Having problems with your Dishwashers ?

The machine is flashing Er and than 'ur', what does this mean? How can I fix this?


Answers :

ER or ERR is a communication fault between the membrane (touch module) and the electronic control.

The code you are getting is generated when the computer cannot sense the membrane or is getting an incorrect signal.

If you or someone there is trying to resolve this issue yourself, you \015\012can first try disconecting the power and opening up the panel and \015\012cleaning the ribbon connector with a clean eraser- You look for the side\015\012 of the ribbon that has the actual contacts on it - (this will be \015\012obvious to someone that is handy and knows what a ribbon connector is).

Sometimes\015\012 all you need do is clean that ribbon connector and it will work again. \015\012Those models sometimes get steam/moisture in the control panel area and \015\012it causes a film to build up on the connector.

There is what is \015\012called a "matrix" for testing the individual buttons on the \015\012touchpad/membrane. There should be a "techsheet" with that model hidden \015\012behind the door.

It can get exensive to just start switching \015\012parts to see what works. Be aware if you go buy eother of the parts, and\015\012 it does not work, you will not find any parts place that will take the \015\012part back. You buy it, it's yours.

I usually find the membrane is the cuplrit. Cleaning the ribbon works in many cases.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The machine is flashing Er and than 'ur', what does this mean? How can I fix this?


ER or ERR is a communication fault between the membrane (touch module) and the electronic control.The code you are getting is generated when the computer cannot sense the membrane or is getting an incorrect signal.If you or so ... Dishwashers

I have a Hotpoint Aquarius FDW 20 dishwasher. Prewash and Wash lights were flashing, machine had stopped and water was at the bottom of the machine. What does this indicate? After removing some debris from the water drainage pump, then reassembling the machine, I now get the pre-wash LED flashing and a motor operating, but no futher progress into the wash cycle. What does this mean?


Dishwasher always full of water at the end of cycle ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have an LG dishwasher that is about 10 or so years old not long after the wash cycle begins the machine starts a tune and then the letter FE start flashing. the machine continues to wash with the letters flashing. I need to know what the FE stands for and what to do to fix it.


It indicates that the unit is overfilling, usually a valve issue. Go get that looked at, you might get your kitchen and house folded. ... Dishwashers

My smeg dwi 710 dishwasher keeps flashing on the diplay panel and won't change to another wash selection. it wont close and wont start. the light is stuck on the heaviest wash selection and just keeps flashing on and off and on and off. i have tried turning it off, keeping buttons held down and nothing seems to work. there is nothing in the manual that says what the flashing means so i dont know how to fix it.


... Smeg Dishwashers

My problem was eco & prewash lights flashing so I followed instructions on Fix Ya to reset which seemed tomwork machine went through complete sequence but then reverted back to lights flashing aga


Hi, not sure if its relevent but we have a hotpoint aquarius DWF50 machine, light flashed same at times, sometimes push the switches would not operate properly to select a program. Lately the pump for emptying water at the end of a cycle would contin ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

AEG Diswasher Model / Favorit 44080IM PNC 911925601/01 (located in UK) Wash cycle finish light flashes 5 times in sequence then starts again - please advise the meaning of this error signal ? History Machine started running immediately door was closed before any programme selected filled with water and main was motor runs and circulates water Water is not heated and detergent door has not opened Machine will continue to circuluate water until turned off If reset used then


1 blink is machine is having major power supply problem.the power supply board needs replacement.\015\012-----------\015\0122 blink is CCU error.that control board problem.\015\012-----------------\015\0123 blink is the CT error.that is ... Dishwashers

Dishwasher fdw60g fault lights i have the eco and prewash light flashing. i know that this means the filter is blocked. i have cleaned the filters and checked the hoses for blockages and they are all clear and kink free. i have tipped the machine on its side and checked the pump , which is clear aswel. i dont know what to try next to get the machine working and the lights to stop. thanks


... Dishwashers

Hi, I have a whirlpool ADG 7340 dishwasher and it's failing to run a full cycle (it just starts beeping constantly about half way through). The light is flashing 4 times so I guess that means it's fault number 4 but I have no idea what fault 4 means & how it would need to be fixed.


... Whirlpool Dishwashers

My Whirlpool ADP 5406 runs for about a minute and then the light flashes four times, repeatedly. What can I do to fix this? (I can still get the machine to run its cycle by holding down the start button, but the light will flash four times again on completion).


Hi and welcome to FixYa. I am Kelly. \012 Usually this symptom also shows an F7 error code. You will need to remove the lower wash arm (NOTE INSTALLED POSITION) Also you will need to remove the metal grate under the wash arm to ... Dishwashers

Our Asko D1796 dishwasher has all lights flashing and is displaying a F2 message, which according to the good book means there is too much water in the machine. I have followed the instructions for a normal inlet time but the indicators will not change. Is it trying to tell me the Drain Pump is dead? A new drain pump was fitted three years ago. There is no eidence of water in the machine. Can anyone help? Thanks. Alan


Hi Alan,\015\012\015\012The F2 on Asko means it's sensed an overfill, that in itself though can be provoked by a couple of thing's. First, check for blockage at the end of the drain hose where it connect's to your household plumbing, be it under the ... Asko D1796FI Built-in Dishwasher

Hotpoint bf162 built-in dishwasher error code soak programme flashing cannot rest the machine either, what does the flashing mean please?


... Hotpoint 23 in. BFI62 Built-in Dishwasher

My indesit IDL 500 dishwasher has two warning lights flashing (nos 2 & 4) but the manual gives no indication of what this means. Apart from the lights the machine appears to be functioning normally. Any ideas what this means?


... Indesit Dishwashers

Teka DW6 59 FI, 4th light flashing constantly and machine won't do anything. What does this mean?


... Dishwashers

My maytag dishwasher door will not latch shut, and all of the lights keep flashing. What does this mean and how can I fix it? or will I have to buy a new one....?


Hi- Yes, these can be a problem. It is most likely the latch assembly as long as you don't see any obstructions and the racks are going all the way back. Sometimes you can carefully bend the strike (the part that sticks out from the frame) and get ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

ASKO dishwasher D3122 drain pump wont stop pumping and the machine wont respond when we press any of the program or start/stop buttons. the program light is flashing. We can turn the power off with the main switch on top of the door but when turning it back on the pump starts pumping again. please tell me how to fix this problem so we can get it up and running again.


... Asko D3122XLSS Stainless Steel Dishwasher

Hi, i have a hotpoint slimline SDW60 dishwasher that has 2 lights flashing. the fast and delicate lights which means an error but what error and can i fix it myself, can anyone tell me please?


Download the user guide here >> http://kitchen.manualsonline.com/manuals/mfg/hotpoint/hotpoint_dishwasher_product_list.html ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have LG-12AW2 Dishwasher, it starts for 20 seconds and it stops and the light flashing and for about 10 minute later it gives a code IE what that mean and how to fix it


Hi\015\012\015\012The code IE means its a Water inlet trouble. You need to check clogging of water inlet hose (or hose twist or freezing) and also check water supply. If there is clogging you need to clean it so that the issue is resolved ... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

The clean light is flashing on my whirlpool gold and i can no longer start the washer. What does this mean? How can i fix the problem?


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Fisher Paykel Double Drawer DD601v2. Half way thru a cycle the alarm went on both drawers even though the top one was not inuse or switched on. The error on both drawers is F1. If we push the power button on both after a few seconds they both start up making a whirring noise and both drawers flashing. We have to unplug the machine to stop the irritation. What is wrong and how can we mere mortals fix it ?


Hi,The F1 error means that the sensor that is located in the pan at the bottom of the machine has sensed water.It does not want either machine to run with a leak so it will shut down the operation of both drawers. ... Fisher and Paykel Dishwashers

Dishlex 450 Hello, I have a dishlex global 450 and on the screen panel it is flashing NF do you have any idea on how to fix this problem. I understand this means no fill, the water is coming into the side of the dishwasher but not actually entering. Regards Helpless lady!!! Who is sick of washing dishes!


Hello,I had this problem and reset the dishwasher to solve. Turn off dishwasher for at least 20 seconds, turn on while pressing eco button and wait for about 30 seconds. Should hear beeps. ... Frigidaire 24 in. FDB126RB Built-in Dishwasher

The machine is just flashing E24 on the front. What does this mean?


1. Turn it off2. Turn it back on3. Hold the start button for 10 secs4. Let go and you should hear the pump run for 1 min. The unit will reset5. You should be good to go ... Dishwashers

I have a diplomat adp8322. when powered up the start button flashes 3 times but will not start. does anyone know what this means and if so how do I fix it please.


... Whirlpool Dishwashers

Hi, I Have a whirlpool dishwasher ADP 6515 and working fine for the past three years. Just last night, the dishwasher started initially but then stopped as water not draining. Flashing green light. Not sure what it means. Could you please help and tell me how to fix it.


... Dishwashers

I have a Hotpoint Aquarius FDW60, when i start the machine it displays flashing lights after about 15 secs these being Fast 40C and Delicate 50C How do I fix this?


Hi and welcome to FixYa, Initially, the flashing light indicates blockage. Though a messy job, it is relatively easy repair although challenging. Areas to check/clean are:\015\012\015\012fil ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Just installed Hotpoint Dishwasher model LFT 114 uk loaded, program selected tablet in, shut door the machine beeps, then few mins later beebs again. when open the first 2 program lights are flashing. what does this mean but as not washed


I'm having exactly the same problem, was this ever resolved? ... Hotpoint Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0701 seconds