Having problems with your Dishwashers ?

I have a candy cdi 1022 and since new it has not used any of the salt up and dishes and cups and cutlery frequently have to go back in for another go. Also only drys on the hottest setting? Any tips on what I could try to fix this?


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a candy cdi 1022 and since new it has not used any of the salt up and dishes and cups and cutlery frequently have to go back in for another go. Also only drys on the hottest setting? Any tips on what I could try to fix this?


... Dishwashers

Soap has collected and hardened inside dishwasher and comes off and flakes on the dishes. I have tried cleaning with a few cycles of 1 cup vinegar (no dishes) and making sure the water is the hottest. I also tried Dishwasher Magic which did not help at all. Can I use Lime Away? Is that safe? Or will that poison me with the next cycle of dishes? Is there another solution? Thanks, Missi Walkyourbike


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Kenmore 24 in. 16039 Built-in Dishwasher

My Bosch Classic Electronic Dishwasher has stopped mid cycle and the "Check Water" light is on. It won't drain at all. The detergent is still in its receptacle. I have tried the reset button on the dial but that doesn't fix it. I have also tried the old, turn it off, turn it back on routine which didn't work either. Please help!!


... Bosch Dishwashers

Bosch dishwasher model shx36l fails to stop pumping. The drain was clogged. I cleared the drain. Dishasher backed up, water overflowed. Clog has been fixed. Dishwasher will not stop trying to pump water out. There is NO water inside dishwasher. I wish to run another load however unit fails to respond. Pump is operating even when front door to doshwasher is open. Turning the power button to OFF is the only remedy to stop drain pump from operating. How to fix?


... Bosch Integra® 500 SHX46A0 Dishwasher

WE HAVE HAD NOTHING BUT PROBLEMS WITH OUR MAYTAG DISHWASHER RIGHT FROM DAY ONE. WE WERE TOLD IT WAS ONE OF THE BEST DISHWASHERS ON THE MARKET AT THE TIME, CONSUMER'S REPORT ALSO HAD REPORTED THE SAME AND THAT SOLD US. I WILL NEVER EVER PURCHASE ANOTHER MAYTAG DISWASHER! THE DISHES, CUTLERY, CUPS AND GLASSES DO NOT COME OUT CLEAN! I HAVE TRIED EVERYTHING FROM RELOADING THE DISHWASHER "PROPERLY", TO INCREASING THE WATER TEMPERATURE TO THE HOTTEST SETTING POSSIBLE, TO CHANGING DISH WASHING SOAP


I understand. \015\012The whole environmentally-friendly initiative represents a new type of technology, and sadly, new technology is not alway fully proven before being rushed to market. \015\012I don't blame you for being upset, but bef ... Maytag Dishwashers

I have a Kitchenaid Dishwasher, model KUDM01TJWH0. It runs through the washing cycle properly, but then the Rinse Only light begins to flash and it does not drain. I have tried hitting the Cancel/Override button (also tried hitting all other buttons, but they were ignored too), but it also begins to flash with the Rinse Only light together. If I unplug it, wait a few moments, plug it in and all the lights are off when it comes back on, wait a few moments and hit Cancel/Override, it empties and s


... KitchenAid Dishwashers

Dishwasher starts and runs to 2nd rinse cycle, when pump starts to pump water out, all lights on front display flash along with key pab lights blinking. you can turn off and restart, but is does the same. Diswasher will also try to start when in off mode. Replaced circuit board and it does to same. Did I get a bad circuit board or is there another problem. Also when I try water service test, I get a Rinse aid fault.


U REPLACED THE CIRCUIT BOARD IN THE DOOR, THE ONE BEHIND THE CONTROL BUTTONS? THAT IS THE TIMER, IT IS KNOWN AS THE CCU OR CENTRAL CONTROL UNIT, THAT IS WHAT CONTROLS ALL TIMED FUNCTIONS, SO THAT REALLY IS THE ONLY PART THAT CAN CAUSE THIS PROBLEM ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Mod m.d.c.5100aww ser28126829ax I had a repairman come out. He said the "sprayers" are plugged. I'm on a fixed income. With my bills I can't afford to get it fixed. Trying to fix it myself. I have the bottom sprayer unsnapped & can't get it back on. Thank you Don


Most dishwashers dispense the detergent via gravity and the sprayer\015\012arms spraying against the soap dispenser once the little door flips\015\012open during the wash cycle. Since it sounds like the soap door is\015\012opening I would look at the ... Dishwashers

I tried the fix for blinking lights on dishwasher, it tried to cancel and then went back to one blinking light, now what?


... Kenmore Dishwashers

I borrowed my neighbor's Karcher Model G 2650 OH (it's several years old). It had the yellow tip already on, but after awhile, I took the tip off to use a different tip,and pulled down the brass coupling at the end of the wand to insert the new tip. The problem is that the brass coupling at the end of the wand won't snap into place around the tip -- so I tried another, and another. No luck. And now the original tip that was on the wand won't snap back into place. HELP! I need to get my neighbor


... Karcher Pressure Washers

We have a new Whirlpool Dishwasher Model GU3200XTVY3, serial # F00404693 bought in April 2010. Yesterday,when we pressed the "normal" button, it started flashing then when we pressed the "cancel" button, it started flashing also. The dishwasher will not start when we pressed the "start" button. We tried to reset by turning off the power to the dishwasher and then turned it back on. All lights were off and then we pressed the "normal" button and it started flashing again. When we tried to pr


... Whirlpool 24 in. GU3200XTPS Stainless Steel Built-in Dishwasher

Bosch Dishwasher I have a stainless steel Bosch dishwasher, I made the "mistake" to try to see if I could fix the jammed handle from the door. Unfortunately, (did not realize the top panel comes off without opening the entire door). I removed the screws from the door frame (Inside panel), and the door springs/latched got loose. I would like to put it back together, but I dont have any diagrams on the door to make sure all parts are in place to put the door back together. I have been havin


Hi ED,\015\012\015\012It sounds like a real problem here. If the springs are still in one piece, my best guess is to to remove the springs from the door. Then attach the springs to the dishwasher body first, then reattach the spring to the door. Not ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Beko de3762fw dishwasher keeps stopping and starting when it gets to main wash. sounds like it is trying to pump water in but after each pump it turns itself off then back on again and tries another pump.


... Dishwashers

I have a frigidaire dishwasher 4000 series aqua surge with speed clean. The small spray arm on the ceiling of the washer came off. I found it sitting on top of some cups in the top basket. There is a loose part inside the retainer in the ceiling that moves back into the retainer when I try to put the spray arm back on. How do I fix this and how do I get the top basket out to work on it?


The top arm snaps into place. Simply unscrew the retaining clip from the ceiling of the washer. Inside of there, you will find a small white plastic clip. Make sure the two prongs are pointed down and poking out through the hole in the bottom of the ... Frigidaire PLD4555RFC Dishwasher

I have an old (not sure what year, 80s?) Kitchen Aid energy saver V Custom by Hobart dishwasher. We opened the dishwasher in the middle of a cycle and now cannot get it to re-start. When we lock it back up and push our normal buttons (Low Energy and Energy Saver/Dry Heat Off) or any other combination of buttons, the dial does not turn automatically and the cycle does not continue. I have also tried advancing the dial manually and still, nothing happens. I have even tried advancing it all the


... KitchenAid Dishwashers

The washing, heated dry, and normal wash light just flash. I have unplugged and plugged it back in several time, i tried restting it by holding down the Rinse only button for 15 seconds. I pressed the high temp ater, heated dry, high temp water, heated dry buttons to try to reset. I also ran the hot water line that feeds the dishwasher until the water was hot. Nothing has helped. The machine is18 months old and therefor no longer under warranty.


Please provide the make and model number of the dishwasher.\015\012do you hear pumps running? what was the last cycle it was at when the flashing started. was there water left at the base of the dishwasher from the cycle that stopped? ... Dishwashers

I have LG dishwasher for 2 years now. Working perfectly until one day one glass gets broken during washing cycle. Immideatly we get EO error. We check possible reason of error in the manual then decided to try to fix ourself. We open bottom cover and drain outcoming part. Immideatly we discover a piece of glass that was preventing a small plastic piece to rotate. We remove that piece of glass. Put back covers and machine. We connected it back to outlets and run it. All was working again !!! This


In order to fix problem we disconnected dishwasher, put it on one of side, opened bottom cover - the one that is outside of dishwasher. We find out the part that is\015\012connected to the drain horse. We take of 3 screw and open that part too ... LG Dishwashers

I have mold in my dishwasher. This happened about 6 mos ago and I used the vinegar and scrub method to get rid of it...it was a pain in the fanny! Now the mold is back...the dishwasher has also not been drying the dishes very well either, although in truth it never has. There must be some other reason that the mold is back! Oh, and I've used Jet Dry since I bought the machine 7 years ago, and have tried the ''leave the door open to dry the dishes'' .... any thoughts?


Get rid of the mold - Pour about 2 cups of bleach in the dishwasher with about 1 cup of salt, and a gallon of cold water, use the light wash, not heated. Make sure when you start the cycle it doesn't drain first or you lose the bleach. Also I don't ... Dishwashers

Mod. mdc5100aww ser. 28126829ax purchase date dec. 02 i called the serviceman he said the sprayers are pluged. i'm on a fixed income. with food house payment medicine dr. bills. i can't afford to get it fixed. i tried to get the bottom sprayer off. i could not get it off. now i have it unsnapped & can't get it back together. if you can help me i would appreciate it!!!!!!


... Maytag Dishwashers

Husky Model HU80833 pressure washer was working, then no pressure. What is wrong? Unit is over two years old. Had been working properly earlier in day. While trying to finish job, it lost pressure and nothing would make it get back up to pressure. Also tried it again later, same result


... Honda Pressure Washers

I have a KitchenAid drawer dishwasher model kudd01dppa and it has a mind of its own starting and stopping in the middle of the night/day and chiming all different beeps and sounds like its computer is glitching out. We had a service person out and they changed the main computer board and it seemed to fix it for a few days then started again. They gave up. They also tried some sort of reset or reboot but nothing has fixed this intermitten but long term problem. Any ideas?


"it seemed to fix it for a few days then started again" (sic) OK, well if this is so, then in my experience you are getting some, sort of Power Bourne Spike, Surge, or Transient, problem. If there is nothing else it can possibly be. Use a Pow ... Dishwashers

I had a draining problem, clogged line, fixed. Does the small in line rubber valve under the dishwasher in the transition piece to the hose have any real need to go back? and which direction it is cupped slightly. Also are there any assembly instructions? I cant seem to get it back quite right, or a white washer has split. not sure which.


... Whirlpool 24" Built-In Dishwasher - Black-on-Black

I have an almost brand new husky pressure washer (one of the big ones). It has been a life saver so far. just the other day it shut its self off. its gas powered so of course i checked the gas and oil. then tried to start it back up. but when I try to pull the pull string it wont come out more than about 3 inches. i payed 400$ cash for it to use on the trucks. does anybody know how to fix that? thanks


IT SOUNDS LIKE YOUR FLY WHEEL IS BAD OR NEEDS TO BE ADJUSTED ... Pressure Washers

I have a whirlpool dishwasher thats a quiet partner 2. the cancel drain light keeps blinking and nothing else is happening. i try to unlock it and then the normal light starts blinking also and still nothing happens. i called a local repair shop and they said i need to change the control board so i did and its still does the same thing. can you give me an idea of where i need to start to fix my problem?


Can you here the pump running or check to make sure there is no water in the base... ... Dishwashers

Kenmore Quiet Guard 3 leaves soap film. This happened before and we realized it wasn't standing straight. Bringing back to balance seemed to fix it. Now it's happening again but doesn't appear to be a balance issue. We use Jet Dry and tried changing detergent but that doesn't help.


We have had the same problem with clear glasswear with both Kenmore and Maytag diswashers, in fact any diswasher I have used. It seems to be a problem with diswasher soaps. Either try a different soap (continue using Jet Dry), or do what I do and p ... Kenmore 24 in. 15932 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1129 seconds