Having problems with your Dishwashers ?

My dishwasher door has lost it's tension. If not held while opening it drops open.

\015 It is kitchenaid model kudio1tj\015

Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher door has lost it's tension. If not held while opening it drops open.


... Dishwashers

I have a built under de dietrich dishwasher approx 4 years old and out of warranty. The various numbers on the identification are 1) 02062A 2) V29996U1/1 3) 36VLDHGB1 4) 9 44 02319. The drop down door has lost it's tension from the hinge/hinges,and crashes down when opened. I have to hold and lower it down when opening. Can this be repaired or do I need a new dishwasher? May Mc Pherson


... De Dietrich Dishwashers

Dishwasher door When I opened the door I heard a pop and now the door drops to the fully open position. It used to stay as open as I pulled it, but now there is no tension as if a spring broke.


You're right a spring has either snapped or come off of it's anchor point. Should be 2 ...one on each side of the door. you can order parts on line at several appliance replacement part suppliers... have your make and model so you'll get the right pa ... Kenmore Dishwashers

My miele dishwasher door all of a sudden drops and stays open half way. If i lift it up to close, it falls back down to half way. Adjusting the tension spring makes the door slam shut and not stay open in the down position


... Miele 23 in. Novotronic G841 Built-In Dishwasher

I have a Philco dishwasher Svelta DWN17 which works well but has lost its spring or counterweight for the door. The door now drops open when not locked for washing. I am having difficulty finding a servicing firm for this machine and would try to fix it myself if I could find a part and get some details on how to go about it. Can you help, please? Alan Wright


... Dishwashers

Kitchenaid dishwasher door lost its tension.


... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

Kitchenaid dishwasher door lost its tension.


... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

The door has lost it's spring and drops when opened.


Hi,\015\012\015\012Here are the parts you need to fix that...\015\012\015\012http://www.repairclinic.com/PartDetail/Hinge-Cab ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

Door opens without mechanical aid and drops too quickly


... Creda 18 in. BC20 Built-in Dishwasher

The door now drops hard when opening. In the past the door would drop slowly and was "not heavy" . I found a rubber piece on the floor just below the door. It looks like a rectangular washer . I am assuming the rubber piece helped slow down the drop of the door. Is this a correct assumption? Is this an easily repaired problem? Your help would be greatly appreciated


... Whirlpool GU2700XTSS / GU2700XTSY Built-in Dishwasher

Door Tension How does one adjust the door tension on a SHU43 model dishwasher? The door opens up all the way with no tension from the springs/cables.


Just about the most difficult job to do on a dishwasher, not normally a job for the home mechanic, i am an appliance engineer of 20 years and often shy away from jobs like this,there is often no adjustment, the hinges are sprained, more o ... Bosch 24 in. SHU43 Built-in Dishwasher

Door drops down no tension


What do you mean buy the door has no tension. looking at the model number it is the two drawer glide systm ... Fisher and Paykel DS602 Dishwasher

Door dropped Opened door on my FDB421RFR and a loud cracking noise occurred - now the door drops quickly. I guess the spring(s) have broken - does anyone know if the spring is on the rhs looking at the front? I sure hope so, I can probably access that side without pulling the unit out! Is it good to spray these with WD-40 or do they just age anyway?


... Frigidaire 24 in. FDB421RF Built-in Dishwasher

The dishwasher detergent is not dissolving. There is rinse aid in the dispenser - sometimes the door opens and the detergent comes out and sometimes it doesn't. If the detergent does come out then it is just sitting in the rack - should it drop to the bottom of the dishwasher? I have checked the door cleaned out around it to make sure the hook and release are working. I opened the door and the water is hot.


... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

I have a two year old Neff Dishwahster(S5453X1GB).The door is stiff to open after it is opened approx 30 degress and it appears to have dropped slightly.It appears to be the hinges which have either moved or broken although the former appears to be the case as the door fully extends after a bit of a struggle. Any advice greatly appreciated


... Neff Dishwashers

The door is very heavy when you open it. When you go to open the door it just drops straight down


Check the door hinges, they are spring loade to counter the weight of the door, if one or both have come loose or broken you will feel the full weight of the door. ... Dishwashers

I have a GE Profile Triton XL Dishwasher PDW 7880P00SS for the past 1.5 years. The manual detergent dispenser always has 50-75% of the detergent left over like the door didn't open sufficiently regardless of what soap I use (liquid, powder, etc.). Currently using Finish powerball tabs. I've seen some posts about a possible poor design of the racks blocking the door from opening, but wondering if there are any solutions out there (dispenser mechanical fix, just dropping a tablet in botto


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Hello my dishwasher door has dropped down when opened, I bleive there are straps which hold the door when open (these have been replaced when the washer was under warranty) how do you replace these the dishwasher is an intergrated Dedtric Regards Bob


... Dishwashers

DOOR TENSION PROBLEM : DOOR DROPS; NO TENSION AT ALL


I have had this problem and had to replace the cable (cord) and/or the springs ... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

I have a Whirlpool DUL300XTLQ3 Queit Partner III. The cleaning blades stopped moving-started it-waited awhile-opened it-the blades were in the same position. Took the bottom blade+filter cover off. Then I held down the metal piece on the case and switched on the micro switch on the door to see it running with the door open. The water shot straight up about 4-5" that's it. This does not seem to be enough pressure for the water to get all the way up to the top spinner. Am I looking at a new pump


If there is not enough water, the dishes would not get cleaned. Thiscould be caused by a partially closed water shut-off valve (locatedunder the sink), or a faulty dishwasher water valve (located at thebottom of the dishwasher, behind the kick panel, ... Whirlpool Dishwashers

Have a GE Quiet Power 3 Dishwasher. Went to reun it and when I closed the door no lights came on to pick a wash cycle. Nothing like it lost power. No buttons work, nothing. Opened door and removed inside door panel. Have power at door latch switch. Actually have power at all 4 connections and doesn't change when engaging switch as if door was closed. Switch does click but no power at front control panel. Whats up. I have my own Handyman/Home Remodeling business and I'm very good at fixing things


If your dishwasher is not running check the following \015\012\015\012You have already taken care of the 1st item.Power Supply The main power supply is the first thing to check. Also remove the toe ki ... Dishwashers

Jdb2100aws dishwasher - door handle fasteners loose, handle ready to drop off. This is a dissambly question: The middle section of the door has an upper one-third (which contains the input switch strip) and a lower two-thirds; the upper section must be removed to tighten the door handle fasteners. After wiring is disconnected (yes, power is OFF), the upper section appears to be held to the shell by some kind of barbed fastened from the inside, run through a tab on the door shell and into a fema


After removing the stainless cover l tried to disassemble the door further but found it difficult, there is a hard thick plastic cover, i took my dremel and cut a small hole large enough for a wrench to fit and tighten the thin nut on the handle, lin ... Jenn-Air 24 in. JDB2100AWS Built-in Dishwasher

Door mechanism door has 2 springs on each side, on the right the spring works on its own. But come to the left side and it has a long belt type piece of metal,the spring and a hook type piece that makes up how the door opens and closes.this left side has come apart and dont know how it goes together,therefore the door just drops very sharply to the dismay of my partner.plz reply to [email protected]


Wind metal strap around plastic bush and hook above hinge ... Candy 24 in. CD622 Free-standing Dishwasher

I have an ADB 1200 (or possibly an ADB 2200) according to the installation instructions. I lost the manual. Anyway, the door was becoming more difficult to open. Now it won't open at all no matter how hard I press on the latch. Any suggestions before I try to pry it open and probably break something? Bill


... Amana 24 in. ADB1200AW Built-In Dishwasher

Door Problem When we open the dishwasher the door drops down and bounces. Is it possible to limit the speed of the fall of the door? Many thanks Chris


There are set springs for the adjustment of the doors on the Bosch dishwashers. they are colour coded for different applications. They are accessed by laying the machine on its back and pulling the springs out of the base. first you will need to chec ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0976 seconds