Having problems with your Dishwashers ?

Clear code for 630.1390 - Dishwashers


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have dishwasher (Electrolux) model ewdw6505gs. How do i clear a code of 01? I fixed the disposal clog and the dishwasher automatically drained the water in the bottom. I just can figure out how to clear the error code.


I should inform you that that is a "leak detection error".\015\012You should check some of those hose clamps, they may not be tightened properly.\015\012\015\012Regards ... Electrolux Dishwashers

A feew weeks ago Smeg STA6047 dishwasher stopped in the beginning of the programme after approx. ten minutes, and gave the error code E9. There had been clearly water in the machine, but maybe not enough and the detergent box was not open. However, when technician came by two weeks after, the dishwasher worked and he said it was in order. But only after being used only once, the same problem reappeared. First the washer gave the error code E8, on the second try E9. And now it does not start at a


As you know E9 is linked to the water inlet problem. \015\012\015\012There are two scenarios here - 1) Are you using the Aqua-Stop safety system? If this is trigerring then it can shut the inlet water. The reason it can trigger is if the ... Smeg Dishwashers

How to clear a delonghi dishwasher error code 4


Try removing all dish trays and salt softner lid, check if the salt softner compartment is full of water, if so place the machine on its side and allow all the water to drain from the compartment, once this is done your machine should be good to go. ... Dishwashers

At 2 minutes left in the wash cycle, the quick rinse light starts blinking and the timer goes to 0. My dishwasher is a Whirlpool Quiet Partner IV gu1500xtkbo dishwasher. I'm assuming the blinking light is an error code. What does it mean?


... Whirlpool Dishwashers

Clean light blinking a 7 code for a kitchen aid dishwasher model KUDM01TJWH. What is the sequence to clear, what are the blink code explanations?


The blinking clean light is an interruption in the dishwasher program that either indicates a malfunction, or it can be a simple glitch. The following link explains how you may be able to clear the blinking clean light problem:\015\012\015\012 ... Dishwashers

Prima dishwasher clear code e4 - Dishwashers


... Dishwashers

Lg dishwasher trouble codes how to clear - Dishwashers


My LG dishwasher error code TE and won't start- can you tell me what the problem is? ... Dishwashers

Dishwasher was blinkin clean light 7 times in a row. After researching internet was able to clear codes. However went to run dishwasher again and it buzzes when in wash cylcle without washing


Sounds like you are not getting water to machine or it is not recirculating. Check for water and recirculation noise while running. ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

I have a Neff s4457n0gb/32 dishwasher that will not complete the cycle as it finishes on 0:01 minutes remaining on rinse and not moving to drying. I have to press the reset to clear the display to 0:00. If you've any idea how I can correct this problem that would be most helpful.


... Neff 24 in. S4457 Built-in Dishwasher

Doesn't appear to be washing the dishes like the spray arms are not working. I can hear water filling and it does drain but soap is still on the door and in the bottom of dishwasher itself. Ran diag on it and it came back clear (0). I have a Bosch SHU5315U6.


Sounds as if the pump motor has gone out in the machine. What happens is once the water reaches a certain level the machine goes into clean mode. This means the pump the forces the water into the machine isn't working. The timer actuates this pump ... Dishwashers

Clear code for 630.1390 - Dishwashers


... Dishwashers

My dishwasher is displaying an F2 error code, how do I clear it?


This means the rotor at the base of the drawer is causing some fault. Check the cavity after taking the rotor out and see if there is anything obstructing. Usually a seed or bone fragment. if problem persists you will have to replace the rotor.se ... Fisher and Paykel Dishwashers

I have an error code on the dishwasher that reads EE do you know how to clear this? thanx


Sounds like we need to try to reset the system!Unplug the appliance and wait a 5 minutes then restart it.If you can't reach the plug, use the breaker to cut the ... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

LG Dishwasher - LD1415T1 - ERROR CODE: OE. Ive cleared the filters and still not working?


\015\012Hi,\015\012"OE" indicates outlet error in your dishwasher. Check that you can hear water pumping first if not check your drain lines for obstruction.\015\012\015\012 ... Dishwashers

How do i clear an E1 error code on my smeg dishwasher.


... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

How to clear pe error code on samsung dishwasher


... Samsung DMT800RHS Dishwasher

I have a Bosch Dishwasher Model # SHU43C that is not washing properly. Some dishes are not being cleaned if we don't pre-scrub or rinse. There are no error codes on the panel. During the cycle I hear the pump motor starting and stopping repeatedly on about 1 second intervals. I suspect it may be starved for inlet water. I checked the inlet water line and it is clear. We use well water that occassionally has some iron sediment in it and it plugged the inlet water screen for our washing mach


Hi,\015\012It is very possible that the screen is plugged...most inlet valves have a screen just like your washer does. I would at least remove the hose/pipe and check the flow...and check for a screen. \015\012Also the solenoid can get j ... Bosch 24 in. SHU43 Built-in Dishwasher

Good afternoon, I have a miele dishwasher model G685SC. It's old but a good machine. It has a fault code of three dashes ( ie:- - - ) and will not start. I have tried switching on and off but it doesn't clear. Is there a reset available or a way of fixing this. I think mechanically it is ok. Thank you


... Miele Dishwashers

Candy CDI 45 E4 code on dishwasher not clearing after blockage appears to be gone


I have E1 code on Candy dishwasher CDI 45 ... Candy Dishwashers

4 error code on Kenmore dishwasher How do i reset after the drain is cleared?


Http://www.applianceaid.com/partsmanual.html\012\012\012http://www.applianceaid.com ... Kenmore 24 in. 15252 / 15254 / 15259 Built-in Dishwasher

Bosch Exxcel Dishwasher (Enr SMS53E12GB/01 FD 9002) bought in July 2010. Error code 15 and "Check Water Supply" light on at same time. Have checked in-line filter in tap connection and all clear, water pressure OK, no kinks/twists in supply hose. Any help would be greatly appreciated - I'll have to call Customer Service in the end as it's outside of my problem-solving ability, but would like to check whether there's a known reset or fix I can try before I call.


... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher

LG LDF8812ST dishwasher not washing: reports LE error code. Fills and drains ok. Impeller is clear, removed inside housing - no obstructions. Synchronous motor works. Tested main motor - appears to be good. Motor is not locked, looks to be in excellent condition. No shorts to ground, continuity across three main pins - not sure what the other 4 are for. My guess would be the PCB, but not sure how to test this. How do I determine if the PCB is bad?


... LG LDF9810ST Built-in Dishwasher

How do I clear a U4 code and F9 cde - Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher


... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

We have just purchased an IQ100 SE26N250G Dishwasher and are having problems in setting the washing programme. We have followed the instructions in the leaflet but the dishwasher will on wash on 40 degrees and cannot be cleared or changed to any other programme. Also, the information in the instruction manual that accompanied the dishwasher is not at all clear and is rather confusing as it shows that to clear an existing programme you simultaneously press and hold the 2nd and 4th buttons out o


... Siemens Dishwashers

Electrolux dishwasher EWDW6505 has error code 01 and then version 62 but don't know how to reset it


... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1826 seconds