Having problems with your Dishwashers ?

My CANDY CDF 312A, has both 1/2 and R32 butons flashing and it doesn't reset. I read that it could be the motherboard. Can it be? Modulo SELCO 41008097.


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My CANDY CDF 312A, has both 1/2 and R32 butons flashing and it doesn't reset. I read that it could be the motherboard. Can it be? Modulo SELCO 41008097.


... Dishwashers

I have a GE Profile Dishwasher, Model# PDW7880J03SS that doesnt dry the dishes. I pulled out the dishwasher and checked the heating element for continuity with my ohm meter and got a closed circuit reading. I tested the voltage going to the heating element and got a 124V reading. However the dishes are still soaking wet after the drying cycle. What am i missing, what else could be wrong with the machine that the dishes won't dry at all?


Hi\015\012\015\012Check if the dishwasher is draining and filling properly is water temperature. Water temperature should be between 120 and 140 F. If water is not hot enough then heating element has gone bad, to check the element you'll ... Dishwashers

When we turn on the dishwasher there is no water entering the appliance..then it cycles to drain the water and I reset it so the pump doesnt burnout...what could this possibly be and is there some troubleshooting I can do before I call a repairman..the dishwasher has a touchpad front...by the way..the water is turned on..


... Maytag Dishwasher

I have a neff dishwasher that is maybe 5 years old. im pretty sure there is nothing wrong with it as it was working perfectly fine before i had a plumbing problem a few days ago. after the plumbing problem was fixed the dishwasher doesnt seem to want to fill any longer. it sounds like it wants to work but its just not filling and going thru the cycle. does it just need to be reset or something? im not sure of the model number as ive misplaced the directions for it. could you please help? by the


Look for the connection from the valve to the inlet of diswasher. Check the hot water valve to be on. It is probably closed when anyone working on the plumping. Good luck. ... Neff 24 in. S5443X2 Built-in Dishwasher

I own 2 model KUDS01FLSS1 KitchenAid Superba Dishwashers. The first unit had the clean light blinking so I read the post below and reset it. I thought everything was fine but half way during the cyc


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

My Frigidaire FDB956RBC0 has been having trouble resetting on the control panel for a new load. At first I could push several buttons or wait a little bit for it to reset then I could push start. Now I have to open the front panel & pull out a yellow & white plug, then plug it back in to reset the buttons for a new load.


... Frigidaire FDB956RB Built-in Dishwasher

I cant reset the dish washer is operating in 11 minutes which is rinse only??? I have turned it off, but it doesnt reset. can you please let me know how to reset it?


The reason for the dishwasher to default to Rinse only cycle is likely the heater is faulty. Does this happen with both the drawers?Also make sure the top panel switches are clean. Use a damp clean cloth and wipe the top panel inside drawer. ... Fisher and Paykel DD605SS Stainless Steel Dishwasher

Kuds30fxss Recently my Kitchen Aid dishwasher, Model No. KUDS30FXSS, began to cease washing and begin draining after only a few minutes of washing. I have been searching for the "reset sequence" as I know that most appliances have a sequence of buttons you can press on their control panel in order to reset any faults in the system, but I have been unsuccessful. Could someone please tell me what the reset sequence is, and if possible, what another solution to my problem may be. I have already


... KitchenAid KUDS30FXSS Builtin Dishwasher

Blanco dishwasher Hi. Saw your answer on the Blanco dishwasher. We have same problem. Dishwasher makes all the pump sounds it used to, but does not start to drain at cycle start, and then no water comes in. read the manual again and think we may have been washing up - ie sinks plugged. Could this have triggered something. You mentioned something about a "micro switch" could you tell me where would this be?. We have a BFDW 650 S. Thanks, Angie


... Frigidaire 24 in. FDB126RB Built-in Dishwasher

Ld-1416T I have an LG LD-1416T dishwasher and the lower spray arm does not turn. The top arm turns and the top rack is washed well. I pulled everyting out and cleaned all the filters (which weren't that dirty) but still no luck. I could only get so much stuff out to clean before it looked like to go any further, I would need to gain access through the bottom. Are there more filters in the motor area which might need cleaning? I read that it could be the vario motor. Can I test this? and if s


If you have one spray bar working then there is enough pressure. There is only one pump. So you should check the spray bar to see if it is plugged. Also check the seals to see if they are bad. ... LG Dishwashers

I have a Breamar ducted heater with Spectrolink controller. Recently the controller every day the Reset word flashes on the panel, I then reset it and the heater starts working again. Why is this happening so regularly and what could I do about it.


... Dishwashers

I have KUDK01ILBS6 kitchenaid dishwasher. Last week the cancel light kept flashing and I could not reset. Finally reset worked, but now dishwahser stops washing as soon as I start it. Do I need a new electronic control assemby?


... KitchenAid Dishwashers

My kenmore 587.1516 dishwasher has a constant blinking "sani rinse". It will not run at all, before I could push other buttons and it would run. I have disconnect the power for a few seconds in the hope it would reset, but no luck. Is there anything I could do to solve this problem?


... Kenmore Dishwashers

Hi, i have a hotpoint fdw60 dishwasher, i went to programme it and it did a long bleep and skipped straight to ''eco'' but wont let me either reset or start, nothing happens !!! could you possibly give me any hints or advice on what could be the problem or how to fix it ? many thanks


Try holding down the start button until you get 3/4 bleeps that used to work for me ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hi! My Bosch began by tripping the breaker during the cycle (several times if I could get it to reset) and now will not start at all. Even when the dishwasher is off I cannot reset the breaker unless I kind of move the machine around a bit. Sometimes it pops the breaker just closing the door...


HelloWelcome to Fixya.Based on your post,"...Even when the dishwasher is off I cannot reset the breaker unless I kind of move the machine ... Bosch SHU9915UC Dishwasher

My electrolux dish washer model eidw6105gso stopped before it completed the cycle. All the selection lights were flashing and i could not get any functions to change. I killed the power at the breaker to try to reset and that didn't work either. I removed the panel on the front on the bottom to see if there was a reset button and found another display that is showing a light on the turbidity location. what is this and what might i do to get my washer back working?


... Electrolux Dishwashers

I set my dishwasher to pots and pans to run a dishwasher cleaner, and now when I push the auto button, the time reads 2hrs. instead of the 93 mins. it always read before. How do I reset the auto button to the way it came?


... Maytag MDB7100AWB Dishwasher

Whirlpool dishwasher Quiet Partner II DU1100XTPQ7 Mine runs but will not drain. Took it apart and cleaned out as much as I could around the trap, but could not figure out how to pull out the sump and seal. I believe it may be clogged but need to know how to pull it out or possibly reset it so it will drain.


I have a simular problem but everything quit working even the lights. Is there a reset button. Ive checked to make sure there is power supplied to the dishwaher. Please help. ... Dishwashers

My miele diswasher seems to be stuck on rinse cycle and will not advance...keeps draining and refilling. Can't figure out how to reset and restart new cycle, to clear the snag. What's going on? I have cleaned all the filters in bottom of unit per operating manual. Wish I still had my GE, where you could reset the unit...no button to do that on this overpriced unit.


Sounds like a broken timer. If it's a rotary dial, they're not too bad to change.... ... Miele Slimline G832SCi Built-in Dishwasher

I have a Neff s4457n0gb/32 dishwasher that will not complete the cycle as it finishes on 0:01 minutes remaining on rinse and not moving to drying. I have to press the reset to clear the display to 0:00. If you've any idea how I can correct this problem that would be most helpful.


... Neff 24 in. S4457 Built-in Dishwasher

I have a Bosh Logic dishwasher SGS65L12GB/04 The other day it got to 1 min left and would not stop pumping out water and continued even with the door open. After 5 mins playing around it started working again for a further 2 washes. Now when switched on the pump for pumping out the water works continuously. Reset it time seem to count down but does not do anything reset time goes to 0 and beeps but still the pump runs even with the door open. all buttons seem to work fine but no washing and pu


Hi Jonathan,\015\012\015\012Welcome to FixYa.\015\012\015\012Your float may have got stuck or it's possible that you have water leaking into the bottom of the washer. In the bottom of the wash compartment, next to the drain yo ... Bosch Dishwashers

Machine doesnt start . when on button is pushed and regular wash button is pushed it goes to agent and cycle is at 0 flashing (both 0 and agent lites).have tried to shut it off and main switch and turned it on and off a few times. and still the same


Because the timer controls many operations, a faulty timer can cause many problems. The timer is a complex component, so you shouldn't attempt a do-it-yourself repair. Test the timer with a VOM set to the RX1 scale. To gain access to the timer, ... Bosch Dishwashers

GE Quiet Power 3 dishwasher stuck on rinse cycle. Pressing reset doesnt work, trying to start wash cycle doesnt do anything. Any ideas?


... GE Dishwashers

Bosch D/W model # SHU9955UC. The drain motor will not stop running. Ran the reset sequence on the panel. Display reset to "0" minutes. Power cycled the D/W and when powered back on the drain motor started up again. What do I do ?


Hi ....This is a common problem. Remove the kick plate you will see the white base which also is a tray to collect leaks or backups. Reach your fingers over the top of tray and feel for water/wetness,if so safety switch has been activated and pump wi ... Bosch SHU9955UC Built-in Dishwasher

Doesnt fill with water, leftover detergent, what could it be?


... GE PowerScrub GSD2100N Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0771 seconds