Having problems with your Dishwashers ?

Dishwasher rear propeller

\015 How to replace rear propeller\015

Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher rear propeller


... Dishwashers

Dishwasher leaking at rear - Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher


... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

I have a BOSCH dishwasher moded SHU66C06uc/14. With the dishwasher turned on the water just trickles into the tub. There does not seem to be enough force in order to propel the spray jets. I have checked the water supply and do not have any kinks or blockage.


... Bosch Dishwashers

Hi there, Ok, i think i'm getting close to solving this problem. I have an LG dishwasher- Model # LDS 5811ST. I have stripped it down and clean all hoses etc. It is running fine through all the cycles. The only problem is that it has no water pressure. In other words water is pumping into the dishwasher but it's like there is no pressure behind it to force it through the holes in the propellers so it's just kind of dumping water out as opposed to having any forced pressure. Hope this makes se


Try adding some more water to the machine after it has done the fill cycle do not over fill it. if there is no change in the performance the you need to replace the main wash motor.\015\012if there is achange the you need to change the fill val ... Dishwashers

Dishwasher is leaking from the rear, not the hoses its in the middle its a toshiba tabletop dishwasher


The pump could be leaking that is were the pump sits ... Dishwashers

The dishwasher was leaking from underneath a metal bracket underneath the rear of the washer. I discovered that one of the plastic "sleeves" which the screw mount into was broken loose from the body of the dishwasher, creating a hole and allowing the leak - almost like it was just overtightened at the factory. Is this repariable?


It should be . use a good grade of 2 part epoxy putty . clean the hole and patch should be correct . have done this on many tanks. that have burned holes in them. .. hope this helped **** . feed back pls .. ... Kenmore 15129 Built-in Dishwasher

Hi there, Ok, i think i'm getting close to solving this problem. I have an LG dishwasher- Model # LDS 5811ST. I have stripped it down and clean all hoses etc. It is running fine through all the cycles. The only problem is that it has no water pressure. In other words water is pumping into the dishwasher but it's like there is no pressure behind it to force it through the holes in the propellers so it's just kind of dumping water out as opposed to having any forced pressure. Hope this makes se


Water will flow out of your inlet pressure. The pump takes from your machine to spray. The same water is circulated during wash!Hence try the method I have informed you. If it is a micro controller problem you have to contact the service ... Dishwashers

Bosch Dishwasher Dishwasher is about 6 years old. It recently stopped cleaning the top rack of dishes. It is getting water to the top propeller, but not with enough force to make it spin. I have checked the tubes running up top and they are not clogged. Could the pump be going bad?


Your filters need to be replaced. it's a 10 minutes work ... Bosch 24 in. SHU43 Built-in Dishwasher

How do I replace the water inlet valve on a Bosch dishwasher? I have done this on other dishwashers, but the rear of the Bosch valve appears inaccessible.


The easiest way I found to replace the valve is to pull the dishwasher out of opening and lay it on its back. When it is on its back you can get at the valve no problem. ... Bosch 24 in. SHU53 Built-in Dishwasher

Miele Diamante G 2150 SCU Dishwasher problem ----The program cycle indicators "Rinse", "Drying" and "End" flash at the same time. The drain pump is running when the door is open. I have reset the power and cleaned the drain pump and non return valve and Spun the propeller several times in both directions to check for obstructions. Still has the same problem. Water is being drained continuously even with power switch on dishwasher turned off.. Had to shut the breaker off to get it to stop. A


Hi\015\012\015\012Plugged system or a jammed drain pump can cause these issues, also make sure the drain hose is not blocked. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remo ... Dishwashers

My dishwasher sounds like a propeller plane! - Kenmore Dishwashers


... Kenmore Dishwashers

Kenmore dishwasher part # 3384545 wont drain, connection to sink draing is clear, no access to rear of dishwasher


... Kenmore Dishwashers

I have a Whisper Quiet dishwasher and the top propeller (water jets) have broken off. Is this something I can fix myself?


What is your model number is then we can get started then okay ... KitchenAid Dishwashers

Cannot adjust rear legs of dishwasher


... Dishwashers

Siemens SL84A 302UC dishwasher - Dishes not getting clean, it appears that there isn't enough water pressure to propel the jets


... Dishwashers

Adjusting rear feet on a beko dishwasher


If they are threaded then there may be a lock nut to loosen off before you can turn them\012 if they are not threaded then they will not be adjustable ... Beko Dishwashers

How to adjust the rear leg on a Bosch dishwasher


... Bosch Dishwashers

About 3 years ago i bought a kenmore model 665.16264400 dishwasher Never did clean very well.Now upper rack does NOT clean at all. Arm rotates freely,water inlet tube appears clear at end and engages at rear


You probably have a clogged water feed tube. Remove the lower wash are assembly and the water feed tube and vacuum out with a wet dry vacuum. I had the same problem and it was fixed this way. ... Dishwashers

Leaky Tub our dishwasher was leaking quite a bit. i checked all the hoses, and connections, it turns out that there were two screws from underneath protruding into the tub, near the rear on either side. If any one knows if the tub could be fixed or replaced could you let me know? Also if this was a manufacturing problem shouldn't sears be responsible?


Are you sure that water leaking out from these two points.\015\012If this is the reason for the leaking, it's absolutely a manufacturing problem and you should forward your problem to Sears to take care fot it !!\015\012Generally,this problem could b ... Kenmore 24 in. 17019 Built-in Dishwasher

Drain pump propeller does not turn smoothly - Miele 24 in. G881SCI Built-in Dishwasher


... Miele 24 in. G881SCI Built-in Dishwasher

The propeller on the top of my dishwasher came off and i can't figure out how to put it back on. There appears to be a ring inside the opening on the ceiling where the propellor would attach. I have a feeling that a piece is missing. Can you help


... Frigidaire Dishwashers

Water stays in dishwasher goes through cycle but motor not going if turn propelers at back of motor pump kicks in for few seconds.is it pump motor ,is there brushes in these motors


Yes there are brushes in dishwasher motors it sounds like they are either worn out or stuck try tapping motor with the wooden end of a hammer at the rear of motor as brushes clog up as they wear hope this helps ... Tricity Bendix 24 in. BDW53 Free-standing Dishwasher

My bosch excel dishwasher has the following fault: start the cycle, water starts to fill but then check water light comes on and it then starts to empty again. Pump then keeps going. I have checked the hose and even swapped it round with my washing machine one but this makes no difference. I have cleaned all the filters and taken off the cover to check the 'propeller' as sugested in the instruction manual. But no joy - check water light still illuminated and willnot continue with cycle. - Help!!


This unit im sure has a water flowmeter that measures the water intake.. if this cannot read then the unit shuts down to avoid flooding.. \015\012it needs replacing... it is attached between the valve and the side tank or attached to the tank d ... Bosch Dishwashers

Paper jam rear door - Dishwashers


Hello. In order to clear it one often needs to use long needle nosed pliers, available at any hardware store. Just be as gentle as you can and try to remove only a couple of sheets at a time. Regards, Joe ... Dishwashers

I have a world pool gold dishwasher mod # GU2700XTSB1. My problem is that the top rack does not get clean, it seems the propeller beneath that rack doesn't spin. Any advice? Thanks, Francis


Diswasher does not drain all the water out ... Whirlpool Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1683 seconds