Having problems with your Dishwashers ?

Tings not holding dinner plates

\015 Dinner plates fall against each other when stacking in dishwasher. Tings are not curve to hold dishes\015

Answers :

Please replace the parts go www.repairclinic.comGod bless you
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Tings not holding dinner plates


Please replace the parts go www.repairclinic.comGod bless you ... Dishwashers

Re: Thermador Dishwasher DWHD64E I love the dishwasher as it performs well and quietly. My problem is with the flip tines in the bottom rack. It was a great idea that allows for different configurations when loading dishes BUT the tines do not stay in place. I will load plates, for example, and as I add a plate in the established configuration, the tines move collapsing the entire row of plates. The repositioning notch does not hold up with the weight of the dishes. I prefer the old station


... Thermador DWHD64E Built-in Dishwasher

My standard size dinner plates are too tall, the rotating part is catching the plates


Some machines have height adjustable top shelf.\015\012\015\012Should be couple of clips on side of rack to raise / lower.\015\012\015\012Other than that you will have to get smaller dinner plates.\015\012\015\012\015\01 ... Whirlpool 24 in. ADG7540 Built-in Dishwasher

Dinner plates sizes 27cm and 26l1/2 don't fit.


... Hoover HED661280 Dishwasher

Normal dinner plates hit the top washer arm in Bosch dishwasher


TRY TO ADJUST THE FINS IN THE BASKET TO SIZE PLATES . THE MANUALLY RECOMMENDS HOE TOLOAD DISHES. ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

I have 2 ophelia tams of england dinner plates can you please advise me of the year and value


... Dishwashers

Indesit D61 dishwasher... Upper spray arm catches/sticks on back of machine. Can I only use upper tray on lower setting hence unable to wash dinner plates in bottom tray due to height restriction.


... Indesit 24 in. D61 Free-standing Dishwasher

I used the "rinse only" cycle on the dishwasher a little while ago. I've never used this cycle before. After dinner I tried to start the dishwasher, but no other buttons on the panel respond except the last one I used, which is the rinse only cycle. I push and push, I tried pushing and holding, nothing works, I get no lights no anything. I've been using the "light wash" cycle for a long time and I normally just push the start button and the last cycle used starts automatically, so I wasn't a


Try un-plugging the dishwasher (check for cord under the sink) or turn off the breaker to it to re-set the control board. If this does not resolve your issue you may have a defective key panel. ... Dishwashers

JENN-AIR Model number JD3B10AWX. Bottom of dishwasher is dirty, I want to clean it. I have removed six screws holding plate down, but cannot find any way to remove spinning blade. I think there's a filter underneath that I can clean or replace. Questions: 1. How to remove spinning blade? 2. Am I going about this correctly. Thank you


We have been having issues with our model where there is dirty sand deposited inside of glasses and dishes.You need a torque wrench for a triple square torque screw ... Jenn-Air Dishwashers

Potscrubber dishwasher leaks water at the drain pump valve shaft opening at the metal plate holding the solonoid


... GE 24 in. GSD2120C Built-in Dishwasher

I set rotary dial for Normal Wash which it does but does not turn off, rotary dial keeps turning automatically thru t Water Miser, Rinse Hold, Drying, Plate Warmer until reaches Off. Dishwasher operates normally otherwise. Have cleaned the pump and spray arm.


Hello, welcome to FixYa.I will start by saying your po ... Kenmore 17259 Free-standing Dishwasher

The top rack has a spinner under neath it and it physically hits the dinner plates keeping it from spinning, the bottom rack cannot go down any further


Then either position the top rack higher or use smaller plates. There is simply no other solution. ... Maytag Dishwashers

Belling IDW604 - How do I raise the upper basket......in this dishwasher so that the upper spray arm can rotate without bashing my standard size dinner plates below? I'm told you can fit bigger wheels but won't that stop the upper spray arm from connecting with the water supply?


... Belling 24 in. IDW602 Built-in Dishwasher

My dinner plates won't fit in can I adjust basket in anyway


... Hoover Dishwashers

I JUST HAD THE BOSCH DISHWASHER MODEL SHX45PO5UC INSTALLED. THE BOTTOM PLASTIC KICK PLATE THING IS NOT FASTENED SECURELY TO THE UNIT. WHAT HOLDS IT SECURE TO THE DISHWASHER SO IT DOES NOT PULL OUT ABOUT 4 INCHES?


... Bosch Integra 500 SHX45M0 Built-in Dishwasher

My Kenmore dishwasher, about 5 years old, is not cleaning well any more. Glasses look cloudy,and I assume the bowls and plates are not clean also, but that's harder to detect unless I hold them up to light. I use a rinse agent. What's the problem? Is it worth having a service person look at it or should I just get a new one? It's a Kenmore Elite ultra wash dishwasher.


Although I used my credit card to pay for the live chat, it bounced me out before the service person could respond. So I tried another service and two people who do home repair told me what the problem was and what it would cost to fix it. Since the ... Kenmore Dishwashers

Our dinner plates hit the rotating arms of the jets. We have checked the manual and we are loading correctly. Just doesn't make sense.


Solution - there are 2 sets of rollers about 2 inches apart. You just click off the stoppers at the end of the sliding arms on the top shelf, take out the rack and put it back onto the higher set of rollers!!! ... Hoover Dishwashers

I have used my Bosch Dishwasher; [SGS6302 GB/07] [FD 7866 680062] for many years, with faultless performance. Last week, after loading it with Dinner plates, etc. I turned it ON and it declined to start, merely presenting me with an "F" on the display screen. Could find no solution in the (useless) instruction manual. So I guessed that "F" means;- a) Filter (blocked)? b) Fault condition. I've cleaned the filters, checked the power supply, water supply and drain hoses, but nothing seems to


Hello John,\015\012\015\012The "F" error in the display for Bosch dishwasher`s simply indicates, and I quote from my bosch service error code book, "water level or filling error, under fill, overfill or water in base ... Dishwashers

Commercial Hobart CHH 50 very fine granular feel to the back of dinner plates after wash cycle. water softener fitted, hard water area. any thoughts? thank you


Hi there,\012Remove rust-creating items from the dish-load;Use the recommended amount of granular (powder) detergent. Powders hold minerals suspended in the wash water better than gels. Always use a high guilty detergent, some ... Hobart Dishwashers

The plates fall over in the dishwasher (Whirlpool).


... Whirlpool Dishwashers

Dishwasher washing food off plates, etc., but redepositing


... Whirlpool 24 in. DU940QWD Built-in Dishwasher

On a Hoover hfi 3015 dishwasher what holds the heater element in position? I have bought a replacement element as the old one (still fitted to m/c was open circuit). Does the nut between the connectors have anything to do with holding it in place or is that just to hold the heater assembly together?


... Dishwashers

I have an Equator Mini Maid PLS602S dishwasher. It works fine, but the upper spray arm fell off and the clip and knob holding it in place are missing. Equator said they no longer make this model and don't have the parts. Can you tell me where to get the clip and knob to hold the upper spray arm in place. I know there is a little white clip - I actually had it but lost it, because when I tried to hold the arm in place with that, the next time I ran the dishwasher the arm fell off again. I


There are no parts sources that i can find for this dishwasher, but my suggestion to u is this, locate an appliance repair shop in the local area that has dishwasher parts, bring the portable unit down to the shop and see if they can mat ... Equator Dishwashers

After running our dishes through a wash cycle we noticed there was still a lot of food stuck on the plates & glasses etc. We cleaned out the trap but due to the murky water in the well, we also pulled out the racks & removed the bottom plate. The underside was greasy and had a lot of grim stuck to it as well as the bottom of the drawer itself. We washed the filter trap, swing arm and plate in the sink. We loaded it with the dishes that previously did not come clean and ran a full cycle. The


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Hi There, I have a Zanussi dishwasher ZDT 6252 that doesn't clean my dishes properly. Cups/glasses on the top tray get residue left on them if the dishwasher is anyway full or potatoes are on the plates (even after rinsing plates). Can you please recommend what i need to do? I have ran a dishwasher cleaner through on hot cycle. Many thanks in advance. Patricia


... Zanussi 23 in. ZDT6252 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0194 seconds