Having problems with your Dishwashers ?

Hobart amx 16

\015 What is fault U L please ?\015

Answers :

This error code:UL definitely means the unit is out of balance so make sure that the 4 \012rods with shock springs are connected and holding the tub up. If those \012check good then you probably have a bad RPS sensor. This is the part \012that senses the tubs movement clipped onto the stator motor itself and \012it tries to even out the shaking so that the unit doesn't move much. \012You can't repair this part so it would just need to be replaced.
God bless you
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bof error hobart amx

Sorry so late for the reply.Im a hobart tech and i dont recall this model of your unit,are you sure the model isnt a am-14 or am-15? ... Dishwashers

Dishwaher hobart amx 900-16 has fil displayed what does this mean?

Fil massage mean the water not came in the booster tank , maybe the water pressure is low or the solenoid valve is defective, always this massage come to me i change solenoid valve then it will work, check and tell me ... Dishwashers

Hi I have a HOBART AMX-70 and my question is does the pressure switches b3 and b4 work with water or air pressure because when i remove pipes from switches i get nothing.

Www.ukexplorers.co.uk/shop/pdf/AMX.pdfThat is link for the entire manual!B4 I do know is water pressure, ... Dishwashers

Hobart amx schematic - Dishwashers

... Dishwashers

Dishwasher Hobart AMX 10 error code #51. - Dishwashers

... Dishwashers

Looking for a hobart amx dishwasher wiring diagram from 3 phase converting to single phase

Sr. we are using Hobart dish /w but not working this properly .when i start d/w display red light coming but not green light also heater working water coming can you help me ... Hobart Dishwashers


... Dishwashers

Hi i would like to thank the experts who gave me lot of hepl regarding my HOBART AMX-70 dishwaser. Final question the pressure switches b3 and b4 do they work with water or air pressure [meaning how do they get activated. Once again thanks for all the help.

Hi,\015\012 \015\012Thanks for writing to Fixya.com.\015\012 \015\012The inlet valve is energized directly by pressure switches B4 (31-32) and B3 (21-22). These contact ... Dishwashers

Hobart amx 16

This error code:UL definitely means the unit is out of balance so make sure that the 4 \012rods with shock springs are connected and holding the tub up. If those \012check good then you probably have a bad RPS sensor. This is the part \012that sens ... Dishwashers

Amx 1300 hobart dishwasher is not cleaning dishes

... Dishwashers

Hi after i have drained my hobart amx 70 dishwasher it doesnt refill with water,the inlet valve is ok

When the washer doesn't fill, either the water inlet valves are not getting power, or the water level or water temperature sensors are dirty or faulty. ... Dishwashers

Hobart LXI you seem to know a lot about the hobart, maybe you can help me. My hobart Lxi high temp is just now out of warranty, i am mechanically inclined, and need to adjust my detergent and rinse aid pumps. How difficult is this and how can i go about doing so. Both the pumps are running too much product.

Question--As of today if you look at the display does it read add detergent or add rinse aid?Im asking you this because theres a chemical pump circuit board that senses the chemicals on this d/w.And if the d/w displays those the d/w will keep dumping ... Dishwashers

Hobart LXi Dr Op will not turn OFF? Any suggestions before calling Hobart Service??

... Hobart Dishwashers LXIH-4 Undercounter Dishwasher Lxih4

Hobart lx18 What is the expected cost to repair Hobart lx18 with code P2?

$0. Clean the probes. Two in back right corner. Two under the front screen. Use a green scrubby.\015\012\015\012If the problem persists, check where the water comes into the machine. There is a screen on the hose that clogs up and starves ... Hobart 24 in. LXIC-5 Built-in Dishwasher

Hobart dishwaser hi guys, we have a hobart dishwasher and it is coming up with an error saying bof, any idea what this means? thanks gareth

Hi,i just read your issue.im a hobart service tech and fix these units all the time.what model do you have and are you sure the error is bof?let me know,i can tell you all the info,error codes about hobart dishwashers. ... Dishwashers

Hobart lx 18 does not drain - Hobart 24 in. LXIC-5 Built-in Dishwasher

I'm assuming you're not seeing any error codes such as E0, E1, E2, etc. which could be related to water level probes. Be sure all probes are clean, free of lime/scale buildup which can interfere with the machine's water level detection.\015\01 ... Hobart 24 in. LXIC-5 Built-in Dishwasher

Whare can I get a Hobart lx1 service manual. - Hobart LXIC-6 Dishwasher

You cant get a service manual for the lxih warewasher ... Hobart LXIC-6 Dishwasher

Looking for a hobart H65 manual - Hobart Dishwashers

... Hobart Dishwashers

LX-18 Hobart need 2 detergent pumps. Can I buy these aftermarket or must they come from hobart

... Hobart 24 in. LXIC-5 Built-in Dishwasher

Where can I get a wiring diagram for for a Hobart Model #CL44E. The plate on the dishwasher said the wiring diagram is: F17927B. I calle Hobart but they said they couldn't help me.

... Hobart Dishwashers

Hobart Dishwasher We have an old smaller built-in dishwasher at our church (Hobart model WM5H). It doesn't stop spraying water if you open the door to remove a rack of dishes to put the next rack in like it is supposed to. One member thought it may be the Electrical Timer Switch? Would this be a fairly easy repair?

I guess I didn't understand your statement of the problem. If you know that the washer has gone through an entire cycle, and it is time to take out the RINSED dishes, yet the washer turns on when you do this, play with the door interlock and the doo ... Hobart Dishwashers

Hobart washer fm-40 overflowing - Hobart Dishwashers

... Hobart Dishwashers

Looking for parts list for hobart cna models - Hobart Dishwashers

... Hobart Dishwashers

Hobart LX30 Hey I just bought a Hobart Lx30 and we don't have a power source that can handle the 50 amp requirement. We got it at an extremely good price so we are trying to work around it. I was told that disconnecting the water heater would allow it to work in a standard 120 volt outlet. I did that and now I have another issue. The machine wont run unless the water is 160 degrees. How do i disconnect the sensor that restricts the temp so that I can run the machine at a lower temp?

Hopefully you took the suggestion to run the correct 50 amp 208-240 service to the unit.Converting the unit to an LX30C has a couple of pitfalls. The LX30C is connected directly to the incoming water supply, which should run 120-140 degre ... Hobart 24 in. LXIH-3 Built-in Dishwasher

What does bof mean on a hobart dish washer - Hobart Dishwashers

... Hobart Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0217 seconds