Having problems with your Dishwashers ?

Correct connection of anti flood device on John Lewis washer dryer

\015 I have a John Lewis washer dryer which I think is made by AEG. The cold supply point terminates vertically upwards, so the hose (with anti flood device on the end) has to be installed vertically downwards.\012\012There is nothing in the installation instructions to say whether this orientation is allowable (in fact the instructions don't even show an anti flood device on the hose).\012\012The installer from JL suggested the orientation was incorrect and the valve needed either to be horizontal, or if vertical, needed to be connected to a supply point that pointed downwards.\012\012Can someone please advise whether I have the device installed in a working configuration, or whether I need to get the supply point reoriented?\015

Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Correct connection of anti flood device on John Lewis washer dryer


... Dishwashers

I have a John Lewis dishwasher (JLBIDW901). Today it would not begin wash cycle and displayed the fault code i30. The manual states that this means the Anti-flood device is activated. I know the sup


... Dishwashers

John lewis anti flood device - Dishwashers


... Dishwashers

Need to know how to re-set the anti-flood device


I managed to clean the filter inside the dishwasher and drain a little residual water. I then re-plugged in the appliance and the anti-flood device seemed to reset and I have n't had any problems since. ... Dishwashers

Anti flood device is activated


... Electrolux Dishwashers

Hi can you help me please I have a Zanussi DX6453 dishwasher which has stopped working. Having used the diagnostic facility it has come up with anti flood device, I have done the usual rocking the machine back and forth no sign of water. I have taken the machine apart and looked at the anti flood switch and this is bone dry and by lifting the float you can hear the switch clicking on and off. When I reassemble the fault is still there I'm begining to think the switch is faulty but not sure, do


... Zanussi 23 in. ZDT6255 Built-In Dishwasher

Resetting Zanussi Anti Flood Device without removing built-in dishwasher


... Zanussi 23 in. ZDT6255 Built-In Dishwasher

Reset anti flood device


... Zanussi 23 in. ZDT6255 Built-In Dishwasher

Anti-flood alarm on esf 6125 buil-in dish washer not easy to move or tilt


... Electrolux Dishwashers

Anti-flood alarm on buil-in ESF 6125 dish washer


... Electrolux Dishwashers

My TroyBilt Pressure Washer 2500 PSI 2.3 max gpm will not pull detergent through the tube. I have the correct tip on the nozzle and the tube connected to the pressure washer and in the bottle of detergent but I'm getting nothing. Any ideas? Thanks! -Carson


If you follow the chemical hose back to the pump it will be attached to a barbed nipple, behind the nipple there should be an o-ring, spring and a ball.A lot of the time if you are using the proper nozzle in the low pressure setting and still c ... Briggs & Stratton Pressure Washers

I have a zanussi ZSF2440 dishwasher, when it turned on by the power button on the front you can choose a cycle and start it, Once the cycle is started it fills up with water but doesn't stop until it over flows setting off the flood protection, which cuts the power, so all the lights on the display go off and stops the water flow and drains the dishwasher and keeps draining the dish washer while the flood protection is on. It seems as if the dishwasher doesn't know when its reached its correct


... Zanussi Dishwashers

Reset anti flood device in dishwasher Beko DWD 4310 S


**** the water out of the pan below the dishwasher, there is a float in the pan if you have a leak and the pan fills with water ... Dishwashers

I have a Coleman pressure washer model PWO952750. The connection to the pump for the hose sprayer broke off at the pump. Looking at a parts list I believe I need a Manifold kid. Am I correct ?


... Coleman Pressure Washers

My dishwasher will not start. It is a frigidaire / electrolux FDB1050REQ. I have checked thepower....and reset the circuit breaker.......then pushed the start button.....the light comes on on the front of the washer like normal but no water starts filling. I have jiggled the anti water overfill device but still nothing. HELP!!! The front of the dishwasher says Frigidaire, however, the inside of the door where the model# is says Electrolux


... Frigidaire Dishwashers

I have a Karcher K3.91M pressure washer that pulsates when the trigger is released (off). It works fine when turned on, pressure seems OK. Before this started the unit would just turn off until I again wanted to use it. Is it a problem ? Correctable? All connections seem tight & I see no leakage.


... Karcher K 5.85 M Electric Pressure Washer

Looked at the maunal , it tells me the anti flood device has been activated, can i fix this myself??


... Zanussi 23 in. ZDi6053SX Built-in Dishwasher

ANTI FLOOD DEVICE ACTIVATED - Electrolux Dishwashers


... Electrolux Dishwashers

Flashing code has told us that the anti flood device has activated on our Zanussi ZSF6128, any suggestions as to what this could mean and how to fix it. Thanking you


... Zanussi 24 in. ZSF6120 Free-standing Dishwasher

I have a Hotpoint FDW80 Dishwasher. The drain pump runs continuously, even though there is no water inside, I poured water in with a kettle and it does drain correctly. After a short while fault code AL01 appears. I have removed the base tray to check the "anti-flood" swithch and that is OK, even with the switch disconnected, I still get AL01. Any ideas?


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Anti flood device has activated on my zanussi ZDF231,also there is quite aloud whirring sound ,like a motor struggling to work


The anti flood activates when water (even a small amount) appears on the bottom of the machiene. This is usualy a leaking pipe but can also be caused by a clogged pipe. Most machiens do have a plastic pipe that (from the flat water tank) feeds water ... Dishwashers

Aeg 40860 dishwasher Anti-flood device is activated.


... Electrolux Dishwashers

THE anti flood device has been activated. I have emptied the salt tank, how do I reset the safety valve on the water inlet hose?


Dishwasher is Electrolux ESL64010. How do I reset the anti-flood since the error beeps 3 times. ... Dishwashers

Hi, I have Dishlex DX 301 and it comes up with fault code 30 several seconds after starting. The manual says The anti flood device operates and to contact Customer care centre. I know something needs cleaning somewhere but where? I am handy with tools!


Hi,\015\012 \015\012Error code 30 means flood switch in base has activated due to water on lower tray. Find out where the water is leaking from, repair the leak. Dry off the lower tray & fault code will ... Dishwashers

Purchased a Bosch SMU50E15AU dishwasher and think the water hose may be too short as the washer needs to be installed in the corner rather than directly next to the sink - read that due to the anti flooding valve may not be possible to extend.. Any other solution?? Please help/advice Rgards


You will have to add drain hose to this type install . do not use a smaller size. 5/8 in ok and no sharp bends . ribed drain hose is good . whirlpool ext hose kit is a good one to use . this should not cause any problems. mm ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1050 seconds