Having problems with your Dishwashers ?

Hotpoint dishwasher bf1620 not filling - Dishwashers


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hotpoint dishwasher bf1620 not filling - Dishwashers


... Dishwashers

I have a hotpoint built in automatic dishwasher model HDA3740G02SA. When my dishwasher runs all the cups on the top shelf seem to have dishwashing soap powder left in the bottom of the cups. I do not over fill the cup where you put the dish washer powder in. It seems like it isn't rinsing the glasses and cups on the top rack of the dishwasher properly. Do you know what the problem would be and how to correct it?


Make sure the arm on top isnt hitting something, each time you load it each in there and spin it to be sure it moves freely, also make sure your rinse agent container is full of rinse agent. ... Hotpoint 24 in. HDA3740G Built-in Dishwasher

Hotpoint Dishwasher Model HDA3400G02WW...dishwasher will not fill. Also the elecertic magnet will not engage. The sounds of the dishwasher are the same except the loud sound of the electric magnet engaging.


... GE Dishwashers

Hotpoint Dishwasher Model BF1620. Daily and Eco lights flash rapidly


... Frigidaire 24 in. FDBB945DC Stainless Steel Built-in Dishwasher

Hotpoint dishwasher My dishwasher is only new and its doing prewash to quick and the red light for salt refill in constantly on even though it is filled to the specific mark


... Hotpoint 24 in. DF56 Free-standing Dishwasher

My hotpoint dishwasher won't start: when I filled the reservoir with soap, it wouldn't close, so I wound the start dial once until it would close- now the start dial just spins and the dishwasher wont start


... Hotpoint Dishwashers

Dishwasher is not filling up with water - Hotpoint Dishwashers


Hi\015\012 \015\012 \015\012When the Dishwasher is not filling in, you'll need to check for the water inlet valve, the filter screen and the float switch/assembly. Also check for the float asse ... Hotpoint Dishwashers

My hotpoint dishwasher wont go past filling up, but its doesnt fill!!


Hi,Here is a tip that will help you to find out why water will not come into the dishwasher... \012Dishwasher ... Hotpoint 23 in. BFV62 Built-in Dishwasher

I have a hotpoint HDA3400 dishwasher and it will not fill with any water. It goes through the cycles but will not fill with any water no matter what cycle I start it on


Hi\015\012\015\012\015\012This is happening due a a faulty fill valve or due to blockage in fill hose. Please check the water inlet hose, try removing it and check for any blockages. If the inlet water hose is fine then you'll need ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

Hotpoint aquarius dfw30 not filling - Hotpoint 24 in. FDW60 Free-standing Dishwasher


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Dishwasher fills then drains immediately - Hotpoint Dishwashers


... Hotpoint Dishwashers

Hotpoint BF1620 Dishwasher, only one light is flashing, not able to change from that programme. button to change program will not respond so dishwasher will not work.Help. Single Mum with screwdriver! what can I do?


Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete, or poorly ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Dishwasher won't fill will with water - Hotpoint 24 in. HDA1000Z Built-in Dishwasher


Water fills once in a while on DW40 can a new selonoide by fiited ... Hotpoint 24 in. HDA1000Z Built-in Dishwasher

Hotpoint dwg60 does not fill with water - Hotpoint 24 in. DF55 Free-standing Dishwasher


If the water overflow circuit has been triggered then it can lock the inlet valve. Check if the float device at the base of dishwasher is moving up and down when pressed.\015\012\015\012Alternatively, the inlet valve may be faulty. ... Hotpoint 24 in. DF55 Free-standing Dishwasher

Hotpoint Dishwasher BF1620 blew the main fuse circuit in fuse box during mid cycle wash? Re-set main power fuse circuit but now as soon as Dishwasher switched on immediately blows main kitchen power fuse in fuse box? What is problem?


This is happening because you have a very bad fault, a Phase to Earth short, problem. Leave machine UNPLUGGED, Breaker/Fuses OUT. do NOT use it, nor Touch it, It is possible to get severe electric shock. PLEASE get a registered serviceman to inspec ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Hotpoint dishwasher bf1620 - 1st light indicator (heavy soil)flashing. information from hotpoint and manual useless


I have had this problem twice now and the problem is water in the drip tray. The guys at Hotpoint eventually told me what the light meant as he wanted me to have an engineer and the manual does not say.!!\015\012\015\012\015\012So i ... Dishwashers

Hotpoint BF1620 dishwasher will not turn off only at socket. noise is like the continual pump of emptying dishwasher. tries changing programme, turning on off, keeps turning itself on and pumping


There is a malfunction of the washer controller. Hence the mode is not shifting off from the pump as it does not end the programme. Hence you will have to confirm the output of the controller if the drive is short or functioning by itself. Since even ... Hotpoint Dishwashers

Hotpoint Dishwasher BF1620


Ive not worked on hotpoint dishwashers,does the dishwasher drain? at the point it plays up is it supposed to be filling or washing.check the filters inlet valve etc.do you still have the manual for the dishwasher.the flashing lights are most likley a ... Dishwashers

Hotpoint BF1620 Integrated dishwasher not working


Lets try the following hope this works\015\012\015\0121.- unplug the appliance, isolate it from the electric supply.\015\0122.- Remove the kitchen unit plinth and check inside the inspection panels below the door to see if there is ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Good morning! I have a hotpoint built in electronic paneled dishwasher that fills up w/ water when off. Water slowly seeps in from bottom and I have to syphon it out (yuck). Electronic panel beeps, that there is too much water. can you help me?


The water inlet valve is most likely bad and needs to be replaced, especially if it fills up over a long period of time. Easy to replace. ... Dishwashers

Flashing lights I have a hotpoint dwf40p ser no ls12-ev03 it pumps fills then the wash light and the drying lights flash and dishwasher stops with no further progress


... Hotpoint 24 in. DWF32P Free-standing Dishwasher

HOTPOINT BF1620 1ST AND 2ND FLASHING LIGHTS DISHWASHER NOT DRAINING POROPERLY EITHER


Disconnect from mains take off water pump from under the washer and bench test (apply 240v to the contacts). If the pump turns and is OK refit it. |The next thing to do is replace the control panel behind the front door. the part you need is ... Hotpoint 23 in. BFI62 Built-in Dishwasher

We have an Hotpoint FDW70 Dishwasher that for some time has had an A10 fault which although stops the machine some times 70% of the time it does a full cycle. However it is now tripping out the electric at the mains. It is not RCD protected, but does not blow it's own 13amp fuse or that of the fused extention lead it is pluged in to. Tends to blow after about 5 minutes. I know about the fault code A10 being 'Fill Valve Triac' but as not an engineer what is that? and what parts are needed and or


Hi the fill valve triac is the plastic vlave that the inlet hose connects to you can get them for about £10 you reset the machine after replacing it by switching it on, pressing the power button leaving it off for about a minute then switching ... Dishwashers

Hotpoint aquarrius fdf780 dishwasher starts its cycle then stops showing a fault code of (A 8) . there seems to be no water filling it up ?


... Dishwashers

Hotpoint bf1620 dishwasher flashing light fault


Hi ,When this happens I keep the button with the letter "P" Pressed until the fault lifgt resets,my row of buttons is inside the top edge of the unit. ... Hotpoint 23 in. BF50 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1309 seconds