Having problems with your Dishwashers ?

The tank of my toilet is leaning to one side. what should i do?


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The tank of my toilet is leaning to one side. what should i do?


... Dishwashers

Miele 646 sc plus inlet tank solonoid valve on water tank leaking. We moved the machine from one room to another and now this valve is squirting out water. We replaced both door seals thinking that was the problem, then started the machine with a side pannel removed, and saw the jet of water coming from the solonoid valve on the water inlet tank. Any ideas.


... Miele Dishwashers

I was looking at my dishwasher (lg4821st) and noticed it wasn't level. I removed the kick-plate to look at the adjustable foot. The part that the adjustable foot screws into it cracked which causes the foot to lean to one side. What is the broken part called


... Dishwashers

Hi, I have a one year old karcher k.2.360, which has worked fine up unitl now. However, when I tried to use for the first time in several months, the detergent feed doesn't work. The detrgent tank is full, and the detergent hose isn't blocked at the intake end - you can easily blow through the filter/trap. The pressure side works fine. Cheers, Nic


... Pressure Washers

I have a Karcher steam pressure washer HDS 600 Ci. The gas tank sides split .


... Pressure Washers

I have an Asko 1606 dishwasher. I had a new hot water tank installed in my house, it seems that with the water being turned back on that the black hose from the outlet side of the solenoid has come adrift (not from the solenoid but the other end), it seems that it has to be reconnected to an opaque coloured tank on the side of the machine, is that correct? re Wayne


Yes. ... Dishwashers

I have got a problem with my circuit board on my homark dw45bi any ideas where i can get a new one or fix the old one there is power going into 1 side and coming out of it but not going into the other side any ideas???


... Dishwashers

I need a manual for a GE profile side by side Profile Refrigerator. Model #'s on inside of refrigerator are: psh23pg, psh23ps, psw23ps, psc23ps, pcf23pg, pcf25ps, psc25ps, psh25pg, psh25ps The dimensions are 681/2 high bu 351/2 wide (slim fit refrig). All I need to know is where to buy one of these. This refrig. is not cooling + the icecream is turning into coup + all I can thin of is my 3 kids opening + closing it all day. I don't know where original man. is. Any ieeas where I can buy one? Than


Here is a link to get a free manual from GE's site:\015\012http://www.geappliances.com/service_and_support/literature/\015\012 ... GE Profile PDW9880NSS Stainless Steel Dishwasher

Need to find model of my DW. It is a passtrough with decal on it off and on is rigth side in electrical box. front is closed but can be opend one hadel opens both sides. pump motor below toward back not sideways. Buster is on side. is there manuals available to look up my model number/


You probably have a hobart am-12,13 or 14.Remove the front cover below the door and look to the top right for the data plate,look to the right side door top back for it or look on the outside right of the control box. ... Hobart AM14-253 Free-standing Dishwasher

Maytag dishwater WU504 - Problem: the soap dispenser cover does not move. The soap dispenser is two sided with a cover which moves from one side to the other as the machine cycles to release the soap from both sides. The cover no longer moves, and I don't know what is wrong. I would replace the whole soap dispenser, but I am wondering if it is the dispenser or whatever triggers it to move. Any information would be helpful. Thanks


... Maytag Dishwashers

Maytag Dishwasher circa 2002 - Defective Plastic rollers The plastic rollers that slide the arms of the dish rack keep breaking. I have had this dishwasher for 6yrs now and go through 1 a year. This defect is really annoying for two reasons one; the cost - $50 each - X's 6 years = $300. Secondly, the inconvenience of having a delapitated dish rack that crashes sideways - with the weight on only one side. Presently, I'm about to order my 6th one. I'd like to know if you are aware of this d


... Dishwashers

16 year old GE built-in dishwasher, model GSD900. Springs that prevent front door from falling disconnected. ALL parts APPEAR to be in good condition. I say appear in good condition because I don't know what they are supposed to look like. But I see nothing obviously broken. The 2 springs appear intact. The connecting cable is good. However one of the 2 springs is shorter than the other. It may be shorter because one is supposed to stretch to the other side of the dw? So number 1


... GE Dishwashers

The upper rack side rail is loose where it attaches to the side wall of the dishwasher. It allows the upper rack to wobble. When the dishwasher is turned on, the force of the water pushes the rack forward so it detaches from the water supply and the arm does not rotate. The arm and connection are all clear and the arm is able to rotate, so those problems are not a factor. The wheels are in good condition. The left rail is a little loose; the right one is very loose. There must be a way t


Hello melinda.... Here is a link to searspartsdirect.com ... Bosch 24 in. SHX46A02 / SHX46A06 Built-in Dishwasher

Soap dispenser need to know where the soap dispenser is all i see is a trough that says detergent on one side and the othe side is a dispenser which manual online says its for a rinseing agent


There is a screw cap on the back wall of the dishwasher,unscrew the cap and place your rinse agent in there.I groove on the door is for your dishwasher powder ... Equator 20 in. CD 400 Compact Dishwasher

I have a Pressure Washer VR2500 , 6.5 horsepower / 2500 PSI number on side 123K12-0134-E Residential - Excell. I do not know which is the oil drain plug for the Pump on the bottom. There is an Allens Wrench plug on the side. However when removed nothing comes out. There is also an Alans Wrench like plug towards the back, that does not want to come out. Which one is the correct plug and do you have a picture as I could not order an Owners Manual on-line? Please Advise!


Hi and welcome to FixYa, I am Kelly \015\012First here is the owders manual: \015\012http://www.excellpressurewasher.com/documents/p ... Comet GXD2527G Pressure Washer Pump

My T-racer is pulsating - one jet is poor, the other great. It won't spin around for cleaning - just swoops from side to side with a 2 second burst. No other problems with any other part of Karcher at all. Please help asap. Thank you Shirley


... Karcher 26410050 Pressure Washer TRacer Wide Area Surface Cleaner (T350) For Up To 2650 PSI

Hi, I got this Kelvinator dishwasher kd75. . . it switches on but doesnt seem to "take" in any water . . . I dont know how it should be used ie switch it on, turn the knob to ???? . . please assist me with some kind of manual on this machine. On the left hand side there is 2 buttons . . first one has an "E" on top and the second one is where you switch the machine on . . . Tnx!


... Dishwashers

The controls are intermittent, and at the times they fail to work the lights also fail. Always the ones (buttons)on the left side...the pots/pans side always seem to respond ... I suspect i need a new controller due likely to corrosion but is this a likely scenario? and if so, which part no.


... Whirlpool 24 in. DU910PFG Built-in Dishwasher

I have a maytag mdb4000aww dish washer. The dishes aren't getting consistently clean. I wanted to clean the trap/filter. There's two ports towards the front side. The one on the right i was able to remove and clean. The one on the left moves up and down but i can't seem to be able to remove it (without breaking it). Any advice? Thanks


What must I do if the rinse compartment is plugged???\015\012help please. My moms dishes are piling up. my hands are all pruiny from hand washing!!! ... Dishwashers

Hey Everyone! Ok try this one! I have been working on a KUDS25 Kitchenaid Dishwasher. It was leaking like a siv from the bottom. I replaced both top and bottom plastic bearings and also tightend all the screws at the bottom. Leak Gone, I thought. It now has small leaks down both sides. I have since been told by the owner that he took the door apart himself. I pulled out the dishwasher from the cabinet and ran it. I could see the leaks at the top on both sides of the door latch. I cou


Hello davidgalb. You can install a new gasket to seal the door again. That old seal is not flexible any more. That said, for my time and money I recommend a replacement dishwasher, this one has definitely seen better days. Joe ... Dishwashers

Hello, My husband bumped into our Bosch dishwasher door when it was open. It won't close now, one side is about an inch higher than the other. Also the inside of the door (not the hinge) looks bent. What can we do? Can a repairman fix the door or do we need to get a new one?


THE DOOR NEEDS TO BE RESET IN ITS POSITION.THAT A REPAIR MAN CAN DO BEST YOU GET THE AXPERT IN TO ASSIST YOU.\015\012\015\012GOODLUCK.\015\012\015\012MOHAMED ... Bosch Dishwashers

My dishlex globale 300 has a modle no that is dx300wa*02 the eco light and pump keeps running i have recieved advice to drain/dryout the kidney shapped over flow tray but mine doesn't seem to have one. i've taken off the bottom cover to get a closer look but still can't see it i've also tried tipping the washer on it's left side right side,backside and even upside down to try and drain the extra water but that has made no difference please help


Hi,\015\012Try taking the dishwasher out of its wall space and tipping it back and forth. Apparently the weight of water gathering in some component triggers the 'eco' function. Allow it to evaporate by waiting for few days. ... Dishwashers

The rubber edging that goes up one side of the main unit across the top and down the other side is loose. I can't get it to stick back on.


Hi,\015\012welcome to FixYa.\015\012\015\012The problem your describing is a common one with certain Whirlpool built dishwashers, which your Kenmore is\015\012\015\012You cna possibly remedy this by way of pulling the ga ... Kenmore 16879 Built-in Dishwasher

When I fill up both soap dispensers, only one is empty after the wash. The cover never releases the other soap. It says fill both and then cover the right side. But after the dishes are washed - the covered side is still full of soap. I've used both powder and liquid. Anybody know what to do? It is an older (don't know how old) early 80's maybe. Thanks, Wendy


Mine was just clogged. Ran thru couple times with no detergent. Used the packets and now it works just fine. ... Dishwashers

Wouldn't start. Starts immediately when I spray starter fluid into it (then stops). Disassembled carb section cleaned spider nest from intake manifold vent (suspected cause of problem. Reassembled. Now leaking fuel profusely from carb side (I think) of fuel tank bracket. Gaskets on both sides of bracket look OK but???


Definitely sounds like a gasket issue. Anytime a carb or manifold is taken apart, it's a idea to replace the gasket. Old gaskets are compressed and can compromise the seal after reassembly. A new gasket(s) will assure a proper seal and prevent lea ... Karcher 2500 PSI Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0668 seconds