Having problems with your Dishwashers ?

My Maytag Dishwasher MDBH750AWW will not turn on. Pressing the key pad on the top front does not activate the controls. I traced the wiring and found it is active in the door latch assembly, which I recently replaced. Question: 1) If I purchase a new Control Panel exterior white key pad, which is linked to the interior Control Board, should that solve the problem? Or,2) if I purchase a new exterior Control Panel finger touch pad, and an interior Control Board, will that solve the proble


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Maytag Dishwasher MDBH750AWW will not turn on. Pressing the key pad on the top front does not activate the controls. I traced the wiring and found it is active in the door latch assembly, which I recently replaced. Question: 1) If I purchase a new Control Panel exterior white key pad, which is linked to the interior Control Board, should that solve the problem? Or,2) if I purchase a new exterior Control Panel finger touch pad, and an interior Control Board, will that solve the proble


... Dishwashers

I have unresponsive touch pad, blinks, but the dishwasher does not come on. do I need to replace the control board? or the touch pad? it's a new machine and we have only used about 10 times since we had it. This is the second dishwasher we have purchased. Could it be there's a power serge burning out the boards? Should DW be on a GCFI outlet?


If it's new(less than a year old) it should be under manufacturers warranty. if not under warranty b4 replacing any parts try killing the breaker for a minute or two ... GE 24 in. GLD5860LSS Stainless Still Built-in Dishwasher

KitchenAid KUDC25CH Dishwasher Just installed a new control board, last week after some lengthy emails we decided it was probably the control board , control board in now in, as far as I know the dishwasher cycles thru all three of the small lite rinse buttons ad it may have finished completely, there wasno water in the bottom of the washer so all was pumped out and the dishs were dry......the large rinse button on the panel is blinking. I open and close the door but the light contiues to blink


The system does not allow me to view what other consultants have suggested to you about the problem with your dishwasher.\015\012\015\012Before you try anything else, get a Finish dishwasher cleaner kit from the supermarket and run the di ... Dishwashers

Model # KUDSO1DLSS1 Kitchenais dishwasher - had a burnt electric smell coming from the area of the touch pad (not the vent). Did "some" research and decided to replace the control board - smell went away - ran 3-4 cycles over a few days and then - no lights - tried a new control board (thinking the old defective) - nothing - replaced the thermal fuse - nothing - what next????


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

I have a bosch dishwasher model classxx maxx freedom performance sgs43co2gb/35. the machine when turned on doesnt stop,so i checked the control panel and there was a black ring of soot,before i purchase a new control panel,what would cause this to happen? please help!!!


I think your model was part of the recall and the repair is free to fix call bosch and they will take of ity. they need to know the model asnd serial number to know if it is one of the recall ... Bosch Dishwashers

My Maytag Dishwasher MDB7601AWB is not working. The Rinse Only and Tuff Scrub Plus lights are the only ones lit and the control pad is unresponsive when pressed. Do I need a new control panel or just a touch pad?


... Maytag Dishwashers

I have a hobart LX18C. I purchased a new control board and as I found out its factory set to the h model. How do I change the board over to the c model. How do I program the machine for the different wash cycle times, I have one that is working but its on the 140s. cycle and only heats the water to 80 degrees. I see the push buttons on the control and wonder what they are for.


Here is a Hobart link that may help. https://feg.hobartcorp.com/resourcecenter/ProductDocumentation/F18615%20Rev%20I.PDF ... Hobart 24 in. LXIH-3 Built-in Dishwasher

I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?


If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher

Have a LDS 5811WW dishwasher that will not power up. Do not have any panel lights or "ding" noises. Have ac volatage to the unit. Red LED light on controller board not lit. Tried new board. Still no LED light or panel lights.


Which control board have you replaced. There are two boards in the panel. See ... LG 24 in. LDS 5811 Built-in Dishwasher

Fridgdaire dishwasher, control panel dead, no lights, new control board, checked all sensors, 120VAC present as it should be....now what? Model FDB2410LDC3


Hi,Check the Door Switch and Timer.I have seen if the Door switch is Bad, your dishwasher would not run. Check and let me know.The guide How to Test Door Switch is :-http://www.partselect.com/repair.asp ... Frigidaire Dishwashers

Kitchenaid KUDK03IT has just had it's second control board in 90 days stop working. New one is ordered, but I wonder why it is going through control boards.


... KitchenAid KUDK03ITBK Built-in Dishwasher

PLD2560LCC1 Frigidaire Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.


... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

Pld2560lcc1 Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.


Pulled the touch pad, go after the middle third with a very small screw driver, cleaned the flex circut with contact cleaner\015\012\015\012powered up fine seems to be working again ... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

The normal light on my Whirlpool DU1101XTPQ7 is blinking. Service company installed a new circuit board but this did not solve the problem. Now they are saying it's the control panel (after the third visit to my home to fix this).


A blinking indicator light means the thouch key that geos with that light is stuck. So yes you need a control panel since the touch pad assembly is installed on it at the factory. I would have them put your old control board in with the new touch pad ... Dishwashers

HI.. I purchased a drm57 washer from Futureshop and within 2 weeks the letters were wearing off the control panel. http://www.thebuckleycrew.com/downloads/dw.jpg Future shop replaced it yesterday and now if i rub the letters on the new one, i see ink smearing on it also. obviously it's going to look the same. any advice? thx Eric


Samsung changed the way they seal the lettering now. You need another brand new control panel ... Samsung 24 in. DB5710DT Stainless Steel Built-in Dishwasher

I have a Kenmore Elite Ultra Wash HE. Model #66513122K701. Serial #FY0310281. Purchased New 1/31/09. It only works for a full wash cycle on on 1 hour wash. Super Wash and Normal wash both stop mid cycle and leave dishes sopping, dipping wet and with green light blinking. Been doing this almost its entire life...has ahd control panel replaced once under warranty...but if it is a factory defect...they probably just repaced it with another defective part...what to do? What should I do.


... Kenmore Dishwashers

The normal light is flashing on the panel but unit will not run. I tried a new control board and bi-metal fuse. The light is still flashing and dishwasher will not do anything. Kitchenaid model kud1021rbso. Any help would be greatly appreciated.


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Hi silverdragon, re the dishlex 302 not heating or drying Have replaced heating element but unfortunately still cold. If the control panel has not shorted which it hadn't before, do you have any suggestions. My hubby would rather wait before buying a new dishwasher, but I don't want to throw good money after bad. Is there anyone you can suggest who would be able to check out the circuit board to see if i have missed anything.


Hi\015\012\015\012Check the two thermostats located at the inside bottom front\015\012panel of the dishwasher, if any one of them goes bad it won't heat. Hope this\015\012helps...please post back for further assistance.\015\012\015\ ... Dishwashers

No water. replaced solenoid for inlet water motor runs but no water flow I think it's the control panel (touch button) is shorted out. Whats the cost of a new board.


You might have to call up GE service support to confirm. check this link:\012\012www.geappliances.com \012\012check also for spares, post your queries: ... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher

I have a Model DW95FI/1805 dishwasher that needs a new control panel and overlay. Is this something that is fairly simple to put in and can I purchase the parts myself.


The sad reality is the cost is almost as much as a new dishwasher. The good news is a new dishwasher will be a whole lot quieter, cheaper to operate and do a better job. ... Dishwashers

CONTROL PANEL HAS IS FRIED, WHERE CAN I PURCHASE A NEW ONE.


... Siemens 24 in. SL84A305UC Built-in Dishwasher

Kenmore undercounter dishwasher model 66517019400 wont start..I want to purchase a new control board do you think this is the problem? normal cycle light comes on, cancel button works, heat on button works, just wont start ??


It might not start because the water solenoid is failed, or the water level sensor is failed.\015\012\015\012You have to use a meter to test these components first. Put your voltmeter on the two leads going to the water solenoid, and psuh ... Kenmore Dishwashers

I have a dishlex 750 eco. The control panel has not lights, but the internal dishwasher light still works. The repair guy said it needs a new circuit board, and not worth fixing. He could sell a reco one cheaper, although this machine is old it has hardly done any work. any thoughts? thanks dave..


The tech is quite correct, with this unit, the best thing to do is nothing. You need to put any prospective money that was going to be used for repair into NEW one with a full warranty, that way you can be sure of a reliable unit.\015\012\015\ ... Dishwashers

I have a whirlpool DU1055XTVS0 stainless steel dishwasher. The display is stuck on normal wash and the start light flashes. You cannot change any of the functions. Do I need a new control panel or circuit board?


... Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

Maytag model MDB5600AWB replaced faulty control panel started and lit up like it is supposed to do started wash with glisten cleaner and when I tried to cancel drying cycle panel or board would not respond, waited till unit was finished and control panel blinked and went dark , bad control board?


... Maytag 24 in. MDB5651A Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1109 seconds