Having problems with your Dishwashers ?

AM HAVING LCD PLOBLEM WITH MY PHONE LG GD 510 WHERE CAN I GET THE LCD? AM STAYING IN PORTSHEPSTON IN SOUTH AFRICA.


Answers :

Go to www.partselect.com and get it

God bless you
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

AM HAVING LCD PLOBLEM WITH MY PHONE LG GD 510 WHERE CAN I GET THE LCD? AM STAYING IN PORTSHEPSTON IN SOUTH AFRICA.


Go to www.partselect.com and get itGod bless you ... Dishwashers

Kenmore Ultra wash III will no longer stay connected to faucet after filling...what part should I replace the hose or the faucet adaptor? When we turn the faucet on to start up the dishwasher it falls off...when we finally get it to stay connected with water on...it will fill but then falls off again...get it to stay on, it empties, but then after it has completed filling up again it disconnects from the faucet.


If your adapter that hooks up to the faucet has 4 little white plastic jaws inside it then it can be rebuilt. there is a kit that replaces those 4 jaws, the spring, the attaching clip and the internal seal.. usually runs around 10 buks or so. if i wa ... Kenmore Dishwashers

I have a magtag quiet 100 series that has a broken handle but still shuts tight and seems to lock yet. Problem seems to be that the rinse only light will stay on for quite a long time and won't let me hit the wash button. When the rinse only light does go off, if I hit the wash button it starts but then switches to rinse only. Sometimes I can get lucky and get it to stay on wash after the rinse button is off for some time. Any suggestions?


... Maytag 24 in. DWD1500A Built-in Dishwasher

I have a Kitchen Aid KUDS03CTSS3 dishwasher. Dirty water is staying at the bottom and nothing comes out the drain hose during the entire cycle. The drain hose is looped above the kitchen P-trap, although for a time it wasn't. I use a wet vac to get the water out but there is still water below the fine filter. I thought if I could get the fine filter off, I could clean out the bottom as I think that it's full of crud down there that may be blocking things. I can't figure out how to get the l


Hi,Thanks for the follow up. I am glad it worked out for you. If I can Help in the future let me know. http://www.fixya.com/support/c64627-kitchen_aid ... KitchenAid 24 in. KUDP02FR Built-in Dishwasher

Powder detergent does not dispense into the dishwasher during wash cycle. The powder gets wet and stay in the dispenser and then when the drying cycle comes on it dries the powder and it becomes hard in the dispenser. The dishes are not getting clean


Hi,\012There are three common problems that cause the Soap Dispenser or Cup not toopen. I have a tip that will explain these problems in detail....Dishwasher Repair Problem ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

My Dishwasher fill hose keeps popping off and water leaking from under the dishwasher. How do we get this hose to stay on? We tried Clamping but it wont stay. Mid way through the cycle it comes off again and water fills the floor.


... Fisher and Paykel Dishwashers

MODEL#MDB7760AW CANNOT GET START BUTTON ON PANEL TO STOP BLINKING 99% OF THE TIME AND IT WILL NOT START WHILE IT IS BLINKING. HOW DO I GET IT TO JUST STAY ON AND NOT BLINK


... Maytag Dishwashers

Dishwater cycle gets stuck at 27 minutes and doesn't go beyond but continues to run, staying at 27 minutes. timing mechanism gets stuck in all cycles.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. If the cycle doesn't\015\012complete, then the first thing ... Dishwashers

My Whirlpool Quiet Partner 2 is about 2 1/2 years old. The blue "clasp" on my utensil tray came off months ago and I can't get it to stay on. Now every time I open my dishwasher,all utensils fall to the bottom. Can I get a replacement basket to fit?


Yes you can but you will need the last few digits in your model number . Off the machine itself . ... Whirlpool GU2400XTP Built-in Dishwasher

I have a SHU43C05UC/22 Bosch dishwasher that runs fine till it gets to wash then it seems to stick there. the timer times down to 1 and it stays there for a really long time. it doesn't appear that the washer ever gets out of the wash cycle. when you stop/open the door there is still soapy water in the tub. You can cancel the program and it will drain the tub fine then you have to select rinse and hold to clean out the soap out.


... Bosch 24 in. SHU43 Built-in Dishwasher

We bought an aeg favorit 50674 dishwasher ,last week and yesterday i went to open the door to get the dishes out and the door wouldnt open.i tried again but noticed that it had caught on yhe side panel and was bending the panel.not wanting to make it worse i phoned the comit store that sold me the machine they said it was not their fault and wasnt covered on the warrenty .i still cant get my dishes out cant you help.thanks caz ivey


... AEG Dishwashers

Whirlpool DU927QWDG1 Hi, The problem I'm having with my dishwasher pertains to the door cover for the area I place the soap. There is a small spring which helps the door pop open to release the soap when washing. I cant figure out how to place the spring so that the pops open.....right now when I run the unit the door stays latched and the soap doesn't get dispensed. Any ideas on how to repair this or where I could maybe get a parts manual??? Your expertise will be greatly appreciated!!!!


... Whirlpool GU2400XTP Built-in Dishwasher

I have a Fisher and Paykel DW60CDX1 dishwasher, the display originally came up eith an error code for the door, which seemed to be the problem as it restarted with some pressure on the door, then it stopped again and now there is no LCD display and no action, cycle butten lights are on but will not make a noise when pressed. We live in the bush and cannot get a easy service option. Is there a diagnostics mode I can try, although the LCD may not work?


Old question, but for anyone else, hears the answer - http://www.recalls.gov.au/content/index.phtml/itemId/1015047This model has a product recall, minehas done the same as described above, recall issued Aug 2012. ... Fisher and Paykel 23 in. DS603H W Built-in Dishwasher

I am an Australian who has bought a second hand Defy Dishmaid dishwasher from a South African work mate. It is a 2/3 year old machine that he bought over from South Africa. When he moved into a new house the machine did not fit his kitchen bench opening much to his frustration so he sold it. When placed in my kitchen it was a tight fit and upon recent inspection the floor pan of the unit, it may have buckled. It worked well until recently when we did some renovations when I needed to remove


Hi\015\012\015\012This means that the dishwasher is unable to drain water completely, you can run your washer at\015\012its hottest temperature setting with 3 cups of vinegar inside the unit. After\015\012this take off ... Dishwashers

My Whirlpool is only a couple of years old too and it does the same thing. It stays on the wash cycle and the timer stays at 79 minutes. I have to cancel the wash to get it to stop and drain. Anyone know what is wrong with it?


If the timer does not advance. It is most likely a timer motor. ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

We have a commercial Hobart dish washer Model # AM-8T2; Serial # 240461. We cannot get the wash temperature to go above 120' to 150' as the burner does not light. The pilot is on. A new thermocouple was installed but made no difference. The rinse temp goes up to 180'. How can we get the gas burner to light and stay on. Thank you. Gery Spory


Hello Gery - get the repairman back who installed that thermocouple as that repair includes making sure the unit is working properly. Most likely the thermocouple is simply not warming up enough to operate correctly. It may be that the pilot light ... Hobart Dishwashers

Honda motor wont stay running ,carb not getting enough gas to stay running


As it is gravity fed you would need to remove thfuel line from the carby to check that the fuel is geting to that point,if not removanf clean fuel .bowl and filter . if ok. then a carby service is in order ,they are not difficult but you do need comp ... Pressure Washers

I have a Kenmore Elite 665 that is almost two years old. Suddenly, last week, the top rack is not getting clean. We use a regular cycle, no heat dry. Glasses and bowls stay on the top rack stay dirty, everything on the bottom rack is clean. Is there a gasket that fails on the top rack sprinkler?


It appears your jets or riser is clogged with sediment in this instance.For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.I recommend both sites b ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Bosch exxcel multi programme ....programme gets to 1 min and then stays there. on the quick cycle on the auto cycle it gets to 60 min then returnsto 140min on the timer... thankyou


This is caused by incorrect water levels the appliance takes in too little water at final rinse and generates erro code 1 this is what you are getting it isnt 1 minute to go it will need the dishwasher equivalent of colonic irrigation several tubes w ... Bosch Dishwashers

Bosch sgs5312gb/07 dishwasher not getting hot - was stuck on rince mode - have got it off that setting - tried to use it - stays on wash and is not getting hot


If you open up the control panel (access by removing the front door panel) you'll find a circuit board and the relay. I suspect you'll find that a solder joint on the relay has burnt out - if so, easy to fix with a blob of solder - good luck ... Dishwashers

The count down timer gets to 1 stays there a long time, then resets to 23 or so, gets to 0 in about 3 hours or so. What do I need to replace? Thanks for your help.


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012Based on your description I'd say the issue is with the control. Bosch has had a history of this exact problem I'm about to lay out for you and this is the fi ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a Kenmore Ultra wash Quiet Guard 3 dishwasher and the green flashing light that states its clean stays on and stays flashing. I can not even get it to start a wash cycle. please help. What is the button sequence that everyone is talking about that clears this? Thank you.


Hi\015\012\015\012\015\012Thanks for using FixYa. To resolve this you will have to reset the console. Do this by closing\015\012the door and press these buttons in sequence...\015\012\015 ... Kenmore 24 in. 15689 Built-in Dishwasher

I am not able to get a siemens front loading washing machine at the right price. first they told me that the model was not available now the price of the model in india is too high for the features that are in it. I doubt whether it is a siemens model itself. kindly call me on 8975764416 immediately please. i tried to contact the england phone number also but it was wrongly given in the website of siemens. please help me to get WM14S79BUK or WM14S794ME model of washing machine at the right


... Siemens 24 in. SE25A266 ExtraKlasse Free-standing Dishwasher

My Bosch Millennium dishwasher SHU9905/U06 on/off switch does not always stay in the on position when pushed. Sometimes I have to push it several times to get the control panel lights to stay on. I am assuming I may need to replace it. If so, how do I remove it?


... Bosch Dishwashers

Stays on Appliance appears to be on but no lights are on. Get get it to go into a wash program. When I attempt to select a program all six options light up and flash and beep.


... Miele Optima G2430SCi Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1086 seconds