Series HG03 dishwasher. The dishwasher stops after a minute and the intkae/drain error flashes. I tried everything in the manaual but there is nothing blocking the drain or intake hose as far as I can tell. Any suggestions of what I should try next?


Hi,\015\012\015\012try checking the spigot under the sink as quite often the hole has not been opened up enough and there is a shoulder for food to jam up against causing a blockage. Remove the drain hose and have a look in the hole of th ... Miele Optima G2470SCVi Built-in Dishwasher

I have a Firdgedaire Electrolux model GLD4355RFB1 DISHWASHER AND an Error message is appearing with flashing lights. The dishwasher will not run. How to I get back up and running? Is it a major issue?


What is the code? ... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Have a hotpoint Dishwasher Model BFI620. The Eco light is flashing an error. Anyone know what this error code means?? Any help would be appreciated, cheers, julia


... Hotpoint 23 in. BFI62 Built-in Dishwasher

Hi, Our Teka TDW 59.2 FI Dishwasher engine not starting.Where do I get an engine in Dublin area? Otherwise it is buy a new dishwasher as per local handyman. Any ideas?


... Dishwashers

At 2 minutes left in the wash cycle, the quick rinse light starts blinking and the timer goes to 0. My dishwasher is a Whirlpool Quiet Partner IV gu1500xtkbo dishwasher. I'm assuming the blinking light is an error code. What does it mean?


... Whirlpool Dishwashers

Hi, i have a hotpoint slimline SDW60 dishwasher that has 2 lights flashing. the fast and delicate lights which means an error but what error and can i fix it myself, can anyone tell me please?


Download the user guide here >> http://kitchen.manualsonline.com/manuals/mfg/hotpoint/hotpoint_dishwasher_product_list.html ... Hotpoint 24 in. FDW60 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2407 seconds