Having problems with your Dishwashers ?

Kitchen Aid Superba Wisper Quite will not start cycle

\015 This is an 17 year old diswasher that will not start a cycle until you open and close the door kind of hard to get it started. Sometimes you have to do it 5 to 10 times before it "kicks" in. Other than that, once it begins, it finishes the cycle programmed. Before this problem, you use to open the door and hear "clicks" that sounded like relays resetting preparing the dishwasher for the next cycle. Since this problem existed, we do not hear those clicking sounds anymore when the operation is finished and we open the door.\015

Answers :

Intermittent door switch, should be available, easy to change out and inexpensive.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kitchen Aid Superba Wisper Quite will not start cycle


Intermittent door switch, should be available, easy to change out and inexpensive. ... Dishwashers

I have a Kitchen Aid Superba KUDS24SEBS1. The inlet water pressure is good and the dishwasher fills and starts the wash cycle, however, after the initial spray of water, it seems that all of the water drains out and there is nothing left to continue the cycle and wash the dishes. It's like it's not able to fill up enough to wash the dishes.


When "full" of water, the normal height of level is about 1/2 below the heater assy(large blackish grey coil below he spray arm).. if theres enough water in the unit nad its still not "spraying",its quite possible that your filter/chopper assy is cl ... Dishwashers

I have a kitchen aid dishwasher that is stuck on the clean cycle. It will drain water, but no water seems to be getting into the washer. If i push the start button, cycle will not start. The clean light is the only light that will stay on. the other lights will go on, but they eventually go off without starting the cycle. Is this the thermal fuse???


... KitchenAid Dishwashers

Hello. I have a Kitchen Aide KUDG255HWH1 that will not start from a cold state. The "Energy Saver Dry" and "Normal" indicator light/ switches failed to operate about 1 month ago and since then I have needed to use the "High Temp Wash" and Soak & Scrub" cycles to get the unit to run. Now these two indicator kight will illuninate but the unit will not start when I depress the "On" soft switch. When I depress the cancel switch the unit starts with what sounds like a pre-start cycle. Pleas


Hi\015\012\015\012\015\012\015\012\015\012\015\012Thanks for using FixYa. To reset the dishwasher switch\015\012off the dishwasher from the power socket and mains for five minutes and then\015\012switch it back on. If still the issu ... KitchenAid Dishwashers

Kitchen aid dw won't start,, the lights come on it beeps at me but won't start the cycle... also, during a cycle i can open the door and it doesnt halt the cycle, it just keeps on going


See this causes:Power from the housereset the c.breaker from your hose or replace blown fuse ins ... KitchenAid Dishwashers

Kitchen Aid superba the green normal cycle light keeps flashing


... KitchenAid Dishwashers

Hi, I have a KitchenAid Superba diswasher model #KUDSO1FLSS2 that has quit working. All the buttons seem to work and the lights light up as they should but when you hit the 'start' button the light that you selected for whichever cycle would flash once, then close the front door and dishwasher would start. The 'start' button was acting up and would have to press a few times before light would flash and then the dishwasher would work. Now everything lights up but start button does not work. Opene


Hi.Test the start button switch.The switch is tested by disconnecting power and reading Ohms, this will tell you if it does open and close the circuit.If the start button is part of the control assembly, then this kind o ... Dishwashers

Dishwasher stops at mid cycle. Starts blinking for 7 consecutive times stops and starts blinking again. A technician came and showed me how to reset by pushing different buttons and it will start again but only to stop once again. Please help. Email me at [email protected] Thank you Kitchen Aid KUDSO1FLSS6


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Kitchen Aid Dishwasher - model: KUDPO2CRBLOrn Ran the dishwasher twice on pots/pans cycle and sani rinse with a special cleaner recommended due to build up and items not getting clean. (soap left all over them) Cleaned machine out great! Now, the only choices that will light are "quick clean up" and "rinse only." Even if I choose them, when I hit the "start" button - the machine will not start. No other lights will light. Machine will not start. Any ideas?? Thank you!!!


... KitchenAid Dishwashers

Kitchen aid dishwasher KUDIO1FL not starting with cycle light blinknig


... KitchenAid Dishwashers

I have a kitchen aid dishwasher model kudmo1tjbl0 and my problem is that sometimes I cannot start a cycle until I remove the ribbon attached to electronic control assemply and replug it to the board, then it will start. I have replanced th assembly back in November. Any ideas??


... Dishwashers

I have an old (not sure what year, 80s?) Kitchen Aid energy saver V Custom by Hobart dishwasher. We opened the dishwasher in the middle of a cycle and now cannot get it to re-start. When we lock it back up and push our normal buttons (Low Energy and Energy Saver/Dry Heat Off) or any other combination of buttons, the dial does not turn automatically and the cycle does not continue. I have also tried advancing the dial manually and still, nothing happens. I have even tried advancing it all the


... KitchenAid Dishwashers

Kitchen Aid When changeiny cycles, it starts buzzing and when we open and close door and hit start the it finishes fine


It could be a timer issue (if it is a timer model) or a solder joint in the controller if it is an electronic model, ... Dishwashers

The sanitized light flashes on our Kitchen aid dishwasher - KUDP01ILWH1 after the run cycle is complete. The clean light is solid green, but the sanitized just started flashing instead of staying solid. Just started last night.


... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

Kitchen aid kude40fx no power - KitchenAid Superba KUDE40FX Fully Integrated Dishwasher with 5 Wash Cycles, 6 Options, EQ Wash System, ProScrub Option, ProWash Cycle, Culinary Caddy Utensil Basket and Whisper Quiet 46 dBA Sound Insulation System


... KitchenAid Superba KUDE40FX Fully Integrated Dishwasher with 5 Wash Cycles, 6 Options, EQ Wash System, ProScrub Option, ProWash Cycle, Culinary Caddy Utensil Basket and Whisper Quiet 46 dBA Sound Insulation System

I have a Kitchen Aid dishwasher Model KUD1021RWH1 that is malfunctioning. The display has the Heavy Duty, Normal and Cancel lights all flashing on and off at the same time. This problem has been intermitent. The happens after we fill the washer and want it to start. I push the Normal button and the heavy duty button flashes with the normal button and the dishwasher wont start. So, I push the cancel button and it flashes also.The washer has been cycling fine since we bought it a few years ago unt


... KitchenAid 24 in. KUDI02IR Built-in Dishwasher

My Kitchen Aid Model KUDPO1FLSS5 dishwasher does not turn on. The lights all light up when selected. When I press start it used to blink all the lights and begin to run. Now, none of the lights blink and the cycle never starts.


... Dishwashers

I have the Kitchen aid KUDS01DL dishwasher. It was working fine until last week. When starting a cycle, the washer fills with water. Once filled, the motor makes a humming noise and does not circulate the water. I end up stopping the cycle and the discharge pump empties the water. I took apart and cleaned the basin this morning. I did find some random garbage but it did not seem blocked. Do you have any ideas?


... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

I have a kitchen aid dishwasher model # kudso1ij and it just blinks the rinse cycle button. if you try to push the cancel button it won't work. when you close the door it blink the 2 for just a brief second then goes back to the dashes. One night it just started on its own. Can you tell me how to reset it or fix this problem.


... KitchenAid Dishwashers

My Kitchen Aid's upper drawer keeps turning off mid cycle and beeping red. I push the start button again sometimes several times a load. The dishes come out fine but this is a hassle!


... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

Water does not completely drain? Garbage disposal is functioning properly and hose from Kitchen Aid dishwasher to Garbage disposal is good. I ran the dishwasher a couple of times start to finish for rinse cycle and approximately 1/2 inch of standing water on the bottom. Any ideas? Please help. Thank you.


\012Hi,\012Here is a tip that I wrote that will help you with your dishwasher not draining problem...Dishwasher Problems - ... KitchenAid 24 in. KUDI01ILBS Stainless Steel Built-in Dishwasher

Kitchen-aid model#KUDI01ILBL6.Clean lite constantly flashes but I cannot run cycle.I have had problems with the door latch for the last 3 or 4 months.Wondering if that could be part of the problem.The door is shut when we are trying to run cycle but dishwasher won't start.


HELLO THERE AND THANKS FOR USING FIXYAYes this is certainly a problem when the door will not latch properly.See the door needs to latch properly to allow the door latch solinoid to complete the circuitOften times the latch just ... KitchenAid Dishwashers

Kitchen Aid Superba Add dish Rinse Cycle green lights blinking constantly


... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

Have Kitchen Aid Dishwasher KUDS01FKSS1 The lights on the control panel wont go out it wont start, sometimes the lights flash,the control lockcomes on after a cycle.


HI. I need to know which lights are flashing? This in very important to know. Kindly look at the control and let me know which lights are flashing. Is it the rinse light,cancel light or all? ... KitchenAid Dishwashers

Kitchen aide dishwasher won't start. Water left in bottom after last cycle. No lights will come on along the panel. KUDI01FL


I had this and the thermal fuse needed to be replaced ($14 part).If the lights won't come on on the controller and you are sure you have power to the dishwasher, then check the thermal fuse.1. turn off the power to the machine ... KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1564 seconds