Having problems with your Dishwashers ?

I put my meat grinder parts in the dishwasher. All of the chromium washed off leaving the dark grey metal showing.I want to know if this will infect the meat that I put into the meat grinder.


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I put my meat grinder parts in the dishwasher. All of the chromium washed off leaving the dark grey metal showing.I want to know if this will infect the meat that I put into the meat grinder.


... Dishwashers

I have a sears pressure washer, model 580752300. The pump on the underside vibrated lose and broke a couple screws. It came off and the oil drained out. I replaced the screws and it's ready to go except I can't find out how much replacement oil to put back in. Sears has larger containers but won't tell you how much oil to put in. However, there's a pricey pre-measured container they want to make you buy. Anybody know how much oil goes in that pump?


... FAIP Non Marking Pressure Washer Hose 4000 Psi, 50ft. Length

I have two questions and would greatly appreciate some help: - What oil to use in the pressure pump of a Ryobi Pressure Washer RY80030? - How much to put in? The pump model is MTP092150 from FAIP. As per the manufacturer, the oil is not to be changed or topped up by the end-user, I know, I know, but brought to a service center instead - I certainly don't want to do that, and there is none close to my place anyway. The reason I need this is that I had to take the pump apart and a


... FAIP Non Marking Pressure Washer Hose 4000 Psi, 50ft. Length

My dishwasher is flashing for salt it is a Miele and i want to know what kind of salt to put in and how much - i have the plastic bowl thing to put it in the dishwasher


Use the salt supplied by your service provider. Or try in a super market.Ask for dish washer salt. If a plastic funnel is supplied use it to fill the salt compartment. The quantity as it holds. Do not fill kitchen salt used for food ... Dishwashers

I Have an LG-2060SH Dishwasher. The dishwasher has been running fine until this week. I put a Finish bottle of dishwasher cleaner in which did the job, but the next day I put a new load of dirty dishes in the washer and it started to make a groaning noise durung the wash and rinse cycle. I wanted to know if you had any advice before I call out a repair man. Thank you. Mrs K Evans


... LG Dishwashers

I have a HJA8630 dishwasher from Howdens. The small grey plastic clip which stops the metal runner at the top from falling out has snapped. it is the one at the rear of the machine not the front one. I need to know where to get this spare part please!!


... Dishwashers

Dishwasher 66513752K601 keeps blowing the thermal fuse. (Bi-Metal W10258275). I have replace the Thermal fuse several times. After i replace the fuse for some reason after a few months or less it will blow it out again. I have also replace the front panel assembly after it stopped working correctly. I would like to know how to test the dishwasher to find out the root cause of the fuse issue. I don't want to be replacing the fuse every time and don't have the $$ to buy a new dishwasher. Everythin


... Dishwashers

The detergent dispenser [Main Wash] door doesn't stay closed. It seems like there is something wrong with the latch, but we can't what. We've cleaned it, but don't know what else to try. There don't seem to be pieces missing or broken. But no matter what, when we put in the detergent [we use the cubes] the door always just pops open and the detergent ends up falling to the bottom on the dishwasher. The dishes are still getting relatively clean, but we want to solve the problem with the door


... Frigidaire FDB1200RG 24 in. Built-in Dishwasher

The peice that the water comes out of at the top of the dishwasher. It didn't break it looks like it unsnapped. It has a rubber connector on it I just want to know how to put it back on.


... Bosch 24 in. SHU5305UC Built-in Dishwasher

I want to know where to put the tablet or detergent in the dishlex global 300


You may want to refer to page 10 of the instruction manual available from this site. ... Global Amici Set of 2 Glass Covered Dishes

Hello, I purchased a Kitchen Aid Architect II series KUDSO3FTPA3 ~ two years ago. It is deigned so you can put your own panel on it. Duw to a design issue with my cabinets I was not able to add my own panel and wanted to purchase the stainless panel to cover the front of the dishwasher. Kitchen aid was no help, they sold me a panel that would not fit and then would not take it back! Then they said I would need to replace the entire door for $389.00! I need to know if there is a stainless


There is a MUCH better way! go to www.applianceart.com, these guys have tons of panel options including stainless and fax stainless that was featured on HGTV and the Today Show. www.applianceart.com (Appliance Art) ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Rinse aid We don't have a manual for our ASKO 1253 dishwasher and I want to know where to put the rinse aid in.


... Dishwashers

Want to know how to remove the bottom wash arm.


Insert a flat blade screwdriver and pop it out.\015\012Vitally ... Dishwashers

Whirlpool dishwasher model DU1055XTSQ2 will not run. Only half of lights on control panel working. Probably need to replace control panel. Do I need to replace the bi-metal fuse also. What does the bi-metal fuse do, how would I know if bi-metal is bad, what are symptoms.


... Whirlpool Dishwashers

My LG Dishwasher LDF7932ST has White, Black and Green wires coming out of the unit, no problem there, however the ALL Grey Cord that was in a separate bag does not help me identify which wire is white and which wire is the black, I can only see that the green wire is in the middle of the three attached to the grey cord as I can just see a little bit of green, how am I suppose to know which ones are the other two? I tried pullilng back the grey rubberized cord to see if it was show me ... but no


Hi,\015\012\015\012There is a simple way to tell is to look at the plug end of the cord...\015\012The blades on the plug will be two different sizes...\015\012The blade that is the larger of the two will be the white wire... ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

I actually don't know what type of Bosch I have. I know that is a problem, but maybe you can still help. It has a simple panel that says: Pot Scrubber, regular wash, quick wash, rinse and hold. When I turn on quick wash, sometimes it says 38 min. 45 min. 56 min. We want to keep it at 38 minutes and we don't know why it varies. If we have to open it mid-cycle, it switches to a higher cycle time. How do we set it for 38?


On a Bosch dw, it has a light sensor to sense soil in the water.. if the control feels that the water going through the sensor is not clean/ or clean it will add or minus time..one thing you can do is make sure that your drain line from dw to sink dr ... Bosch 24 in. SHU43 Built-in Dishwasher

Leak where right angle cast brass(?) piece meets bottom of Hobart dishwasher. The bottom of this piece is connected to the drainpipe.I don't know if it is part of the dishwasher or part of the drain. Either way, I want to know how to fix it.


Vent Hood drain ? ... Hobart AM14-253 Free-standing Dishwasher

I have an SDMO generating set with a Mitsubishi S3 L2SD engine it is supposed to run at 1500 rpm but goes up and down depending on load, if I set the rpm at no load to 1500 as soon as a load is applied the revs drop and so do the cycles from 50 to perhaps 48, if I set the revs on load, then off load the revs go up and the cycles hit 53 plus which means for example my washing machine does not want to know, I suspect the govenor on the pump but do not want to change the pump if this is within para


Set the no load revs such that you get 51 Hz out of the generator, at 80% load this ought to give you something like 48.5 Hz with less than a 3% drop in output voltage. If not, you might have governor problems but I'd try servicing and adjusting it b ... Karcher 2500 PSI Pressure Washer

I want to know if part 1543358 comes apart the holes are clogged and I want to clean it


It would be very helpfull if you post the make and model number of your dishwasher.\015\012\015\012Happy to help you but very hard to track something with just a part no.\015\012What is it? ... Dishwashers

What size door goes on the NEFF s41m50 dishwasher? we want to replace our existing Bosch semi integrated dishwasher that is 16 years old and want to know if it is the same size door to attach?


... Neff 24 in. S4443 Built-in Dishwasher

Just want to know what number do you set the rinse aid dispenser at as I keep filling it with the rinse aid & don't know the right amount, seems to empty too fast.


I set mine to 2 ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a credaplan integrated dishwasher with no manual it came with the house so is about 15-20 years old. I want to put salt in it. I have found a compartment with an 's' on it but just want to be sure that this is the right place. I have never owned a dishwasher before. Thanks in advance for your help.


... Creda 24 in. DWI34 Built-in Dishwasher

F2 Code Hey, I have a single drawer built in Fisher & Paykel dish drawer and today I pulled the spray arm, filter and large metal screen out to clean them as we have been starting to get a bit of stuff left behind after washing lately. That was all good After putting it all back in though I went to use the dishwasher and it stopped and came up with an F2 fault, I thought I may not have put the bits back in properly so pulled them out again and noticed that on the rotor that connects the motor to


Fault F2 means the rotor is not rotating. If you say some of the vanes have broken off, they could have been jamming it. This should spin freely with minimal force when installed correctly. If you removed the rotor itself, you do ned to take care whe ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

KENMORE THANKS FOR THE INFORMATION YOU SENT ME R TRENDLER I HAVE TO TAKE THAT AS THE BEST ANSWER I GUSS I JUST DID'T WANT TO HERE THAT.ITS TIME FOR A REPAIR MAN. FROM SEARS OR PUT IT TO THE CURB.BEFOR THIS I HAVE PUT 4 BUTTON PANELS IN THIS MACHINE+4 CIRCUIT BROADS.THE PARTS I BOUGHT ARE GUARANTEE FOR LIFE.DOSENT DO ME ANY GOOD NOW.700.00 FOR UNIT 350.00 IN PARTS CRAZY.I COMPLAIN TO SEARS THEY TOLD ME THEY WOULD HELP AND GIVE ME 10% OFF IF I BUY ANOTHER ONE HA .I DID'T MEAN TO GET DOWN ON YOU GU


Next time come here first we will always help ok dont buy ken more buy whirlpool its the same thing or frigidaire or ge they all make kenmore sears has changed from the old times sorry for your troubles wish we could have talked sooner follow that s ... Dishwashers

I have a Simoniz 1900 presure washer and had to take it apart to fix it. I need to know how to put it together again as it has been awhile since I have had a chance to work on it. Can anyone tell me how to put the engine and water pump assembley together again?


I took my pressurewasher simoniz s1900 apart, i had to take off the pump and all oil leaked out.\015\012how and where can i fill the oil in to the pump\015\012and what type of oil would i use\015\012thanx ernte ... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0932 seconds