Having problems with your Dishwashers ?

My Kenmoore Ultra Dishwasher leaves black marks on my clean dishes. It's like a black rubber. What could be causing this problem?


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Kenmoore Ultra Dishwasher leaves black marks on my clean dishes. It's like a black rubber. What could be causing this problem?


... Dishwashers

A GE triton dishwasher causes hammer noise when stops filling. The sink faucet works fine as do all the other faucets in the house. I cleaned all of the traps in the dishwasher. Because the sink works, I don't think it is a sink valve problem. I turned off the water to the house and drained the system, the air chambers should be good. Is there some component of the dishwasher that could be causing the noise? Would cleaning the pump help? If so, how would I do that?


The cause of the hammering noise, (slamming) is due to the water inlet valve on the Dishwasher (DW) shutting off abrutly once the DW reaches the proper amount of water.\015\012\015\012If this is an older DW, you might want to replace the ... GE Dishwashers

Black residue My Amana dishwasher leaves a black residue on all dishes. The residue does not adhere to the dishes as much as detergent or food would, and is fairly easy to rinse off in the sink. It originally looks like coffee grounds at the bottom of a cup, but upon closer inspection it appears to be small particles of black rubber or plastic. When I put clean glasses in and just run them through the rinse cycle, the problem is the same. I have repeated this several times with clean glasses and


The black residue is possibly rust from iron pipes. I have an old house with iron pipes and when the washer opened the valve that lets water in from the supply hose it did so suddenly and created a "water hammer" that shook the pipe. The hose suppl ... Amana 24 in. ADB2200AW Built-In Dishwasher

Like so many others, I am experiencing a problem with my GE dishwasher's smartdispense. I have ALWAYS used the SAME detergent(Cascade Complete)and still have the gumming-up issue. I noticed that the dishes were not getting clean and when I opened the smartdispense cover I could see that the detergent was gelled. Spent the better part of 2 hours trying to remove as much gunk out of the dispenser as I could with the help of a plumbers flexible plastic drain cleaning tool. This really angers me as


I had the same problem as you also using Cascade Complete. It turned to a wet solid and completely cloged up. I have spent 3 days cleaning it and now have it working again. I had to spoon out what I could, but the purge method still would not wash ... Dishwashers

Hi I have fridgidaire dishwasher Model FDB635RFS4, Precision wash system, Ultra quiet II. Problem I am facing is top tray is not cleaning dishes, instead leaving soap residue. Could you please help me. I had done cleaning in the bottom of the dishwasher thanks harry [email protected]


... Frigidaire Dishwashers

Alii the glasses and dishes after being cleaned in my Kenmor Elite dishwasher has some find of grainuales (I don't know if it is unuse detergent or food particles)left on them after the dishwasher has been run through the clean cycle. Any ideas on waht could be causing this problem?


HiThanks for using FixYa. To start with check the water inlet valve if it’s filling the dishwasher with water. If water is more below the heating element, you may have low water pressure o ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

My dishwasher blades do not turn. I have replaced the water valve so water is getting into the unit. I have not however, cleaned out the area below the lower blade. Could this be the problem or does it sound like a motor problem? There was a bit of a burning smell up to this problem. Thanks.


... Dishwashers

I have a kenmore elite dishwashe and it isn't or is almost a year old. yesterday i did a load of dishes and it didn't clean them....at all. so i put a differant detergent in the washer and heard it fill but then let it run the dishes are hot like they went throught he cycle but the dishes weren't clean. what could be the cause of this?


When you say they are not clean do you mean they have a white film on them? if so it is your water actually and not your dishwasher. there is a product designed specifically for this problem. it filters the water going into your dishwasher. ... Tappan 18 in. MDR251RE Built-in Dishwasher

I have a whirlpool gold dishwasher model Quiet Partner 3. The top rack is not cleaning the dishes very well. We live in the country and have hard water. I am wondering if there could be a buildup of some sort inside the water arm and causing it to block some of the water. I am wondering if I could put something like C L R in the washing cycle to loosen up the buildup. Do you have any other ideas.


If it is just affecting the upper rack i doubt it is just a plugged spray arm (though i could be wrong). more likely than not you have a blockage on the intake of your spray pump motor. a series of bones, toothpicks, foreign material, etc could be bl ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Our LG dishwasher makes loud noises during the wash cycle. It rumbles like the machine is being rocked by an internal force. Could it be a problem with the plumbing? It happens for about 20 minutes of the 2 hour wash/dry process. ... And, the dishes aren't getting as clean as they should, especially where there's grease.


You may have a model which qualifies for a no cost service upgrade. Contact your local LG servicer with the model and serial number. They may replace the sump (AJH31248604) a drain hose (AEM69493803) and a guide assemble (4975DD1001), depend ... LG Dishwashers

We replaced thermal fuse (inc all wires), worked for about 2 months. Replaced thermal fuse again, ran it 2x's, 2nd X it broke. We have a new thermal fuse on hand, but need some advice on what could be causing the problems. When the dishwasher does work, it cleans as if new.


Probably a bad heating element, You may want to change that to before replacing the fuse again. ... Dishwashers

My dishwasher Kenmore Elite mod 665.16283402 does not clean dishes seems like cycle is running, but everything comes dirty lower impeller moves but two upper ones does not change their position at all all the sprinklers are not plugged, inside no food pieces what possibly could be the problem thanks Greg


... Kenmore Dishwashers

When my Kenmore 665 dishwasher is done with the cycle, the glasses on the outer areas of the top rack have stuff stuck to them. Almost like the jet spray is clogged and spraying the garbage. My "repairman" has taken apart and cleaned everything he could. The problem was solved for a few washes, but then the particles continued to come back. Any suggestion>


... Kenmore 15129 Built-in Dishwasher

We have a dishwasher that has cleaned great for six or seven years but all of a sudden we have started seeing a white film on all of our black plastic utensils, like spoons and the such. Now some is on our glasses..we have changed detergent it is not as bad but still happening. Do you feel it is a filtering problem?


If you have hard water, glasses can look spotted and cloudy even after cleaning. Sometimes changing the dishwasher detergent can help. The easiest solution to clearing up glasses that start to look cloudy is to add some vinegar to the bo ... Jenn-Air JDB3610 Built-in Dishwasher

I just bought a used Kenmore standalone dishwasher and ran it for the first time. The dishes on the top did not get clean and the soap did not come out of the closed soup dish. at one point I took a shower and was wondering if that might have influenced the water pressure enough to cause the problem. Is the soap supposed to open during the wash and could the poor water pressure prevent the top shelf from getting properly washed?


The inlet filter is probably clogged. Try letting it fill up. Open the door to stop it right after it starts to wash Pour a gallon or two of hot water in and see it it works better Stop and do this everytime it goes to fill up. If the door opens ... Dishwashers

I have a Precision Wash System Ultra Quiet I, model # FBD421RFR3 and something is not rinsing properly. There's a fine white powder on the dishes after the cycle. I tasted it and it doesn't exactly taste like soap (though I have tasted the soap from the box yet to compare). Some people say things about dishwasher salt or cleaning filters or the top arm not swinging. I'm a renter so I don't have the manual. If someone could point me to the most probable issue or instruct me what to do, that would


... Frigidaire Dishwashers

Hello, my slimline, Hoover, HEDS 668, AAA class, dishwasher is playing up. During a wash cycle, my meter tripped. When I put the power back on, all the light were flashing and beeping. The beeping stops after a while and all the lights stay on. It sounds like it is trying to fill up or drain or something too, but that soon stops. The filters are clean. What could be the problem? Hazel Stenson-Pickles


... Hoover Dishwashers

I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?


If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher

I have a Whirlpool Quiet Partner I (DU920PWKQ0) that the detergent dispenser door is not opening to allow the detergent out during the cleaning cycle. So, the dishes are not being properly cleaned. I do not regularly run a dishwasher cleaner through the dishwasher like some sites recommend. Is this problem more related to cleaning than mechanical ..... If it is a mechanical problem, can I take the door plate off the inside of the dishwasher and get parts if needed??? without a service vist? Than


... Whirlpool Dishwashers

Dishwasher FGHD2471KBO What could cause this whinning noise. We have replaced the draining mechanism and has not cured the problem, Could you please tell us what other moving parts could cause this problem


... Frigidaire Dishwashers

Bosch HydroSensor Dishwasher (SGS5342GB/17) - cleans dishes but constantly leaves a gritty residue in cups, glasses and now on plates. I have to rewash items and the problem is getting worse. I have cleaned filter, topped up salt and am now stuck as what else the problem could be. The dishwasher was here when we bought the house (2 years ago). Any ideas? Thanks


Hi Julie,\015\012\015\012The sprayer arms may need replacing. ... Bosch Dishwashers

Miele dishwasher makes grinding noise when turned on, there is a light on front next to inlet/drain. So I poured some boiling water into the dishwasher and then left it turned on and could feel the boiling water coming out of the drain hose so I am assuming it is an inlet problem, as it will drain but will not fill or otherwise work.There are a few small cracks in the outer hose of he inlet hose just below the grey box thing, could that be enough to cause the problem? They are only small so I di


... Dishwashers

I have an older hotpoint americana dishwasher. It is not cleaning the dishes well and in fact have to wash them first before using the dishwasher. Have checked the drain to make sure there are no clogs and found none. Doesn't have a drain problem, just doesn't seem to actually clean well. Any suggestion as to what the problem could be?


... Hotpoint Dishwashers

Hi I went to put my Bosch dishwasher on this morning only to find that it would not come on . there was water in the bottom of the dishwasher so i cleaned all the water out and cleaned all the filters but my dishwasher would still not work it was only when i went t o disconnect the dishwasher from the water supply did it come on Can you please let me know what problem i have with my dishwasher and is it likely to happen again


Hello,\015\012\015\012This video will help you fix your ouch dishwasher.\015\012\015\012 ... Bosch Dishwashers

I HAVE A BOSCH SHU5305 DISHWASHER THAT WHEN IT IS TURNED ON IT WILL NOT DRAW WATER FOR THE WASH. IT JUST SITS THERE AND HUMS. HAD A BIT OF WATER FROM THE SINK BACK UP IN THE DISHWASHER AND SPILL OVER ONTO THE FLOOR YESTERDAY. I CLEANED THE DISHWASHER FILTER WHICH WAS COMPLETELY CLOGGED. I THINK THE DISHWASHER WORKED FINE PRIOR TO THIS INCIDENT BUT THIS COULD ALL BE COINCIDENCE. I DON'T KNOW IF I HAVE A PLUMMING PROBLEM OR A WASHER PROBLEM. THE SINK WATER WORKS FINE. I CHECKED THE ON/OFF WATER VA


If the solenoid valve is humming and calling for water, you probably have a plugged screen in the valve, some you can get to and clean, some you have to replace. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2647 seconds