Having problems with your Dishwashers ?

I am installing drain hose to dish washer, model # 6651382 & affraid to pry loose the thin gray box where hose is clamped to take hose off. Has like cupped hands over hose on top. Open on bottom


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am installing drain hose to dish washer, model # 6651382 & affraid to pry loose the thin gray box where hose is clamped to take hose off. Has like cupped hands over hose on top. Open on bottom


... Dishwashers

Honda GX 240 on woodsplitter stopped running. Tries to fire a couple of times each pull but dies. Found debris in gas tank. Cleaned out the tank and hose to carb. Cleaned out the sediment cup. Cleaned out the rust and debris from the bottom of the float bowl. sounds like debris in carb jets? Is it worthwhile taking the carb apart and cleaning it, or just order a new carb?


Install a new plug, and make sure your gas mixture is not to rich, And you air cleaner is clean ... Honda 8 HP Engine

My dishwasher will not drain. it goes through the first 10 minutes of a program then i get the OE error code. i have checked my hose for kink or clogged-there is none, i have made sure it was level. i would like to get the filter off but it looks like i would have to take the drain pump out from the bottom to check if any thing is plugging it. was just wondering if anyone has any tips that would help. thanx


1)check the drain pump working\015\0122)check any block from drain pump to drain hose. ... LG LDF6810 Built-in Dishwasher

GSD6610G01BB DISHWASHER - Dishes coming out with light chalky film - likely build up of lime/calcium so we are taking it apart. We are unable to get the bottom metal screen off because of the plastic 'drain (oblong cup shaped)' won't lift out. Can't find our manual - not even online. Do you know how to get this rigid plastic cup/drain out?


Hi,The scum, film and white residueproblems have started since the reductionof phosphates in dishwasher detergents.Here is a tip that will help you to solve the problem of films, residue, and scum in your dish ... Dishwashers

Dd601 ver2 Top draw wont drain properly.Leaves about 2 inchs of water(clean). Occaisionally u3 code shows.Have tried eveything i can think of. HP is correct Drain hose and filter to pump are both clear. No blockages. Have swapped motors from bottom to top and makes no difference. Have swapped inlet hoses around and no difference. Have run diagnostic and when in drain mode P2 it drains very slowly - takes 1 minute 42 seconds to drain 2 litres of water. Bottom draw takes just 30 seconds to do the


I had the problem with the top draw not draining properly and the dishwasher showing the U3 fault code on my DD601 v.1, I did'nt have a copy of the dishwasher manual so it took the following steps, this is best done out side to save on messing your k ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

DD601ver2 Top draw wont drain properly.Leaves about 2 inchs of water(clean). Occaisionally u3 code shows.Have tried eveything i can think of. HP is correct Drain hose and filter to pump are both clear. No blockages. Have swapped motors from bottom to top and makes no difference. Have swapped inlet hoses around and no difference. Have run diagnostic and when in drain mode P2 it drains very slowly - takes 1 minute 42 seconds to drain 2 litres of water. Bottom draw takes just 30 seconds to do the s


Check for restriction in sump. ie remove rotor, push pipe cleaner or similar from filter sump into rotor sump ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Connector hose we tried to adapt the dishwasher hose so that instead of hooking it up to faucet, it connects to the the undersink water pipe, using tubing and clamps and a shut off valve. we can't get it to stop leaking where the clamp is. Are there adapter kits avail to do this? This way we wouldnt have to keep taking the hose on and off from the faucet.


The water pressure is too high in the intake for your kit. use a higher grade kit or reduce the pressure . ... Danby DDW1805W Designer Series Free-Standing Dishwasher

I have a hotpoint built in automatic dishwasher model HDA3740G02SA. When my dishwasher runs all the cups on the top shelf seem to have dishwashing soap powder left in the bottom of the cups. I do not over fill the cup where you put the dish washer powder in. It seems like it isn't rinsing the glasses and cups on the top rack of the dishwasher properly. Do you know what the problem would be and how to correct it?


Make sure the arm on top isnt hitting something, each time you load it each in there and spin it to be sure it moves freely, also make sure your rinse agent container is full of rinse agent. ... Hotpoint 24 in. HDA3740G Built-in Dishwasher

I bought a used GE Triton XL d/w with no manual. It worked great but now it is not cleaning anything, when the cycle is over the soap cup is open but half of the soap is still inside of the cup. I opened the d/w during a cycle and the dishes are wet top and bottom racks so I know it's getting water but the dishes are still filthy. Why is the soap not working? It's like water is spraying everywhere but the door where the cup is!


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... GE Tritonr XL GSD6260JCC Dishwasher

The quick connect attachment on the hose is leaking when connected to the machine. I would like to take off that attachment and replace it with a standard connector similar to a garden hose. How do I do this.


... Pressure Washers

I have an older GE potscrubber 1000 and it looks like mold is collecting in the bottom. Dishes are not getting clean. Can I take apart the stuff on the bottom to clean it all? Why would this be happening?


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Dishwashers

The upper spray arm does not turn. There is plenty of water volume as I have cleaned out all orifices and pipes with an air compressor and garden hose. Plenty of flow. Bottom arm rotates and sprays like a fire hose.


... Asko D3731XLHDSS Built-in Dishwasher

Pressure Once I have the powerwasher started and going (water to it before starting) i can't get it to go to full pressure it will prime up like it's going to go to full pressure give me just a shot of full pressure then go back down to probably half pressure and remain there then prime again for a second then back a coninues cycle! Maybe there's a seal or something somewhere I should look at. Hose and pressure from house is good, the seal whee the hose attaches to the bottom of the washer is ne


This is usually a problem with the "dump valve" defective in not being able to hold the pressure but only able to release it prematurely as it should only do so when to much pressur is built up inline. Only recommend qualified pump tech. But check pu ... Coleman Pressure Washers

Hi, My EdgeStar dishwasher suddenly started leaking during the draining process ... looks like a sprinkler down one bottom side. I've removed the hoses to check for a blockage, and checked the screws on the bottom, and those all seem OK. What else can I do? Any helpful suggestion is most appreciated. Liz


Www.edgestar.com/ownersmanuals/DWP40Sownersmanual.pdf - United States\015\012\015\012\015\012\015\012Above is your user manual, below, is the support website for Edgestar.\015\0 ... EdgeStar DWP40S Free-Standing Dishwasher

Our AeG "Favorit 6050W" diswasher produces dirty dishes- with a grimy deposit left at the bottom of cups and bowls. Looks like dirt but is baked on! The diswasher is clean, as is the filter/trap at the bottom. I cant work out how to fix this.. any ideas?


... AEG Dishwashers

I own a KUDS01FLSS3 KitchenAid dishwasher. The lights on the control panel do not come on and a cycle can not be started. There is about an inch of water in the bottom of the dishwasher basin and it looks like the previous cycle did not complete. I have checked the wall outlet that the washer is plugged into and the washer is receiving power from the wall. And ideas? My next thought was to take the door off and check the power supply running to the door panel and control panel.


Servtek06 writes:\015\012check connections @ control board/module. May be Control Board/Module. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

When I take a glass or cup out of the dish washer after they are cleaned and heat dried, or a day plus from the cabinet to put cold water,too many small bubles are floating on top the water surface, as a soap-like condition; it clears up shortly. The tech told me it is normal. I think it is not normal because I suspect the rinsing is not totally complete because of the water conservation design. Am I drinking soap-water?


Use a rinse agent., such as jet dry. the owners manual will provide you with the specific location as to where the rinse agent dispenser is locatedl ... Dishwashers

Cloudy will not come off when washed by hand almost looked like it looks scratched and and somewhat of a ring look on top and bottom of glass. I have a water softner too.


If it does not wipe off then this is called "etching" and it is perment damage you can avoid it with certain things. Set your water softener to hardness level of 3-4 grains per gallon. Do not prewash dishes before putting them in, just scrape. Dry wi ... Whirlpool GU2400XTP Built-in Dishwasher

Hi, We have a Frigidaire dishwasher machine 1500 series with fully electronic control. It is a new unit, has been installed nearly 4 months ago. The other day, when I went to take the dishes out of it, I notice that the rubber gasket that seals the door had come off somehow. Along with it I saw, sitting on the bottom, two pieces that looked like part of the seal, but I didn't know where they came from. I put the rubber gasket back on, but now the pieces and now the dishwasher will leak when runn


... Frigidaire Dishwashers

Black residue My Amana dishwasher leaves a black residue on all dishes. The residue does not adhere to the dishes as much as detergent or food would, and is fairly easy to rinse off in the sink. It originally looks like coffee grounds at the bottom of a cup, but upon closer inspection it appears to be small particles of black rubber or plastic. When I put clean glasses in and just run them through the rinse cycle, the problem is the same. I have repeated this several times with clean glasses and


The black residue is possibly rust from iron pipes. I have an old house with iron pipes and when the washer opened the valve that lets water in from the supply hose it did so suddenly and created a "water hammer" that shook the pipe. The hose suppl ... Amana 24 in. ADB2200AW Built-In Dishwasher

I have a whirlpool gold model GU1500 diswasher. When the rinse cycle ends the water pumps out into the garbage disposal like it should, but then water backs-up from somewhere into the bottom of the dishwasher. The overfill protection drain seems OK...the water doesn't overflow. It doesn't have a air gap on the sink. The drain hose goes directly from the dishwasher to the inlet on the garbage disposal. It appears to be properly installed per the installation instructions. The washer is about 4 ye


Seems you answered your own question here. You need to make an air gap in the drain hose - take as much slack as possible and make a curve (upside down U) under you sink as high as you can go. Make sure you clip ot to back of the cabinet to stabili ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

KitchenAid Drawer Dishwasher/Model KUDD01DPPA bottom drawer won't shut. Help! we just installed and the bottomw drawer won't shut. it seems like the hoses are in the way.


... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

Got standing water in bottom of dishwasher model #GSD5500GWW/CC/BB. We found some plastic cake decorating tips in the standing water, and hear crunching like more tips when we turn the machine on. How do we take remove the spinning thing in the middle, or anything else, that would allow us to clean out all th plastic tips?


... GE Dishwashers

Bosch wont Hello i have a Bosch DLX Series dishwasher and i put it outside and covered it while i did my kitchen remodel.. 6 months later kitchen is done and i move the washer back in. It turns on and it sounds like its running but it wont take in water from the hose. which is on and connected. any suggestions thanks very much...Steve


Faulty inlet valve or water in the bottom tray which will activate the float swich and pump out any water. See that this moves up and down freely. Turn electrics off first. ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

We have a Blomberg dishwasher. We came to a finished cycle to find water in the bottom. We have removed the water by hand, cleaned the filter and the hose. The lights come on, but it doesn't respond when trying to run a cycle. It will do it's ''finished cycle beep sequence'' at the end of the cycle that it didn't actually run. We have reset it by holding down the start button. Turned it off and on, etc.


I am curious what the repair guy found. We have the same problem. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1292 seconds