Having problems with your Dishwashers ?

DOOR SUPPORT SPRINGS - Dishwashers


Answers :

If they popped off their hooks, open the appropriate panels and put them back on. If they are actually broken, find a supplier of parts for your make and model machine and order them...If you don't have the skills to do the job, you know what to do!
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I've just installed a Miele 5500SCU Dishwasher and the springs that support the door cant be adjusted far enough to take the weight of the door, does anyone have any suggestions?


If the dishwasher is brand new, then there is an issue with the configuration of the springs, i.e not mounted correctly. A factory dishwasher door should not need to be adjusted. However if it is older, it is possible that the springs came off, in wh ... Miele Dishwashers

The dishwasher door of model P/No 3850DD3006A has broken. It is no longer supported by the internal spring. Can this be repaired?


... LG Dishwashers

DOOR SUPPORT SPRINGS - Dishwashers


If they popped off their hooks, open the appropriate panels and put them back on. If they are actually broken, find a supplier of parts for your make and model machine and order them...If you don't have the skills to do the job, you know what to do! ... Dishwashers

Hello! I have a Kenmore Dishwasher Model # 665.15805890. The dishwasher came with the house and I'm guessing it is around 10 years old. My toddler was having a great time flipping the door to the soap dispenser back and forth until he pulled the door off of the pin. Now, I can't seem to position the spring in a way so that the door will spring back. I never looked closely at the hinge before, so I don't know if that is the only reason the door will not release the detergent, or if something


Hi.Please see if the diagram here can help you. Check if the spring is that indicated with nr ten in diagram. ... Kenmore Dishwashers

I found the problem with my dishwasher, a spring in the handle (154556703 Frigidaire Dishwasher Door Latch) had broken. All I need is the spring, not an entire door latch assembly. Is there any way I can get the part number for the individual spring? V/r Matthew Quirk


... Dishwashers

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

KitchenAid KUDI10FL dishwasher- The door spring system broke and I repaired it, but now all of the sudden the dishwasher will not start. The door may have been dropped a couple of time before the spring system was repaired, but it did not hit the floor, just a hard sudden stop. All of the cycle setting lights come on when they are pressed except for the start button. Just before the start button stopped working the dishwasher started by itself or started several hours after cycle selection had b


Hi- It is possible that the door latch is not completely engaging. If the door dropped the hinges may have bent a little thus preventing a good contact with door switch. Try pressing and holding the door shut, hard, and pressing start. If that wor ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a fisher and paykel single door dishwasher model dw918 td. The other day its door spring collapsed and the door had a free fall. The dishwasher operated fine. But we have accidentally opened the door and let it free fall under its weight a few times. Last night the dishwasher began its cycle and stopped after 10 minutes - no beep, no alarm, display was fine. it just stopped. I opned and closed door a few times. Pressing the start/stop button only resulted in a beep but no action. I let


... Fisher and Paykel Dishwashers

Dishwasher Amana ADB2500AW door spring and cable


The nylon cord is part of the door spring mechanism. One end hooks over a tounge at the bottom of the door, then the cord goes around a pully at the bottom, then hooks onto the spring. If the other sides spring is still attached, duplicate it. ... Amana 24 in. ADB2500AW Built-in Dishwasher

Fix door spring and cable, dishwasher Amana ADB2500AW


... Amana 24 in. ADB2500AW Built-in Dishwasher

How do you replace the door spring on the dvf300ju2 dishwasher?? As I emptied the dishwasher there was a loud bang and now the door is heavy too lift up....I presume that it will be the spring??


... De Dietrich 24 in. DVF120J Built-in Dishwasher

Amana dishwasher door springs need to be replaced how do i put door springs back into dishwasher


... Dishwashers

I have a Fisher and Paykel Nautilus DW920 dishwasher. However, the door to the detergent dispenser does not open reliably every load -- usually I have to open the dishwasher door about 20 minutes into the load and open the soap dispenser myself. The catch on the dispenser will have released, but the dispenser door will not have sprung open. I am not sure exactly what the problem is -- the soap dispenser door simply seems a bit stiff in its holster. Given a little nudge, it springs open fine. I h


... Dishwashers

The spring-loaded flip-up door for the soap dispenser on my Kenmore dishwasher is broken. It seems the spring has come undone. I have had two repairmen come by and neither could put the spring back in. It seems senseless for me to get a new dishwasher just because of this stupid little spring. Help?!!


... Dishwashers

Dishwasher LG LD-4120M door spring repair


... LG 24 in. LD-12BW5 Free-standing Dishwasher

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

Hi Just bought and installed a Bush wkp12-9348 integrated dishwasher. There seems to be a problem with the door. When I open the door the spring seems very tight and tries to close. I am unable to unload the dishwasher as the door will not remain down. Can anyone help or advise what I can do? Thanks


... Dishwashers

The door spring must of came loose or broke off.The door falls open if you don't hold it as you open it. Before I start dismantling the dishwasher to repair this is it inside the door or on the side of the dishwasher.


You can probably change that from the underside Dave. But you may need to pull the unit out. It should be exposed from the side ... Jenn-Air JDB6510 Built-in Dishwasher

Hello,I hope you can answer the question below for me. My dishwasher is a Hotpoint model BFI680 - integrated. I want to replace the old interlocking assembly with a new one as the spring has broken and I can not close the dishwasher door. I have trouble removing the old interlocking assembly though. I can not see any screws that keep it into place as with other models. Instead, it looks like that it is "clipped" to the dishwasher door via the two inner side round holes at the bottom. Tried to re


... Hotpoint 23 in. BFI68 Built-in Dishwasher

I have an Indesit DV62WHUK dishwasher and the last night the door made a banging sound when it was opened and now it won't close and will fall back under it's own weight. I suspect either a spring, spring cable or a hinge has broken. How do I check this? Is the spring mechanism in the door or main unit?


There is a plastic unit behind the door handle which houses a spring under tension. This latches the door closed and makes the electrical connection to allow the machine to work properly. You need to buy a new unit (\302\24315) which is a bit fiddly ... Indesit 23 in. DV62 IX Built-in Dishwasher

The door has always made a horrible noise that I could not get to go away (I shot some WD40 into all available places). I learned to live with the noise. NOW, the spring on the door has obviously broken. I am afraid someone will open the dishwasher and hurt a small child with the falling door! I see where you addressed the broken spring problem. Do you think I could fix the horrible noise at the same time? Do you think this is something my husband could fix?


... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

Whirlpool DU927QWDG1 Hi, The problem I'm having with my dishwasher pertains to the door cover for the area I place the soap. There is a small spring which helps the door pop open to release the soap when washing. I cant figure out how to place the spring so that the pops open.....right now when I run the unit the door stays latched and the soap doesn't get dispensed. Any ideas on how to repair this or where I could maybe get a parts manual??? Your expertise will be greatly appreciated!!!!


... Whirlpool GU2400XTP Built-in Dishwasher

Kitchenaid model kudso3ctblo, Type 577-0 Ser. FU3202943 When the dishwasher is finished, the soap tablet is still inside the dispenser & the door is still closed. We can open the door by hand & see that the soap has not dissolved. We found a tiny spring on the floor last week. Is there a metal spring in the dispenser? Could this have broken off & now keeps the door from opening?


... Dishwashers

I have a GE dishwasher (purchased in1992) the door falls open I suspect a broken spring. I looked all over the door hinge and cannot locate a spring(s). Where are they located. Also because of the age would I be better off to just replace the washer?


... Maytag Dishwasher

I have a Hoover dishwasher model D7610 and the springs in the door seem to be broken. The door drops down hard instead of easy. Can I replace the springs myself or do I have to get a repair guy to do it?


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1875 seconds