Having problems with your Dishwashers ?

I have a kenmore elite dishwasher model 665. it is several years old, and within the last year, it leaves food particles in glasses, etc... i tried different detergents and switched back and forth between powder and liquid -- still the food particles. Is there a "catch all" filter i need to find to clean?


Answers :

There should be a filter in the bottom under the spray arm. There should be 4 to 8 screws to remove to get to the filter, and clean.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a kenmore elite dishwasher model 665. it is several years old, and within the last year, it leaves food particles in glasses, etc... i tried different detergents and switched back and forth between powder and liquid -- still the food particles. Is there a "catch all" filter i need to find to clean?


There should be a filter in the bottom under the spray arm. There should be 4 to 8 screws to remove to get to the filter, and clean. ... Dishwashers

I have a Whirlpool Gold (Quite Partner) Dishwasher that is about 9 years old. I was using a liquid gel Dishwasher liquid and it has been working fine. After I switched to a Cascade Action Pads (solid powder pallets), its detergent dispenser did not open during the wash cycle. I cleaned the dispenser and switched back to liquid gel. Now the detergent dispenser (that looks clean and fine otherwise) has stopped opening during the wash cycle. What's wrong and what can be done? I can be contacted


As well as controlling cycle times, the \015\012timer on many dishwashers also functions as an actuator for the \015\012spring-loaded dispenser door. At a certain specific time during the \015\012cycle, the timer will activate a lever that in turn op ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

We have the same problem. At first, we were getting a horrible detergent film on everything. We thought that was because the detergent cup wasn't opening or the water was too hard or not hot enough. We kicked up the rinse agent as high as possible, switched to a liquid detergent, and only placed shorter items towards the door. The cup still wouldn't open consistently and our dishes still needed to be re-cleaned. We stopped closing the cup. No change. Why would liquid detergent leave a powder fil


You dont need a new dishwasher. it is your water that is causing the film and residue. go to www.dishwasherfilter.com. they have an awesome product that is affordable and g ... Dishwashers

Hi can you help me please I have a Zanussi DX6453 dishwasher which has stopped working. Having used the diagnostic facility it has come up with anti flood device, I have done the usual rocking the machine back and forth no sign of water. I have taken the machine apart and looked at the anti flood switch and this is bone dry and by lifting the float you can hear the switch clicking on and off. When I reassemble the fault is still there I'm begining to think the switch is faulty but not sure, do


... Zanussi 23 in. ZDT6255 Built-In Dishwasher

Dishwasher detergent cup not opening used powder detergent and wouldnt open so tried liquid still wont open when going through wash cycle. When done washing, cup still closed with detergent still in it


... Frigidaire 24 in. FDBB540 Built-in Dishwasher

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher

I have just purchased a used 501HT model and had it installed by a plumber and electrician. It does not seem to work, when I close the door and push the start button. Can you help ? Also, there is a liquid soap hose from the back; is liquid the recommended soap ? Can you use powder in them or not ? Any assistance is appreciated. Alicia


Hello,\015\012 If your dishwasher has not worked since the intial set-up. It could be any number of problems. I would check and make sure your machine's electrical is hooked up properly. A common mistake during set-up of high temperature machin ... Moyer Diebel 24 in. 501HT Built-in Dishwasher

Detergent sticks in main wash compartment. We use cascade complete with bleach (hydroclean action). When this problem started, I switched to cascade complete (liquid) and still same thing happens. The dishwasher is only 3 1/2 yrs old. Have used cascade complete since day one. Only difference is that this one is the one with the bleach. Could this be the prob? We have noticed that it is thicker that just the cascade complete. But thought the liquid would of fixed that prob. Agh frustrated. We hav


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

My Whirlpool Gold Quiet Partner III dishwasher will not start. I have installed a replacement control board that worked for awhile. When it quit I put the old control board back and it worked for awhile with a portion of the lights on the control panel lighting up. After switching control boards back and forth, it will not work at all now. It will run through the diagnostic program (Normal, Heated Dry, Normal, Heated Dry) but after that the start button plus other buttons are not lit so it will


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

Pump still going. Dishwasher flooded last week and pump still going every time i switch it back on. I have left off for 3 days and I have tried the reset.


Check the following:\015\012\015\012You'll need to get the water out of the bottom of the dishwasher - a wet vac usually works the best.\015\012\015\012Remove the bottom rack and check the pump inlet screen in the bottom of th ... Dishwashers

Hi, our new home us the KUDP02CR Built-in and we have two issues: 1) dishes on top and bottom are coming out dirty; unless we scrub very food particle of dishes and cutlery they just won't come out clean. Either food is baked on or cutlery/glasses/plates have a cloudy residue 2) the soap dispenser doesn't always open; we've tried cleaning it ourselves but to no avail. Sometimes it opens, sometimes it leaks out the liquid and other times it's still shut . Any help would be great. We've tried


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

After the dishwasher runs there is a lot of soap left in the soap dispenser. I've tried powder and liquid. Liquid is a bit better. I've tried using less soap but there still is a lot left. Also my glasses seem scratched. Thanks!


With the LG LDF6810 model, this is not a common problem.\015\012Please try the following test, With and empty dishwasher, add a small to normal amount of dry dishwasher powder and run an (empty) load.\015\012\015\012Check to see if any soap re ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Dishes are still dirty after a completed cycle. There are still food particles harden on the plates and glasses. I can hear it draining. but it appears that the dirty water is draining back into the dishwasher


... Whirlpool DU960PW Dishwasher

I have a hotpoint dishwasher model # HDA3500N20CC.rnThe blue jet-dry rinse agent turns a murky yellow color inside the dishwashers dispenser and the dispenser never seems to be empty. plus. And everything seem to have a white film & or spots. which gets worse with each and every wash. I switched from "cascade" powder to "finsh" powder with the same results Still occuring.


... GE Hotpoint HDA3500N Dishwasher

The dishes come out with a white film on them. they are not clean clear dishes, the bowls and glasses have a film. I was using cascade dry soap switched to liquid soap still have the problem. what can I do to stop this from happening?


The problem is hard water. go to www.dishwasherfilter.com they have an awesome product out to solve this problem. after one load your dishes will be spotless. very afforda ... Dishwashers

Dishwasher overflowed, garbage disposal still works. Ran the dishwasher and noticed food and debris shooting back into sink thru garbage disposal. Water was on floor. Upon completion of full cycle, water remained in the bottom.


Before loading into the machine you have to remove food particles. Washer will wash the greasy surface. If particles are left in the dishes, the same will find entry to the drain system. Check the drain filter in your machine. Clean them. Mostly prob ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Belling IDW604 Error E4 coming on machine, I have drained all the water from the machine and switched it off and back on again at the wall and it still isnt working. Can you please help????????


I found the solution myself. Underneath the machine, there is a plate. \015\012On the plate, there is a float and a\015\012 microswitch, when the water leaks onto the bottom plate it raises the \015\012float and activates the microswith which shuts d ... Belling 24 in. IDW603 Built-in Dishwasher

My GE dishwasher Model # GSD2200GO2WW will not drain. I took it apart cleaned out the food particles that were in the filter basket and checked the hoses... put it all back together... Still won't drain. now what?


Did you check the drain pump? if you remove the pump and take an extension cord and cut off the end and add two connetion terminals to the end plug em in then plug them to a wall outlet you willbe able to tellhow well your pump is actually working if ... GE 24 in. GSD2220Z Built-in Dishwasher

New dishwasher the soap dispenser door doesn't open when the washer is on any cycle. Therefore, dishes are not getting cleaned. Help. I have tried moving the button back and forth to break anything free that could be making it stick. Still doesn't work.


Having same problem + won't dry. Looks like this is a crap dishwaher. ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Does the two drawer use liquid or powder soap? Kitchen Aid Dishwasher is not washing things clean, there is a coating of dirty food particles on the dishes. Help!


About the soap: You can use both. I prefer tablets. \015\012About the particles: Before putting the dishes in, remove the food with a brush ($2.00) in the sink and run the hot water from the faucet for a 1-2 min until it gets really hot. ... KitchenAid Dishwashers

When I fill up both soap dispensers, only one is empty after the wash. The cover never releases the other soap. It says fill both and then cover the right side. But after the dishes are washed - the covered side is still full of soap. I've used both powder and liquid. Anybody know what to do? It is an older (don't know how old) early 80's maybe. Thanks, Wendy


Mine was just clogged. Ran thru couple times with no detergent. Used the packets and now it works just fine. ... Dishwashers

Continuous rinsing My son used a large quantity of washing up liquid instead of dishwasher powder and now the machine will not stop rinsing and is still full of bubbles. What can I use to nutrelise the soap and stop the rinsing?


Put 2 tablespoons of oil into the water at the bottom of the dishwasher it will help break up the suds. Sprinkle as well ordinary table salt liberally across the suds to disperse them. Try to drain the unit as much as possible, soaking up any residua ... Hotpoint 23 in. BF41 Built-in Dishwasher

We have had our dishwasher for quite a few years, and all of a sudden (within the past month), it has been leaving a gritty white powder on the dishes. We tried other soaps, and putting less soap in. We even tried putting rinse aid liquid in (which we've never had to use before), but it is still leaving the grit. What can we do to fix it? It is a Roper RU4300DQ3.


1)scaling in the boiler tank.(boiler tank to be cleaned)\015\0122)water hardness is more. ... Roper 24 in. RUD4000M Built-in Dishwasher

Our neff dishwasher has suddenly started to go wrong. When you switch it on a push a setting, it fills but does not wash. After about 10 mins it even drops the powder cube but still has not washed, it just does nothing. Really appreciate it if someone could help


If the cycle doesn't complete, check these:Water-heating cycle ... Dishwashers

Zanussi dw927 not filling inlet valve changed,supply to machine ok, calls for water solinoid activates for about 30secs shuts off and machine does no more. cleaned out two blue plastic pipes situated under a plastic cover which were both blocked, and put a hose jet wash thru where they were situated to clean housing out, put blue channels back still not filling up and now the inlet solinoid wont switch off when when it should and programme advances heater now comes on with no water in.manually


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0709 seconds