Having problems with your Dishwashers ?

Flashing indicator light

\015 When I try to start the dishwasher the main indicator light flashes 5 times and it won't start. What is the problem?\015

Answers :

Follow the next steps and fix it. God bless you
\012 \012 \012 \012 \012

Heating Element Assembly

\012 \012 \012 \012 \012 \012 \012 \012 \012 \012 If lights are flashing on the control panel, \012the heating element assembly might have burned out. The heating element \012assembly heats the water up to operating temperature. After a set amount\012 of time if the temperature isn't reached a light on the control panel \012might start flashing. The heating element assembly can be checked for \012continuity with an Ohm meter.\012
\012
\012 \012 \012 \012\012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012
9bfd2e8f-ddc9-416a-ab1d-8a4ccd227e33.jpg

\012 \012 \012\012 \012 \012 \012
\012 \012 \012 \012 \012

Check Fault Codes

\012 \012 \012 \012 \012 \012 \012 \012 \012 \012 If the display lights are flashing and there \012is an error code in the display window, check the wiring diagram and \012tech sheet in the dishwasher that will provide information on the fault.\012 \012
\012
\012 \012 \012 \012\012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012\012 \012 \012 \012
\012 \012 \012 \012 \012

Drain Pump

\012 \012 \012 \012 \012 \012 \012 \012 \012 \012 If lights are flashing on the control panel, \012the drain pump might not be working properly. For two-wire drain pump \012motors check them for continuity using an Ohm meter. If it's defective \012You'll need to replace it. Drain pumps are not repairable.\012
\012
\012 \012 \012 \012\012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012


\012 \012 \012\012 \012 \012 \012
\012 \012 \012 \012 \012

Touchpad and Control Panel

\012 \012 \012 \012 \012 \012 \012 \012 \012 \012 If the lights are flashing on the display the\012 entire touchpad and control panel assembly might be defective. If the \012display works but the dishwasher functions are all out of synch, or some\012 of the buttons don't respond properly the entire touchpad and control \012panel might need to be replaced.\012
\012
\012 \012 \012 \012\012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012 \012


\012 \012 \012\012 \012 \012 \012 \012 \012 \012 \012 \012

Touchpad

\012 \012 \012 \012 \012 \012 \012 \012 \012 \012 If the display lights are flickering for no \012reason, the touchpad might need to be replaced. Sometimes when the \012touchpad is defective the display lights are flashing randomly. \012
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a SMEG dishwasher. Can't find the model number on dishwasher or manual. Had two flashing lights and referred to manual - indicates a blocked filter. Cleaned that out, but now when I try to put it on "light" cycle (indicated by wineglass symbol), that light flashes (but no others as would indicate a problem).. All the other cycles work fine. Any ideas? Thank you!


Hi.If only the crystal light is flashing and no other light is on, then that is not an error code. Problem can be a temporary malfunction, or a defective control module or keypad.The delicate (crystal) light flashing with last ... Smeg 24 in. STX2 Built-in Dishwasher

Flashing light The 3rd light to the right keeps flashing. I cannot cancel the programme or move the indicator light to any other setting. When I close the door the machine does not come on, just the light keeps flashing. Any idea what the problem can be? There is no water in the machine and doesnt appear to be any blockage in the outlet pipe.


... Smeg 24 in. DWI612 Built-in Dishwasher

Ran dishwasher overnight came downstairs this morning and instead of a steady green light indicating the dishes are clean, i see a flashing green light indicating dishes are not sanitized. how do you get rid of green light.


Hi.If the dishwasher is not sanitizin that means that the machine does not detect that the water temperature required for sanitizing (120) is reached.I do not have make an model info. Most appliances will reset simply by tripp ... Dishwashers

Hello my Kenmore built-in dishwasher (model: 17352) has a flashing light as of yesterday. The "clean" light flashes 7 times then pauses then flashes 7 times continuously. I don't have the troubleshooting manual. What does this indicate?john Racette


... Kenmore 24 in. 17352 / 17354 / 17359 Built-in Dishwasher

We have a DWF A10 and the light indicator flashes 2 times i have cleaned the filters ect presses the start button and held it in but all it dose is drain out and continues to flash can you help me or


... Dishwashers

Zunussi ZDT6252 dishwasher will not start The number 3 programme light flashes and clicks and the on/off indicator light flashes. Water pressure and electricity fine and filters have been cleaned. Cycle does not start at all.


Hi. Do this. Go to your electrical panel for the house and turn off the breaker or remove the fuse for your dishwasher. Leave it off for 5 minutes. This will cause the machine to reset. After the 5 minutes pass, turn the power back on and check ... Zanussi 23 in. ZDT6252 Built-in Dishwasher

My power was out in my home briefly while my hotpoint bfv620 dishwasher was running. Once the power returned the washer's indicator lights 2 & 4 were flashing. I've tried reseting the machine, turning it off and back on and the lights remain flashing. Any thoughts?


Turn it off and give it more time than before then put it back if the flashing continues then remove the water out of the hose and check that the hose isnt blocked, check the pump if blocked , then it continues that means may be the suppply surge m ... Hotpoint Dishwashers

Lamona dishwasher hja8631 programme indicator lights not cumming on when I turn it on they all flash at the same time after 5 seconds when turning on then go off the salt level indicator is the only light that stays on what can be the problem


... Dishwashers

Currys essentials dishwasher CDW60W10 light flashes which indicates filter blocked or hose kinked according to the manual, but these are OK how do I stop the light flashing and retart the machine?


Don't buy same problem 2nd time!!!!!!!!! ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Dishwasher inoperative The lights that indicate the wash cycle are flashing along with the 6 hour delay light. I have tried to cancel the cycle but it does not work. I shut off the breaker to try and reset the operation and that does not work. The dishwasher will not work and I cannot reset or cancel the flashing operations. Kenmore Quite Guard 3 Model 587 15072200


... Kenmore 15522 Built-in Dishwasher

I have a Frigidaire Gallery dishwasher model number FDB989GFC2. All of the indicator lights on the right side are flashing (Controls lock, add-a-dish, washing, etc.). when buttons are pushed I get no response. Have tried turning off at circuit breaker for 1 hour, when powered back all lights still flashing and still no response from pushing buttons. Any ideas?


You need to rpelace the electronic control board ... Frigidaire FDB989GF Dishwasher

I HAVE A BAUMATIC D/WASHER BHD5 TYPE DW-24E1,(ABOUT 8 YEARS OLD) IT IS A WHILE SINCE LAST USED THEN 1 NIGHT AS IF IT HAD STARTED BY IT'SELF IT STARTED MAKING A BEEPING NOISE ALL 4 INDICATING LIGHTS AS WELL AS SALT AND RINSE AID WERE FLASHING HAVE SINCE TOPPED UP SALT AND RINSE AID BUT ROUGHLY 1 MINUTE AFTER STARTING IT BEGINS TO BEEP AND ALL LIGHTS FLASH. COULD YOU TELL ME THE PROBLEM. MANY THANKS


... Baumatic Dishwashers

LIGHTS FLASH Hallo, I have a Indesit dishwasher (IDL 750) and the last few weeks there is a malfunction. After 15 minutes that the wash cycle 2) had started the dishwasher stops and the first and third wash cycle phase indicator lights flash, beginning from the right. Could you help me telling me the possible cause of this malfunction. Thank you in advance Fred Tourman Athens, Greece


... Dishwashers

Kenmore model 5871526 When wash cycle is selected and start button is pressed, the wash cycle indicator, heated dry indicator and the Washing cycle indicator lights flash continuously - but the dishwasher does not start


... Kenmore Dishwashers

My GU 120 stops mid cycle and the indicator light starts blinking a humming whirring sound preceeds the ctcle stop nad light blinking. Pressing the button for 5 seconds causes the flashing light to extinguish but the sound continues untill the unit stops. It does not complete the full cycle. Your help would be appreciated. Tony


... Whirlpool Dishwashers

We have had three electrical problems in the past 6 months. This one has the "Clean" indicator repeatedly light flashing in a pattern of 6 flashes and then one flash. The dishwasher will not start any cycle, so is out of commission. I am ready to throw this thiing out! Unit is about 3 years old. Model: 665-13422K701


Hi,Most if these models were made by Whirlpool and the flashing clean light is a common error code for them.If the clean light is the one flashing then your dishwasher could have a heater circuit problem (depending on the age) or this cou ... Kenmore Dishwashers

HAVE AEG F406601M PNC91123471900 . WILL NOT DO ANYTHING. HAS 4 LIGHTS ON R H SIDE OF CONTROL PANEL,THE TOP 2 LIGHTS OF THE 4 FLASH WHEN MACHINE ON ALONG WITH THE LIGHT THAT INDICATES PROG SELECTED.


... AEG 23 in. F44080I-A Aluminum Built-in Dishwasher

ZANUSSI DE6544 drying & end of prog indicator lights flashing


... Zanussi 24 in. DE6544 Built-in Dishwasher

Flashing indicator light


Follow the next steps and fix it. God bless you\012 \012 \012 \012 \012 Heating Element Assembly\012 \012 \012 \012 \012 \012 \012 ... Dishwashers

The salt and drying indicator lights are flashing on my Hotpoint LFS 114 dishwasher


... Dishwashers

Wash/rinse, drying and end indicator lights flash simultaneously


... Miele Dishwashers

Have a Whirlpool dishwasher, model 920. indicator lights flash.


... Dishwashers

Electrolux ESL63010 integrated dishwasher 10 months old- works for a few seconds, then stops and beeps continously. & the End indicator light flashes once. I turn it off, cancel programme, set it again, shut the door -it starts and goes on to complete the programme and washes the dishes perfectly. It has been doing this 'performance' for a week now -every time I use it- can you shed any light please


... Electrolux Dishwashers

My frigidaire dishwasher PLD2855RFC0 intermittently either stops during the cycle or ends the cycle with the code PF flashing in the timer window along with the "High temp wash" and "No heat dry lights" flashing. What does this indicate and what is the fix?


... Frigidaire Dishwashers

Whirlpool APD5550 Dishwasher, cycle does not start, green light on start button flashes 6 times, pauses, flashes 6 times etc. can you please give me some indication what the problem may be. Thanks


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0926 seconds