Having problems with your Dishwashers ?

Dw1840bv - lance leaking at handle

\015 The handle leaks and by the time I have used for 1/2 hour am soaked\015

Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dw1840bv - lance leaking at handle

... Dishwashers

Have a Karcher kb4040 that continues to run constantly even when the trigger isnt pressed. Also water flows out of the detergant hose when im not pressing the trigger. Pressure seems down slighlty, not much. This happened after i ran water out of trigger gun with no lance attached, machine switched on. Seems to leak from trigger handle aswell. Many thanks in advance

This is two things. One is the back flow check valve to the soap line is leaking. The other is the pressure switch on the output side of the pump. ... Pressure Washers

Simpson power washer electric 13-SIE-170 Handle leaking. Took assembly apart at the back of the handle, reassembled, still excessive leaking. Should there be a washer

... Simpson Pressure Washers

Campbell Hausfield Pressure washer model 1549. After a few years of storage, I cannot prevent the powerful spray leaking from the connection between the Gun and the Lance. I replaced the O-Ring, and tried other means unsuccessfully. Spray from the joint is almost as powerful as spray from the lance nozzle. The Briggs and Stratton engine has been cleaned and operates well. The pump operates well. But the lance connection refuses to seal.

Hello,Most likely, the housing has split and seal is not being made. There is a chance that the hose is leaking where the fitting is crimped on (my experience, but different pressure washer). Are you able to see a leak when turned off b ... Campbell Hausfeld Pressure Washers

I have a karcher 4.6 pressure washer that developed the usual fault.... drop in pressure and leaking from the cylinder head. I have replaced the cylinder head and the attached control chamber. The pressure is now good again and the leak is fixed. Unfortunately now when the trigger on the lance is released the the machine does not switch off automatically. I have bled the machine by letting water run through it

... Karcher Pressure Washers

The handle leaks and seems to not have the tension on the handle. I have it apart and it seems like a tension string is broken but I can't see how it reconnects.

They don't offer parts for the trigger guns, you would just need to purchase a new trigger gun. There is a number of different trigger guns for these machines though, what is the model and part number of the machine that you have? ... Karcher 2500 PSI Pressure Washer

Leaking water The washer gun handle is leaking water when pressed,what is the problem? Can it be fixed? The model number is 015356-203.

The o-ring and the plastic insert is broken. They may not have a part replacement, may have to get a new gun. Take the gun apart and you'll see the problem. ... Karcher K2.26 Electric Power Washer

The handle on the powerwasher leaks and the opening will not close. This has cost it to loose pressure. Can this be fix or do we have to purchase a new handle?

... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Replaced cylinder head due to loss of pressure and leaking. Pressure now back to normal and no leaks but machine does not switch off automatically when lance trigger released...

You may have a faulty unloader valve first remove the fitting the you attach you high pressure hose to inside inspect the checkvalve it may be stuck in the open position free it up reinstall and try again .try not to leave pump over pressurized for m ... Karcher Pressure Washers

Troy Bilt pressure washer model 020209 will not build pressure-have checked all screens and intake in pressure hose and garden hose from house to pump. water leaks at gun handle- took it apart and oiled piston- was ''grabby'' but now snappy but still leaks. Engine starts fine and runs fine. Please help.

A leaking gun will kill all the pressure. You may need to repair or replace the gun ... Briggs & Stratton Pressure Washers

Leaking lance on Bosch 1500SI

... Pressure Washers

Glacier Bay bathroom faucet - 2 handle leaks

See if the housing itself will unscrew ... Pressure Washers

Water coming out at handle on the lance

... Pressure Washers

Karsher electric; leaks at trigger handle...

... Karcher 1750 psi Electric Pressure Washer

Leaks from handle

If your dishwasher leaks, check these:Main tub sealDoor gasket or sealWater-inlet valveHosesMain tub sealNote… If the main motor of your dishwasher is mounted vertically, beneath the center bottom of the dis ... Danby DDW1805W Designer Series Free-Standing Dishwasher

1800 simoniz pressure handle leaking

... Pressure Washers

Excessive leaking on gun handle

The pressure comes from very sealed container and with the weather hot and cold usually the housing start to expand and let the pressure out…same with the hose. Fixing the unit may be more than the price for new one… If yo ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

My pressure washer seems to be leaking at the lance connection can anyone help?

Take the lance off and look to see if there is a missing o-ring or maybe a crack ... Karcher PSI Electric Pressure Washer

If have a Karcher K2.54, it is leaking a small amount of water from the bottom, it is less powerfull than before in terms of water pressure from the lance.

... Karcher Pressure Washers

My Karcher K730 MXS pressure washer was leaking water out of the rear of the gun handle. I bought a replacement hand gun and the new gun is doing exactly the same!

... Karcher Pressure Washers

I have a Karcher K4 130 and when you take the pressure off the lance it does not turn off, and water leakes out of the bottom of the casing. Can you help

... Karcher PSI Electric Pressure Washer

No pressure handle leaks .have no pressure

The handle needs replacing, usually these only last 1-2 years, rubber o-ring breaks down in the handle, it can be replaced but a good chance it will still leak. You won't have good pressure until the leak is fixed. I would say the pump is doing it's ... Karcher K 593 M Electric Pressure Washer

When I switch my karcher k4.97 washer on it just sits and pulsates(on off on off etc.)When I squeeze the trigger it runs perfect,but emits a very low pressure.Then when I release the trigger it reverts back to pulsating. I have tried the popular fixes like cleaning lances,filters,making sure its not airlocked etc.I have even fitted new parts(seals to the pump etc).There are no leaks what so ever.

You have an internal crack in the out let head of the machine very comon in thease machine and not expencive to fix ... Alfred Karcher K 5.93 M Electric Pressure Washer

I have no pressure and the wand leaks from the handle. This is the electric model.

... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0551 seconds