Having problems with your Dishwashers ?
Aeg favorit power button - Dishwashers
Repair Help & Product Troubleshooting for Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Our AEG Favorit 50620 dishwasher won't start. When I push the power button, the power light comes on, but none of the other lights. Pushing the function buttons has no effect. The door is fully closed, and it was working perfectly before. I have tried turning it off and on, unplugging it etc. Nothing works. Interestingly, if you push more than one function button at the same time, some of the function lights come on, but then when you try to start the cycle it still won't work. Help!
... AEG 24 in. Favorit 40650 Free-Standing Dishwasher
AEG Favorit 6040 Dishwasher has continuous tone (from Pump?) even when switched off at the power button. It cannot be set to any programme.It overflowed some froth when put on a recent cleaning 'phantom wash'. Please help, Chris.
This sounds like the anti flood system has triggered. This does put the washer on a pump out mode and the outlet pump runs all the time. The trigger device is a polystireene slab in plastic bracket with miro switch at the bottom of the washer. Dry th ... AEG 23 in. Favorit 50750Vi Built-in Dishwasher
Aeg favorit power button - Dishwashers
AEG Favorit 80820 dishwasher tablet door opens as soon as switched on and door closed. When you put the power on and select a wash and then close the door the small grey dishwasher tablet inside the door can be heard to open as soon as the door is closed. Normally this door remains closed until asked to opened automatically by the dishwasher at the correct point in the selected wash program.
... AEG 24 in. Favorit 80820 Free-standing Dishwasher
I have a AEG OKO_ FAVORIT 4040 dishwasher which has had very little use despite its age. The problem is that the switch that detects an over-fill is activated all the time and the pump continues to try and empty an already empty dishwasher even when the main switch is turned off, the only way to stop this is to turn it off at the power point I have had some sucess deactivating this switch by tilting the dishwasher forwards however because of the angle it sometimes overflows when filling. The ma
Hi there,This could be a problem on the control board of the unit. It could be faulty and need replacement or you may try to access the board and try to clean it.Make sure upon doing this all electrical connection to the unit ... Dishwashers
Our AEG Favorit Sensorlogic dishwasher has had no power to it
If u just reinstalled mke sure you removed the blancking plug from the drain spigot . simple but happens a lot. ... AEG 23 in. Favorit 50750Vi Built-in Dishwasher
Powder solenoid I hav e an AEG Favorit 50700 sensorlogic dishwasher. As soon as I switch on, before even selecting a programme, the solenoid to operate the powder dispenser door operates, then stays activated until I remove power. I've taken the door liner off and the PCB looks OK - but I guess whatever powers up this solenoid has gone short circuit. Any idea what it might be or might look like?
Probably the main module ie the pcb you were looking at ... AEG 24 in. Favorit 50730W Free-standing Dishwasher
My AEG Favorit 86011 dishwasher keeps tripping the power off- sometimes it works but then trips the power when you open the door mid-cycle. There is no obvious blockage in the draining pipe. Any ideas what could be causing the issue?
... AEG 23 in. Favorit 86070Vi Built-In Dishwasher
I have an AEG Oko Favorit 8081 dishwasher and it appears that there is no power getting to it [nothing light up] I have checked with a voltmeter and power is getting to the back of the machine. Is there a reset button/cct breaker/fuse somewhere in the washer.
There is no fuse or breaker in appliance.\015\012take outer door panel off and check for breakage in the wiring loom where it enters the bottom of the door. check also the door interlock is operating ok ... Dishwashers
I have AEG Favorit 80800u dishwasher type 45_1 VCD 24 which keeps dropping power off after 10 minutes of operation. No Leds nor error codes. Power enters the unit properly.
Have you monitored the the power while the machine is running? Does the power supply receive constant voltage? Or does the power supply shut off?Can you tell where the power begins and ends? That kind of testing will be necessary to find out. ... Dishwashers
My dishwasher AEG favorit 525 worked perfectly but has been out of action for over a year. yesterday when I tried to use it, the on button is on continuously and no water is pumped into the machine. yes the water is on. the program button is also rotating as the programs change but no water comes in and I am not sure whether it will pump water out as I have not yet got there. please help.
Hi\015\012\015\012The issue seems to with the pressure switch that is bad and\015\012so won't allow the water to flow inside the unit. You can take it apart to\015\012check this. Hope this helps...please post back for further assistance. ... Dishwashers
AEG Favorit 45250Vi dishwasher. Following a power failure, the unit won't restart, although power is at the unit. No lights sgow. Is there a fuse or resettable trip in the unit? If so, there is it. (If not, why not!)
... AEG 21 in. Favorit 45250Vi Built-In Dishwasher
AEG Favorit 675 Once you press the on button, the inlet solonoid opens and the container below the dishwasher fills but nothing happens after that.I'am an electrical contractor who would love a circuit diagram to this model so i can follow the squence of operation, it is my own dishwasher.
See this manualpag 19-21http://www.serviceforce.co.uk/pdfs/U04142.pdfSergio ... Dishwashers
My Delonghi Dishwasher keeps turning off. The dishwasher is turned on at the power point. The water is turned on. Okay When I press the POWER botton on the front it wont stay on. I have to keep my finger on the POWER button and then press the START button for washer to work. If I do this it will then pump out any water in the bottom and start to work. ***BUT when you take your finger of the POWER button the washer just turns off and stops working. Do you have any idea what could be the problem p
Yes, the power button is faulty. by pressing the power button forcefully, you are in effect allowing the contacts to close. Replace it. ... Dishwashers
AEG Favorite Compact 525. The pump runs continuously even when the on/off button is pressed. Tho only way to stop it is to turn the power off at the socket/plug. any ideas
This seems like the anti flood system (polystireen float / micro switch) at the base of the washer is triggered,\\. This puts the washer in pump out mode and stops inlet of water via the inlet solinoid. Dry the water on the base and then check for an ... AEG 24 in. Favorit 40850 Free-standing Dishwasher
AEG Favorite Compact 525 Dishwasher. The pump runs continuously even when the on/off button is pressed. any ideas
This is caused by the Anti-Flood device at the base of the machiene being activated. This device detects water leaks and is a polystireene float / micro switch that puts the machiene in pump out mode only. You need to determine where the leak comes f ... AEG 24 in. Favorit 40850 Free-standing Dishwasher
My AEG Favorit 40740 won't start. When I press the power button the light goes on but nothing more than that. What could that be?
Hi I have an AEG Oko Favorit Sensorlogic dishwasher, unable to read the numbers as it is approx 11 years old. I keep having problem with the on/off button not working. Have had a tradesman fix it twice now - can I do it myself rather than getting someone out? Thanks, G
... AEG 24 in. Favorit 60870M Free-standing Dishwasher
My AEG Oko Favorit 50750 VI built-in dishwasher has been unpredictable for a few weeks - sometimes leaving things dirty although I've run cleaning programmes and replaced the filter basket thingy - but today I have a power light on but no other lights - no programme lights and no 'end' light either. Not sure if it finished the last cycle or not. Desperate not to replace as cash is tight - is there anything obvious I might check please? Thanks..
Hi\015\012\015\012Most probably the door catch switch or the on off button is bad.\015\012Please check the link bellow..\015\012\015\012 ... AEG 23 in. Favorit 50750Vi Built-in Dishwasher
Hi, I have an AEG oko favorit 64800 and when I turn it on and select a program it doesn't work. The power light comes on and the digital screen comes on but it looks like this -- --. I try to press the buttons to select the appropriate program but nothing happens. There is no alarm code displayed in the digital box. Thanks Louise
... AEG 18 in. Favorit 64800 Free-standing Dishwasher
AEG dishwasher model Favorit 5050 When pressing the start button(on top of m/c it lights up but does not stay on
... AEG Favorit 50500 Built-in Dishwasher
AEG Favorit - model F86050UM The dishwasher was disconnected and moved whilst new timber flooring was being laid. On reconnection it was evident there was some water in the base of the unit, this was removed by tipping the unit over to drain. Now there is no power display on the door.Power outlet checked OK. Your assistance would be appreciated in this seemingly simple problem. Murray
What has happened is that you have tripped the overflow/anti flood device switch when you upended the machine. You most likely need to empty out the salt container, and to reset the antiflood give the machine a few sideways tips and try to shake fre ... AEG Dishwashers
I have an integrated AEG Favorit Sensorlogic Dishwasher. The On/off turns on and shows red but none of the programme buttons will come on such as "Intensive"
Hi,This means that you are getting Power into the machine but It is not working.Check Control Board first of all. Pull out the Door Panel, you would have access to Control Board..Do you see anything Leaked/Swelled/Burnt? ... Dishwashers
Hi. i have an AEG Oko Favorit 60750 Vi Sensorlogic dishwasher. The on/off button doesn't work (no turns the light on) so the machine doesn't start up. How can i do by myself? Thanx a lot
Hi, We have a Smeg ST 663 dishwasher that does work. However, sometimes when you want to use it and turn the power button on it beeps twice with the red light flashing and you can't get it to work or change the settings. Sometimes if we leave it for a while and try it again later it will work, but it is annoying as sometimes it won't want to work for ages and we really want our dishes cleaned! The dishwasher doesn't have many buttons on it (a power button, cycle selection button and 1/2 load
Hi,\015\012\015\012Turn machine on and press and hold the programme select button till the light goes out about 5-7 seconds see if this resets it if it does start a cycle and see what happens.Otherwise the pcb as its not responding to an ... Smeg Dishwashers