Having problems with your Dishwashers ?

Swan sdw7020w The seal keeps coming off, and I have found 2 pieces of black plastic around 4 inches long in the bottom of the dishwasher which I assume have fell off, can you tell me where these are from

Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Swan sdw7020w The seal keeps coming off, and I have found 2 pieces of black plastic around 4 inches long in the bottom of the dishwasher which I assume have fell off, can you tell me where these are from

... Dishwashers

Sears dishwasher 665.15882000 part number 8268296 spinner fell off. I have the spinner. The plastic rivet fell through the bottom of the inside of the machine to who knows where. Please advise what is needed to repair spinner and if the dishwasher can run with the rivot that is somewhere out of site in the botton.

... Kenmore Dishwashers

Dishwasher AGE 86070V1 We have had a number of times now found the partly dissolved remains of the dishwasher tablet in the bottom of the dishwasher, and a white deposit over all the contents. I assume that it is being released too late in the cycle. It doesn't happen every time, but it's been enough now that we think there must be some problem with the machine.

... AEG 23 in. Favorit 86070Vi Built-In Dishwasher

A screw fell in to the bottom of my dishwasher. In trying to get it out it disappeared. In trying to find it we found another one that looked like it had been there a long time. My dishwasher is old model #DU920GWBD5. Do you think we can run the machine?

... Whirlpool Dishwashers

My dishwasher is leaking from underneath, front left as you look at it. If i go underneath it, there appears to be a seal on the outside (it does not appear to be the one that runs along the bottom of the inside of the dishwasher) that has come away at one point. Do you know a) how to get the front panel off (the bit that makes it look built in),b) how can i get another one of these seals. I assume if i get one we can just fit it into place. Many thanks, Robyn J

Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\012\012p80897 ... Neff 24 in. S5453X1 Built-in Dishwasher

The top drawer of my fisher paykel dishwasher stops during the cycle and shows an icon of a tap with a line threw it (assume that means no or low water pressure). the bottom works fine so I assume water pressure is not the issue; is there a sensor that could be bad? Also, I did switch the controllers between drawers (good instructions on the fisherpaykelparts.net website) but the problem stayed with the drawer, ruling out the controller.

Did it fill with water? could be 1 of your water valves is faulty, or the little filter for the inlet water is blocked. please reply 4 more help. i"m sure i can fix this problem for you. good luck. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a DU8000XX6 series Kenmore dishwasher that won't drain the water properly. There is about a half inch of water in the tub and the float is raised (not sitting on tub bottom). When I lift up the float a little more I can hear the float switch make. I would assume that when the water is high enough the float switch makes and energizes a solenoid valve in the drain to drain the water, but shouldn't it stay open until all the water drains? Lifting the float while the dishwasher is off wo

... Kenmore 24 in. 15142 Built-in Dishwasher

Clogged Dishwasher The water won't drain out and I believe my dishwasher is clogged up. Where do I look (I'm assuming at the bottom of the appliance) to find the clog so that I may fix it?

First - if you have air gap on top of your kitchen sink, remove the cap and check if there is a ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Portible whirlpool dishwasher smelling like melting plastic when it runs. I have already check to see if anything has fell to the element in the bottom and it apears to be clear. any ideas

... Whirlpool 24 in. Portable Dishwasher Dishwasher

Rollers fell off my lower basket of my dishwasher. Need to get a new basket for bottom.

Hi,\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you with the online buying...How to Buy ... GE Nautilus 24" Built-in Dishwasher

Two little white balls fell out of my Kitchin Aide dishwasher and Im assuming they belong withing. Need a quick schematic Kitchenaid Whisper Quiet Plus

... KitchenAid Dishwashers

My Bosch Dishwasher SGS53E72AU has water left in the bottom on the quick programmes, but not on the longer, hotter ones. There is no blockage of the pipes and the pump is working OK. I have to assume that the electronics have dumped some of the programming. Could you confirm that I have to acquire a new timer/electronics package from somewhere? Or is there an easier and cheaper fix? Many thanks. Hope to hear from you soon.

... Dishwashers

EDW5500DSS wont completely drain water Okay so now that my dishwasher runs, when it finishes a cycle it has a nice puddle of water at the bottom that never drains completely out. I am assuming its a relay or something because I looked for a floating switch (did not find), I can hear a pump sound as if it wants to pump the remaining water out, but, it doesn't. I really want to solve this problem soon so I can order the new door seal and needed part together. Checked the line out and of course i

The srainer over the pump could be clogged not letting the water drain quick enough. Be sure the screen is cleane out. I believe you would have already checked and cleaned this. I believe it is the impeller on the pump that pumps the water that is ei ... Dishwashers

Kenmore Model 1590 Dishwasher, 1985, sitting unused since about 1994. Takes water into tub but never goes through any washing/rinsing cycles; water stands in bottom (I stop it below door level). A click, like a solenoid activation from the timer area, but motor never does anything. Removed the shroud covering what I assume is the impeller, which was stuck, but freed it by turning several times...made no difference. Suggestions??

... Kenmore Dishwashers

Have a Kenmore dishwasher #665.1677993, approx. 13 years old. Upon starting new cycle the pump turns on for a few short seconds, then off, then after a couple minutes it goes on again for a few seconds then off, then later in the cycle it does stay on for a longer period of time. In conjuntion with this intermitent problem it has begun leaking out the bottom of the front door. I have checked drain line, check valve, strainer/screen and vent in the door. I assume it is an electrical issue?

... Kenmore Dishwashers

How do I re-secure the bottom spray arm on my Miele Novotronic dishwasher?I assume some sort of clip has broken or come loose and now it is completely loose leading to none of the spray arms working.

You can't it is factory pressed.you need to replace the dishwasher. ... Miele 23 in. Novotronic G841 Built-In Dishwasher

The spinner fell off on the bottom of my dishwasher and I dont know how to fix it. What do I do?

... Frigidaire Dishwashers

I purchased a diswasher (Hotpoint)about 1-1.5 years ago. It's model # is HDA3400G02CC and its SS# is TH887451Y. I don't think I registered it. No Matter, Two days ago, my garbage disposal stopped working. I checked the outlet. It had power. The switch to the Disposal was next to the outlet. I assumed that the switch was wired from the outlet. It wasn't. Bottom line, the switch nut was loose. I tightened it and problem solved. When I turned on the dishwasher, nothing happened. It acts like

I purchased your service (telephone support) and the dishwasher expert contacted me. We discussed the issue, he made recommendations. I followed his advise and solved the problem. Before I could recontact him, he called to follow up on my progress. ... GE Dishwashers

I have model DU810SWPU3 Whirlpool dishwasher that is 1 yr old. Plastic dishes appear to have a film on them when cycle is complete. The water also seems to drain slowly. I assume that what appears to be the filter needs to cleaned but I'm not sure how to remove it to clean it. Is the plastic area with all of the square holes on the bottom of the appliance the filter? That part is what seems to be clogged. Thanks!

The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the ... Tappan 18 in. MDR251RE Built-in Dishwasher

BOSCH SGS6302GB I took the front door cover off my dishwasher and 2 clearish plastic grommits fell out from the bottom (each side) of the door. I cant see how they fit back in. Can you help me?

Hi nikkij\015\012\015\012 It is simple to put them back on. the plastic pices fit on the bottom of the hinges. there is a cut out where they fit in. when you look at the door at the bottom you will see the hinges and the cut outs, the ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

Asko 1555 Dishwasher will not drain. Bottom of kick panel pan will fill with water triping the float switch?, leaving an error code. Is it safe to assume that the out pump needs replacing. I had the kick panel off and smacked the motor housing a few times and it ran for a few loads, but is now again stopped working.

It might be the pump, or it might be an obstruction elsewhere. If you have an air gap on your sink/counter top, open it and check for debris. If it is clear, unscrew the main filter basket. There is a black plug on the left side of the bottom well ... Dishwashers

Nasty dishwasher there is nasty wet grunge at the bottom of the door, around the place the heating unit in the bottom of the dishwasher. half the time the dishes are clean in the bottom of the dishwasher. half the heating element is melted..for some reason...what do i do. the dishwasher still works, if we make sure the dishes are clean before they go in. using more for a sanitation thing than a dishwasher. can ya'll help me?

Sounds like your heating element is broken and you should replace it to prevent a possible fire hazard. \015\012You can replace the element easily for not alot of cash. You'll need to pick up a new one at an appliance parts store, just bring them the ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I have a SHU3032UC BOSH Dishwasher for a couple of years now. Always worked as expected. Latetly, the dishwasher never stops. It looks stuck on an "unknown cycle"... The cycle dial stays at the "bottom" cycle (there's nothing written). If I turn it 1-2 "clicks", the dishwasher continues its work and ultimatly finishes with very good cleaning results. Once, I open the dishwasher when it was stuck in the "bottom" position, and there was hot watter at the bottom. Here's what I've tried so

Hello, welcome to FixYa.\015\012\015\012Based on you description of the timer not advancing I suspect the thermostat isn't satisfied when heating the water.\015\012\015\012The SHU 30** unit`s with a mechanical timer have very few if any, issues with ... Dishwashers

Pieces of broken glass fell through openings in bottom of dishwsh

... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

I have a GE potscrubber Dishwasher Model # GSD3630ZZ3WW it has been leaking from the bottom for about a week. I took the bottom off tonight and ran the dishwasher so that I could see where it is leaking from. It is not a hose but the leak seems to be coming from the back of the motor or pump fan where it goes into that plastic housing that attaches to the bottom of the dishwasher seems to be leaking in the very center of that housing where the motor shaft enters the housing. Water is just spray

... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1465 seconds