Having problems with your Dishwashers ?

I want to plumb in a dishwasher but there is no waste pipe for the dishwasher to join on to


Answers :

Hi,
\015\012If there is a kitchen sink nearby you should be able to get a plastic waste pipe adaptor from a hardware store that simply screws in below the sink plug hole and joins to the U-bend pipework. It will have a short stub pipe on it for attaching the dishwasher drain pipe.
\015\012Hope this helps. D.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I want to plumb in a dishwasher but there is no waste pipe for the dishwasher to join on to


Hi,\015\012If there is a kitchen sink nearby you should be able to get a plastic waste pipe adaptor from a hardware store that simply screws in below the sink plug hole and joins to the U-bend pipework. It will have a short stub pipe on it for ... Dishwashers

The waste pipe on my hotpoint dishwasher is connected to a spigot. I now want to buy a Bosch replacement but all models have a waste pipe which is too small in diameter to fit the existing spigot. A smaller spigot does not seem to exist and there is no room to install a stand pipe. Can you suggest a solution? Thanks


Do you have a garbage disposal? It is usually easier to drain through the garbage disposal. There is a fitting for this on all disposals. Be sure to remove the knock out plug first. ... Dishwashers

Hotpoint dishwasher I need to change waste pipe on my hotpoint dishwasher. I was given this dishwasher by a friend and it works well but I cant connect the waste pipe to the bit under the sink as the rubber connection on the end is missing. I bought a new waste pipe but not sure how to connect


Did you have a dishwasher before? If so, you must have had a sink tail piece with a dishwasher drain coming off the side. For the connection, you may have to get an adapter to fit the end of the dishwasher drain hose to the sink tail piece. Take a ... Dishwashers

I have a neff dishwasher that is maybe 5 years old. im pretty sure there is nothing wrong with it as it was working perfectly fine before i had a plumbing problem a few days ago. after the plumbing problem was fixed the dishwasher doesnt seem to want to fill any longer. it sounds like it wants to work but its just not filling and going thru the cycle. does it just need to be reset or something? im not sure of the model number as ive misplaced the directions for it. could you please help? by the


Look for the connection from the valve to the inlet of diswasher. Check the hot water valve to be on. It is probably closed when anyone working on the plumping. Good luck. ... Neff 24 in. S5443X2 Built-in Dishwasher

Hello, I have a Neff Dishwasher S5453X1GB/74 and it's not draining the water out at the end of the cycle. I have unscrewed the filter and released the impeller. I have also cleared the waste pipe that runs to the sink waste and put loads of cleaner in the dishwasher. The pipes seem to be clear as water goes somewhere during the cycle but backs up at the end. A few times when I started a cycle the water did not spray out but I could here the drainer or motor? running. I jetted water through th


... Neff 24 in. S5453X1 Built-in Dishwasher

How do i change the waste pipe on a Siemens SE25235 GB dishwashe?


Yes. the side panel needs removing to get access to the fill/water matrix. to do this, you need to remove 2 torx 15 sized screws underneath the white seal of the side panel. make sure you have unplugged the dishwasher and disconnected its water suppl ... Siemens 24 in. SE25A266 ExtraKlasse Free-standing Dishwasher

Dishwasher i need to change the waste pipe on my dishwasher as the old one is too short. the old pipe goes up into the back of the machine, how do i get into the back of the machine and change the pipe?


You ..dont need to get into the back.With the bottom front panel off,disconnect the waste pipe frm the pump on the right and pull it through from its other end. ... Hotpoint 24 in. DWF32P Free-standing Dishwasher

Whirlpool Dishwasher Model #GU940SCGQ2 waste water from sink drain entering the dishwasher. Drain hose drains into same pipe as sin drain. Drain hose is elevated and looped as high as the top of dishw


... Whirlpool Dishwashers

I have a tricity bendix dishwasher and it is not draining fully at the end of the cycle? If I run the dishwasher into a bucket the water pours out nice n strong. The waste pipe is not blocked, and I have run out of worktop to ensure pipe not kinked. What is wrong? I am happy to pay if your suggestion solves the problem. Mark


... Tricity Bendix 18 in. DH090 Free-standing Dishwasher

I want to buy the machine, listed below, but I don't want to pay $130 for installation Bosch Dishwasher SMS50E12AUW. Do I need an expert or can I do it myself. I have installed my own dishwashers before, but they may be a little more complicated than an inflow outflow pipe now :)


Dishwashers are no more complicated to install than before. It's still just 1 water pipe connected and the drain hose connected to the drain and plug it in. Bish bosh bash. Hope this helps. ... Bosch Dishwashers

I have a Zanussi Fitted dishwasher and I notice that the board under my kitchen seems to be getting black,I think it is the dishwasher leaking water from underneath.. Is there any common problems with this type of dishwasher. Waste pipes leaking etc?? Are they easy to get out of the units and what shoulf I watch out for.


Yes sounds like some kind of water leak. Take of the front plinth and check underneath the units and DW. I presume you DW is adjacent to the sink so please cheak all pipes including waste asap. Also opening the DW door whilst it is running can splash ... Zanussi ZT485 Built-in Dishwasher

Hi i hace a haier dishwasher dw12 pfe2u ive plumbed it all lights come on wen try to put wash on it just flashes and beeps. when filling my salt container up its all cum out bottom of dishwasher . dishwasher isnt filling up wiv water all pipes have been checked


... Dishwashers

I have an LG dishwasher LD2120WH and the waste water pipe has split right where ti endered the machine. Can I remove that little white 'plug' and re-connect the pipe or do I have to buy a completely new one? Can you assist me. Also the wheels on the trays dont last and I would need some of those too.


... Dishwashers

I have a Zanussi dishwasher model DA 6141. For some time now it has not been completely discharging the water at the end of a cycle. But sometime it does completely dicharge.Two days ago it started leaking water from its bottom at the end of a cycle.I tried to locate the leak but was unsucessfuly. All the external plumbing is ok andf there is no leak from the discharge pipe nor water intake pipe. So perhaps its something to do with the water pump?


Hello David,\015\012\015\012Have you removed and cleaned both filters and checked they are inserted correctly? I've uploaded the filter cleaning instructions to Flickr for you:\015\012\015\012 ... Zanussi Dishwashers

I have a Bosch dishwasher model #SHU3032UC/U12 It is not pulling water from the water pipe to wash the dishes the motor wants to go thru cycles. It starts to pull the water by the sounds from the sink but no water gets into the dishwasher.


Hello. When no water is entering the dishwasher, there are two parts to check. \015\012Water-inlet valve\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012The water-inlet valve lets water enter the machine. If this ... Bosch Dishwashers

Candy dishwasher cdi 22e10-80, Lights P2 & 9h are flashing and machine beeping. Checked the inlet pipe & waste pipe, they are fine. Has water in the filter hole, don't know if that is normal.


... Dishwashers

Dishwasher HI there Water keeps dripping slowly from the inlet pipe. Its where the inlet hose joins the external pipe. I have tried changeing the hose but this has made no difference


LITTLE BIT CONFUSING, BUT WITH BASICS, CHECK FOR RUBBER WASHER THEN USE PLUMBERS TAPE TO SEAL THREAD OFF PROPERLY WHEN YOU REASSEMBLE.ALSO MAKE SURE IT ISNT THE TAP THATS CAUSING THE LEAK. ... Indesit 24 in. D63 Free-standing Dishwasher

Dishwasher will not fill with water. I've already checked the float assembly, that seems to be working fine. The water just doesn't seem to run into the machine. Little history on an unrelated problem: I want to mentioned that not to long ago my brother tried to put a bunch of celery through the garbage disposal. The sinks and pipes got all clogged up and we had to take them apart to clear up. Immediately afterwards the dishwasher stopped filling with water. I don't see how the two can be r


Hi,\012Here is a tip that will help you to find out why water will not come into the dishwasher... Dishwasher ... GE 24 in. GLD5500L Built-in Dishwasher

I have a Whirlpool DU810SWLQ0 that will not drain. I've pulled the unit out, snaked the drain tube, pulled the motor/pump, and pipe assemblies, and cleaned the food trap, which I also removed. I've run the dishwasher with a bit of bleach, and the water will pump in, get processed by the agitator, and be heated. When the rinse cycle comes, dishes get covered in food, and are never clean. Waste water was being used for a clean rinse. I've run the dishwasher with the drain dangling in a bucket,


Refer the wash system assembly dwg. Check if the ball (item 21) is sitting correctly. If it is out of ali ... Dishwashers

Have a Kenmore Freestanding Dishwasher that was working when hooked up to the sink. When we plumbed it in and connected the electrical directly, we now get an "F4" flashing on the panel with a beeping noise and the pump sounds like it wants to drain but just get a sucking noise. I've tried putting water in it to prime the pump, but still doesn't want to work. Do the codes mean anything, or point to a specific part?


... Kenmore 24 in. 16332 / 16334 / 16339 Free-standing Dishwasher

I have a brand new Blanco dishwasher but im unsure if it is a DWF6XP, DWF4X or DWIN7 model. It does not have a salt dispenser if that helps. Last night when running for the first time i had a plumbing issue where the drain pipe was not set high enough as it states it has to be 500 to 100cm of ground height. Also had a leaking sink drain pipe. Fixed all that and turned machine back on and it pumped all the water that was inside to drain. I have cancelled the program and restarted but now it is ru


Unplug it and wait 5 minutes. Plug it back in. This will reset the machine. Put it on full cycle and allow it to do a full cycle. It should work just fine. ... Dishwashers

Hi there, The error code 'strong and economy light flicker fleetly' is showing. the manual says that this means too much inlet water. We have drained the machine, cleaned waste pipe and tried to operate with a reduced flow from the inlet pipe but it's still not working. I filled the base of the dishwasher with water to see if it drains properly. It seems to be draining, but also leaking out of the base as well..? Any ideas?.


Hi The issue seems to be with the float switch assembly that is bad and should be replaced. Float assembly is found inside the dishwasher's tub, on the bottom. The water that ... Baumatic Dishwashers

How to change a wast pipe on a Beko DWD 5411 dishwasher


... Beko Dishwashers

I have a leak from my dishwasher. I have checked the waste pipe and water inlet but all feel quite dry. The water is grey which indicates i must be dirty water. Can you help?


Without knowing the manufacturer and model number of your dishwasher, I can't be very specific. But given the connections (both intake and drain) are not the source of the leak, the problem could be in the gasket between the motor and the cabinet (o ... Dishwashers

I just bought a simpson silenco 850 dishwasher & my son picked it up & took it to the property to install it .He said the waste pipe hose was missing the rubber end with the silver clip to hook on .Do I need to buy a new hose or could I find another rubber piece to slip over & re-attach the clip? Thanks


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1901 seconds