Having problems with your Dishwashers ?

My Electrolux dishwasher is saying c3 what does this mean?


Answers :

This is a 'float switch' error tip the machine to the side and see if water dribbles out of the bottom. If so then locate and stop the leak, dry the water and you should be fine. Be aware that sometimes the leak can be caused by a strangely packed plate or bowl etc. If no water the switch itself could be faulty(unlikely)
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Electrolux dishwasher is saying c3 what does this mean?


This is a 'float switch' error tip the machine to the side and see if water dribbles out of the bottom. If so then locate and stop the leak, dry the water and you should be fine. Be aware that sometimes the leak can be caused by a strangely packed pl ... Dishwashers

My dishwasher will not start. It is a frigidaire / electrolux FDB1050REQ. I have checked thepower....and reset the circuit breaker.......then pushed the start button.....the light comes on on the front of the washer like normal but no water starts filling. I have jiggled the anti water overfill device but still nothing. HELP!!! The front of the dishwasher says Frigidaire, however, the inside of the door where the model# is says Electrolux


... Frigidaire Dishwashers

What does error Version 77 mean on an Electrolux Dishwasher mean


... Dishwashers

I have an Electrolux dishwasher Model # EIDW6305GS1. I am getting an error "01", which means a leak is detected. It did this 5 months ago and the repair man replaced the pump and control panel. Now, after it happened again, I contacted Electrolux. The sent me a Leak Repair Kit, but with no instructions. I contacted Electrolux again and they said that they could not provide the installation guide. Can you help me located the installation guide or offer assistance?


... Dishwashers

I have an electrolux dishwasher dx302wj*03 model. The fault code 50 is showing. Does this mean the control panel is faulty or the pump needs replaced? We have been able to fix other problems our selfs from the past and we have avery good store to get all the electrolux parts.


... Dishwashers

Error 1 code now says dry function - Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher


If your unit is displaying the ER01, E01, or 01 codes in the display panel you are experiencing a leak concern. The unit has detected a leak somewhere within the unit. This could be within the door seal, the tub basin itself, or in the drain lines/pu ... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Hello, Our Fagor LFA-013SS Dishwasher hasn't worked in a few days. It stopped working when it beeped 3 times after doing a load. On the machine it says if it beeps 3 times it means there's no drainage. My husband and I tried to fix it but we're not handy! So we tried calling repair companies but so far no one can repair Fagor dishwashers...help! Thanks


... Fagor LFA013 SS 23 in Builtin Dishwasher

It says error 01 - Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher


Error code 01\015\012Leak Detected - When water is detected under washer\015\012 tub. ... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

My ge dishwasher will not start its cycle when I press "Start" - the screen that usually says the time remaining says what appears to be "lh" instead. I do not see in the manual what this means!


Problem solved - I turned the power to te dishwasher at the breaker, waited about a minute, and then turned it back on. Everything worked fine after that. ... GE 24 in. GLD5500L Built-in Dishwasher

Electrolux dishwasher says clean but wont start new cycle


... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

My AEG Favorit 35085 VI dishwasher is not working properly. The manual says to turn water tap off and on but I don't know where it is. O assume they mean a tap to the machine and not to the proper


... AEG Dishwashers

It won't complete a full wash cycle keeps stopping part way through and low rinse aid, low salt lights flashing even though both are full ??? Pamphlet says this might also mean there is a kink in the inlet hose but that seems fine as well. Have had the dishwasher 3 weeks and it has completed about 4 cycles without stopping ???


Check water valve to see if it has something blocking water supply ... Dishwashers

MY NEFF DISHWASHER MODEL:S41N69N1EU SHOWS E01 CODE... WHAT DOES IT MEAN AND HOW I CAN SOLVE THIS PROBLEM...MANUAL DOES'NT SAY ANYTHING ABOUT THESE CODES...


... Dishwashers

My kenwood dishwasher is saying er4 what does that mean? model number KDW243A


... Kenwood Dishwashers

Electrolux built in ESL4115 Dishwaser:- Starts the programe briefly but stops with two intermittent audible signals when you open the door the cycle has not really started and there is water at the bottom of the dishwasher(when u refer to manual says the sink spigot is blocked or water drain hose has not been correctly laid or is bent). I have had this for just over 1 year working ok up to this point, tried to see if there is a blockage, taken pipes out doesn't appear to be any blockage also th


... Electrolux Dishwashers

I have a whirlpool dishwasher model DU1055XTPQ4 and the cleaning light remains on. The manual says check heating circuit does this mean the element is burnt out


... Whirlpool Dishwashers

I have an Electrolux Dishlex DX303 Dishwasher. Recently it has been stopping early in the cycle and the display shows -10. The selected program is flashing. The cycle will restart by pressing the program button again but it no longers wash's right through the wash pe=rogram as it is meant to. I do not have the manual to trouble shoot and find out what this means. Your help would be appreciated. Regards Peter H


Hi peter,\012according to manual book -10 is not filling water fast enough.\012check inlet hose and valve, check pressure switch and pressure SW hose and clean sump filter which located bottom of tub that plastic strainer and stainless mesh clean the ... Dishwashers

Electrolux dishwasher error c8 What does this mean please??


C8 means that at the rinse phase the boiler did not empty.The reasons are ..1) the nozzles are blockled2)Drain pump out of order3) bad lucknow you must reset c8 from the parameter in order to start again the diswas ... Electrolux 504199 Dishwasher

Hi All, we have just bought and fitted a Hoover HEDS 668-80 Dishwasher. When we tried to run the first wash, the pre-wash and wash light both light up simultaneously. The instruction manual says this means, "longer inlet time", with the possible causes "Faucets is not opened". Could anyone help? Many Thanks. Lisa. :-)


You do not have enough water pressure,, either change the water supply or check the pressure in your house should ba about 70lbs, to work the unit properly,, you could also increase the water supply from 3/8 to 1/2 inch up to the connection of the un ... LG LDF6810 Built-in Dishwasher

What does error 5 on electrolux dishwasher mean


... Electrolux Dishwashers

I have a Maytag MDBTT59AWQ dishwasher. I noticed the bottom spray arm is not turning. The wiring diagram says the motor should be 3-4 ohms. I'm reading 27 ohms. Is this really mean that the motor is bad?


... Maytag Dishwashers

Electrolux 6505GSO dishwasher. Says ERROR 01 onled panel and will not function. What is this code and how can I make the the thing work?


Dishwasher likely has leaked into drip pan underneath. Unfortunately, you need to remove dishwasher and flip onto back and remove 3 phillips screws that hold drip pan in place. Install "leak kit" to correct leak problem with this model of dishwasher. ... Electrolux 24 in. EDW5505EPS Stainless Steel Built-in Dishwasher

My smeg dwi 710 dishwasher keeps flashing on the diplay panel and won't change to another wash selection. it wont close and wont start. the light is stuck on the heaviest wash selection and just keeps flashing on and off and on and off. i have tried turning it off, keeping buttons held down and nothing seems to work. there is nothing in the manual that says what the flashing means so i dont know how to fix it.


... Smeg Dishwashers

Model LX18C Dishwasher not filling. Just makes a grinding noise. Display on panel says pd? I don't have a clue what pd means.


"PD" stands for Pump Down. The unit is trying to drain and I suspect the grinding noise is your pump running with very little water in it.\015\012\015\012 If empty, you may have water level probe issue. Open the door and look under the ... Hobart Dishwashers

What does Error code 30 mean on an electrolux inpire esf 66010 dishwasher?


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1736 seconds