Having problems with your Dishwashers ?

Hello, I have a Fagor Dishwasher 1VF-03SX. Looking at the manual it seems to have an "overflow" problem but doesn't say what to do to fix this. Can you give me any assistance. Thanks.


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hello, I have a Fagor Dishwasher 1VF-03SX. Looking at the manual it seems to have an "overflow" problem but doesn't say what to do to fix this. Can you give me any assistance. Thanks.


... Dishwashers

My elecrolux dishwasher gives me error code 11. What do I do? I have the manual, which says that it timed out before it could establish a drain... but there is no info on how to fix it. The dishwasher is new, but it has run 6 or 7 times with no problems.


... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

We live in an apartment and our hot point dishwashers timing is all off and i thought if i could fix it myself, i'd love to do that instead of calling our manager, i will call him, but if its an easy fix i'd like to try it out.. it will just stop in mid cycle, and you have to manually more it a fraction of an inch to get it restarted, then at the end it doesnt fully drain, and the drying takes forever, so if i cant fix it, i'll ask for a new one..


It might need a new mechanical timer (sounds like the timer is sticking) installed and the parts will cost money... so you might want to go the route of the manager. The dial that you turn to set the dishwasher is part of the mechanical timer. Someti ... Dishwashers

Dishlex global 450 _ how do i fix fill level time fault? displaying oF? Hi There, I have the above dishwasher and saw your advice on fixing fill levels - my display is showing the oF message and the pump to drain remains on whilst mains is connected. turning off mains does not clear message. holding eco button down does not clear message? is there anything else i should do in terms of removing parts to assist the process? I have cleaned out all of the drainage bowl and all is clear. i would pref


... Dishwashers

Hello I am having problems with my dishwasher. Model BFDWC60ss. The detergent compartment doesnt doesnt empty after each wash so the dishes are still dirty after a heavy cycle. I have checked the filters and they seem ok. I would be grateful if you can give me some advice. Much appreciated Mary


... Dishwashers

Bosch Dishwasher SHU42 Stainless Steel Burning smell I had Bosch replace the faulty piece that was part of the recall (it was fine before) I bought two of these the other one is still totally fine NOW the tenant is saying that is smells like its burning.. so they turned it off at the breaker.. Its full of water... now they say its going moldy? UGH. What can be causing the burning smell and how do i fix it please? Thanks


Disconnect the drain hose from under the sink and use a wet dry shop vac to remove the standing water.Then check the main wirng coming to the machine and make sure they are connected properly.there is also an inline fuse located bottom ride side of t ... Bosch 24 in. SHU42L05UC Stainless Steel Built-in Dishwasher

I have a Candy CD650 dishwasher which is not washing properly. Basically, the detergent tablets seem to be getting stuck in the tray. Most times I open the door, the tablet is a pile of mush inside the tray. Other times it is on the bottom of the dishwasher - again a pile of mush! Sometimes, it starts the program & sounds like it's about to start a wash cycle, but then gives up! it gives one short woosh, the stops again. Any ideas how to fix this? I don't have a manual so can't look there.


... Candy 24 in. CD650 Free-standing Dishwasher

Model 110 - 20722990 sur ck 0966307 type 111 - Suddenly on the spin cycle - it started making a high pitch sound - ( should we stop using it immedicately - or can my wife presently keep using it ) - when you open the top cover - it stops - what I want to know if a handy man can fix it ( thats me ) or should I call a appl. person - and the steps to fix it ( also what is your charge - it says as low as 10.00 ( I hate as low as ? )


Hello. That sound is an indication that the transmission is on it's last legs. This is not a repair that a handy man should attempt. In fact, if this machine is more than three years old I would not recommend a repair. You would be better off to ta ... Dishwashers

Kenmore dishwasher My dishwasher stopped in the rinse cycle and no longer appears to be getting power, although the breaker works and the plug it is connected to is still receiving power. Is there a reset button for the motor, or some other idea to try and fix this? Thank you for your assistance. Mark


Mark, you probabley blew the thermal fuse located on the main board. Easy fix. Part number 8269213. You can ohm it out to be sure. You have to remove the inner panel to get at the control board. The fuse sits on the top side and clips on. Two wires ... Kenmore 24 in. 16293 Built-in Dishwasher

We have a Hobart FXS 70N Dishwasher and it gives us a F04 error code. What does it mean and how can it be fixed? Where can we also get a wiring diagram for it? Thanks Engela


... Dishwashers

Dishwasher leaking my GE Natulus dishwasher is leaking from the bottom seal, Is the two pieces that are at the very bottom that hold the motor where the seal is? I'm not seeing a seal. I'm not sure if that is where it is leaking. I've got the thing torn apart so it is difficult for me to say where it is leaking. I'm going to give it a whirl. Don't know if the repair is worth the trouble. The GE dishwasher is only 7 years old. What is the avg life of a dishwasher. I'm sure it's not top of the lin


There is a front door seal that may be the issue. It seals along the door sides/top and continues under the door to seal the bottom surface when closed. Mine pulled out of the seal channel under the open door where you can't see it without a small mi ... GE Nautilus 24" Built-in Dishwasher

I have a brand new Miele dishwasher which has worked grate since it was installed 2 weeks ago. It keeps shutting itself off & indicates an F13 fault. I looked in the manual, see that water is going in fine & pressure is good. It then says to clean water intake filter. How do I get to that ? I don't have a user maintenance manual. I'm on city water & doubt that the filter is clogged but My wife will kill me if I don't get it fixed today. Can anyone help. Glenn


On my Miele 1220 dishwasher, the inlet filter is inside the inlet hose connector, where it screws onto the water supply. To clean it:\015\012\015\0121. Turn off the stopcock.\015\0122. Unscrew the inlet hose.\015\0123. Remove the black rubber s ... Dishwashers

3850DD3006A- i start it and then the timer doesnt change  then and its starts beeping after a couple min. and says LE!!!!!!!!


I HAVE HAD TO CHANGE THE MOTOR $100.00 TWICE IN TWO YEARS FOR THE SAME PROBLEM. THE MOTOR HAS A MAGNETIC? RING THAT SPLITS AND STOPS THE MOTOR FROM SPINNING. TODAY THE DOOR ROPE THAT MAKES THE DOOR NOT SO HEAVY BROKE. IT IS FOUR YEARS OLD TODAY. ... LG Dishwashers

Indesit DE43UK dishwasher. Water only gets lukewarm, intermittently gives Fault code A03 - "thermistor short circuit". Indesit says no such part as thermistor listed for this model. Indesit will not put me through to an engineer to explain this. What now?


INCREASE THE WATER TEMP AT THE HOUSE WATER HEATER SO YOU WILL HAVE 120 DEGREE WATER COMING INTO THE DISHWASHER. IF THE DISHWASHER IS NEXT TO THE SINK, PURGE THE HOT WATER LINE AT THE SINK UNTIL YOU ACTUALLY GET HOT WATER. THEN, START YOUR DISHWASHER. ... Dishwashers

My dish washer has codef2 on it it says flood switch has been activated how do i fix this


1-Unplug power2-Dry out floor first.3-Wait for at least 6 hrs so the sensor has a chance to dry out.4-After that plug in power so you can troubleshoot why there is a leak.5-Most the time the Lid seal went bad after using a whi ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Ldf6920 whistles and chirps the water valve adjustment doesnt fix


Hi,\015\012\015\012This can be 1 or 3 things.\015\012In theis machine your inlet valve is protected by a filter. When the inlet filter is clogged by limescale it will whistle like crazy.\015\012That is one\015\0122 the i ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Hello, We need some assistance with our Kenmore dishwasher. Last night after I started a load, the dishwasher just stopped and then the washing and drying lights started flashing red, sanitized and green are flashing green and the 6 hour delay button is flashing red. I have pushed the start/cancel button but to no avail. My husband shut the power from it to see if it would reboot, it does not help either. It runs a little bit then quits and does not clean the dishes. Could you give us sugg


Hold the start button for 3-4 seconds and see what that does ... Dishwashers

Kenmore Dishwasher Model 665.1622Clean light is flashing, Use and care guide says when this happens the dishwasher has malfunctioned. Call for service. There must be a simple fix?


This happens if the water temp sensor is not seeing a temp rise in a specific time. Make sure you run hot water to sink before using. This problem is often caused by a bad heater. This can be checked from the control board in console. You need to ... Dishwashers

Bosch Dishwasher hi, was thinking of buying a second hand bosch aquasensor dishwasher.. I think the model is Bosch SGS46M78AU.. anyhow thw current owner says it needs 'minor electrical repair to circuit board' and when queried further said that sometimes it washed in normal time and at other times it took up to two hours. Any idea what the prob could be, and would it be costly to fix?? Thanks!


The circut board is very costly stay away from that one ... Dishwashers

The normal light on my Whirlpool DU1101XTPQ7 is blinking. Service company installed a new circuit board but this did not solve the problem. Now they are saying it's the control panel (after the third visit to my home to fix this).


A blinking indicator light means the thouch key that geos with that light is stuck. So yes you need a control panel since the touch pad assembly is installed on it at the factory. I would have them put your old control board in with the new touch pad ... Dishwashers

PrimaLPR600 keeps giving us fault code by flashing 4 times and beeps continuously and doesnt wash properly, we have cleaned the arms but no joy


... Dishwashers

How do i get electrolux to give me a new dishwasher given that the old one is a dud and can burn my house down? I don't just want a 'fix' like last time


Unless a tech can condem your unit, and it is less than a year, you will not have much to stand on. Can you discribe a little bit more on what problem the D\\W is giving you. ... Dishwashers

Sink Help My dishwasher cord doesnt fit tightly on my the end of my sink- how can i fix that without having to get a new faucet?


It should tighten when you turn the water on ? ... Kenmore 17459 Free-standing Dishwasher

Shu5306uc/12 This is the model I have and when I turn it on all it says is F, It doesnt go to the time can you help me?


This could be either two things, either the water is not turned on or you may have an airlock in the hose or the hose is squashed, or it could be a heater problem, check with a meter to see that its not open circuite or earthing out. Make sure you tu ... Bosch 24 in. SHU5305UC Built-in Dishwasher

Flood switch This DW is a Kitchen Aid version of a Fisher & Paykel. Both drawer rinse lights stay on, the drain pump stays on. Book says the flood switch is activated. Is this somthing that a homeowner can fix or am I required to call for service?


I had the same problem and I fixed mine. It wasn't hard at all. First, make sure power is off either unplug or shut off breaker. Next, open the lower drawer and on the sides toward the bottom you will see a circular recessed pin with a flat slot. Wit ... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0683 seconds